Download Print this page

Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

For e series broadband service routers

Table Of Contents

page of 1488

/ 1488
Contents
Table of Contents
Bookmarks

Table of Contents

Advertisement

Quick Links

Download this manual

JUNOSe

Software

for E Series

Broadband Services Routers

Command Reference N to Z

Release 11.1.x

Juniper Networks, Inc.

1194 North Mathilda Avenue

Sunnyvale, California 94089

USA

408-745-2000

www.juniper.net

Published: 2010-04-08

Table of Contents

Advertisement

Table of Contents

Need help?

Need help?

Do you have a question about the JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 and is the answer not in the manual?

Questions and answers

Summary of Contents for Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010

Page 1 JUNOSe Software for E Series Broadband Services Routers Command Reference N to Z Release 11.1.x Juniper Networks, Inc. 1194 North Mathilda Avenue Sunnyvale, California 94089 408-745-2000 www.juniper.net Published: 2010-04-08...
Page 2 Products made or sold by Juniper Networks or components thereof might be covered by one or more of the following patents that are owned by or licensed to Juniper Networks: U.S. Patent Nos. 5,473,599, 5,905,725, 5,909,440, 6,192,051, 6,333,650, 6,359,479, 6,406,312, 6,429,706, 6,459,579, 6,493,347, 6,538,518, 6,538,899, 6,552,918, 6,567,902, 6,578,186, and 6,590,785.
Page 3 AND (B) YOU MAY CONTACT JUNIPER NETWORKS REGARDING LICENSE TERMS. 1. The Parties. The parties to this Agreement are (i) Juniper Networks, Inc. (if the Customer’s principal office is located in the Americas) or Juniper Networks (Cayman) Limited (if the Customer’s principal office is located outside the Americas) (such applicable entity being referred to herein as “Juniper”), and (ii) the person or organization that originally purchased from Juniper or an authorized Juniper reseller the applicable license(s) for use of the Software (“Customer”)
Page 4 (“GPL”) or the GNU Library General Public License (“LGPL”)), Juniper will make such source code portions (including Juniper modifications, as appropriate) available upon request for a period of up to three years from the date of distribution. Such request can be made in writing to Juniper Networks, Inc., 1194 http://www.gnu.org/licenses/gpl.html...
Page 5 agreements relating to the Software, whether oral or written (including any inconsistent terms contained in a purchase order), except that the terms of a separate written agreement executed by an authorized Juniper representative and Customer shall govern to the extent such terms are inconsistent or conflict with terms contained herein.
Page 7 Abbreviated Table of Contents About the Documentation xxxix Part 1 Commands, N to Z Chapter 1 Command Reference Topics Chapter 2 N Commands Chapter 3 O Commands Chapter 4 P Commands Chapter 5 Q Commands Chapter 6 R Commands Chapter 7 S Commands Chapter 8 T Commands...
Page 8 JUNOSe 11.1.x Command Reference Guide N to Z viii...
Page 9: Table Of Contents
Table of Contents About the Documentation xxxix E Series and JUNOSe Documentation and Release Notes ......xxxix Audience ....................xxxix E Series and JUNOSe Text and Syntax Conventions ........xxxix Obtaining Documentation ................xli Documentation Feedback ................xli Requesting Technical Support ................xli Self-Help Online Tools and Resources ............xlii Opening a Case with JTAC ..............xlii Part 1 Commands, N to Z...
Page 10 JUNOSe 11.1.x Command Reference Guide N to Z neighbor graceful-restart restart-time ............41 neighbor graceful-restart stalepaths-time ............42 neighbor ibgp-singlehop ................43 neighbor lenient ....................44 neighbor local-as ...................45 neighbor maximum-orf-entries ..............46 neighbor maximum-prefix ................47 neighbor maximum-update-size ..............48 neighbor next-hop-self ..................49 neighbor next-hop-unchanged ...............50 neighbor passive ...................51 neighbor password ..................52 neighbor peer-group ..................53...
Page 11 Table of Contents nsf interface wait ...................93 nsf t1 ......................94 nsf t2 ......................95 nsf t3 ......................96 ntp access-group ...................97 ntp broadcast ....................98 ntp broadcast-client ..................99 ntp broadcast-delay ..................100 ntp disable ....................101 ntp enable ....................102 ntp master ....................103 ntp server ....................104 ntp server enable ..................105 ntp source ....................106 Chapter 3...
Page 12 JUNOSe 11.1.x Command Reference Guide N to Z path ds1|e1 description ................140 path ds1|e1 framing ..................141 path ds1|e1 loopback ..................142 path ds1|e1 shutdown .................144 path ds1|e1 snmp trap link-status ...............145 path ds1 fdl ....................146 path ds1 fdl carrier ..................147 path ds1 fdl string ..................148 path ds1 fdl transmit ...................149 path ds1 remote-loopback ................150 path ds3 ......................151...
