Mpls Match Traffic-Class - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

mpls match traffic-class

mpls match traffic-class className color { green | yellow | red } set exp-bits bitValue
Syntax
no mpls match traffic-class className color { green | yellow | red }
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets the EXP bits in the MPLS shim header of outgoing MPLS packets that match the
Description
specified combination of traffic class and color. The no version reverts to the default
behavior for traffic matching the specified traffic class and color combination. The
default behavior sets the EXP bits to 000 for traffic entering an LSP and has no effect
on the EXP bits for transit traffic.
Options
Global Configuration
Mode
1388
mpls match traffic-class
className Name of a traffic class; the router supports up to eight traffic classes
green Sets packet color to green, indicating a low drop preference
yellow Sets packet color to yellow, indicating a medium drop preference
red Sets packet color to red, indicating a high drop preference
bitValue Value in the range 0–7 that sets the corresponding binary value
(000–111) for the three EXP bits