Mpls Policy-Parameter Reference-Rate - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

mpls policy-parameter reference-rate

mpls policy-parameter reference-rate parameterName [ increase ] value
Syntax
no mpls policy-parameter reference-rate parameterName [ increase value ]
Command introduced in JUNOSe Release 8.1.0.
Release Information
Creates an MPLS policy parameter for a reference rate; creates a global parameter
Description
if it does not exist. The no version removes the policy parameter and its contents;
if used with the increase keyword, decreases the value.
Options
Interface Configuration
Mode
Related Topics
1392
mpls policy-parameter reference-rate
parameterName Name of policy parameter up to 40 characters
increase Increments the existing reference rate value
value Value of the reference rate parameter, in the range 0–4292967295
Creating a Classifier Group for a Policy List