Ip Ftp Source-Address - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ip ftp source-address

ip ftp source-address sourceAddress
Syntax
no ip ftp source-address [ sourceAddress ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies an operational interface by IP address as the source interface in FTP packets
Description
sent via the router's FTP client. The no version restores the source address in the
FTP packets to that on which the FTP connection is made.
Options
Global Configuration
Mode
806
ip ftp source-address
sourceAddress Source IP address