Mount - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

mount

mount { disk0 | disk1 }
Syntax
no mount { disk0 | disk1 } [ force ]
Command introduced in JUNOSe Release 8.0.0.
Release Information
Mounts the specified flash card. If the card was not safely unmounted previously,
Description
the command also performs disk and file system integrity checks before mounting
the card and permitting user access. The no version prepares the card for safe
unmounting by rejecting requests to open files and waiting for currently open files
to close; only then is the user notified that the unmounted card can be safely ejected.
Options
Privileged Exec
Mode
1336
mount
disk0 Specifies flash card in slot 0 of the SRP module; although this option is
displayed by the CLI, it is rejected when specified because disk0 is required for
router operation
disk1 Specifies flash card in slot 1 of the SRP module; supported only on the
E120 router and the E320 router
force Forces the dismount even when files on the disk are open for modification