Mpls Ldp Session Retries - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

Chapter 13: M Commands

mpls ldp session retries

mpls ldp session retries retryNum
Syntax
no mpls ldp session retries
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the number of attempts that will be made to set up an LDP session. The
Description
no version restores the default value, 0, meaning that the attempts will be made
until successful.
retryNum Number of attempts in the range 0–65535
Options
Global Configuration
Mode
1373
mpls ldp session retries