Page 13 Table of Contents ping mpls l2transport ..................196 ping mpls l3vpn ..................199 ping mpls rsvp tunnel ..................201 ping mpls vpls .....................203 policer ......................206 policy-parameter hierarchical ..............207 pos description ....................208 pos framing ....................209 pos scramble-atm ..................210 ppp aaa-profile ....................211 ppp authentication ..................212 ppp chap-challenge-length ................213 ppp description ...................214 ppp dos-protection-group ................215...
Page 14 JUNOSe 11.1.x Command Reference Guide N to Z pppoe service-name-table ................253 pppoe-service-name-table ................254 pppoe sessions ....................255 pppoe subinterface ..................256 pppoe url .....................257 pre-authenticate ..................258 preference ....................259 prefix ......................260 pre-share .....................262 pre-share-masked ..................263 priority burst ....................264 priority over-subscription-factor ..............265 priority rate ....................266 privilege ......................267 privilege-group alias ..................268 privilege-group membership ...............269...
Page 15 Table of Contents Chapter 6 R Commands radius accounting server ................306 radius acct-session-id-format ...............307 radius algorithm ..................308 radius authentication server ................309 radius calling-station-delimiter ..............310 radius calling-station-format ................311 radius client ....................313 radius connect-info-format ................314 radius disconnect client ................315 radius dsl-port-type ..................316 radius dynamic-request server ..............317 radius ethernet-port-type ................318 radius icr-partition-accounting ..............319...
Page 16 JUNOSe 11.1.x Command Reference Guide N to Z receive version ....................360 receive-window ...................361 redistribute ....................362 redistribute isis ....................365 redistribute isis ip ..................366 red-mark .....................367 redundancy ....................368 redundancy force-switchover ..............369 redundancy lockout ..................370 redundancy revert ..................371 redundancy revertive ..................372 redundant-port ....................373 redundant-port force-failover ...............374 reference-bandwidth ...................375 reference-rate ....................376...
Page 17 Table of Contents rtr reaction-configuration test-failure ............416 rtr reset .......................417 rtr schedule ....................418 rtr schedule life ...................419 rtr schedule restart-time ................420 rtr schedule start-time .................421 run ......................422 Chapter 7 S Commands sample ......................424 samples-of-history-kept ................425 schedule macro ...................426 scheduler-profile ..................427 scramble .....................428 sdh ......................429 secret ......................430...
Page 18 JUNOSe 11.1.x Command Reference Guide N to Z set admission-bandwidth ................468 set as-path prepend ..................469 set automatic-tag ..................470 set comm-list delete ..................471 set community ....................472 set dampening ....................473 set dhcp relay ....................474 set dhcp relay agent sub-option ..............476 set dhcp relay assign-giaddr-source-ip ............477 set dhcp relay broadcast-flag-replies ............478 set dhcp relay giaddr-selects-interface ............479 set dhcp relay layer2-unicast-replies ............480...
Page 19 Table of Contents show aaa dhcpv6-delegated-prefix ..............522 show aaa duplicate-address-check ...............523 show aaa intf-desc-format ................524 show aaa ipv6-nd-ra-prefix ................525 show aaa model ..................526 show aaa name-servers ................527 show aaa profile ..................528 show aaa qos downstream-rate ..............529 show aaa route-download ................530 show aaa route-download routes ..............531 show aaa route-download routes global ............532 show aaa service accounting interval ............533...
Page 20 JUNOSe 11.1.x Command Reference Guide N to Z show bgp ipv6 neighbors paths ..............584 show bgp ipv6 neighbors received-routes ............585 show bgp ipv6 neighbors routes ..............587 show bgp ipv6 network ................589 show bgp ipv6 next-hops ................591 show bgp ipv6 paths ...................592 show bgp ipv6 peer-group ................593 show bgp ipv6 quote-regexp ...............594 show bgp ipv6 regexp .................596...
Page 21 Table of Contents show dhcp count ..................646 show dhcp-external ..................649 show dhcp host ...................650 show dhcp relay ..................653 show dhcp relay proxy statistics ..............654 show dhcp relay statistics ................655 show dhcp server ..................656 show dhcp summary ...................657 show dhcp vendor-option ................658 show dos-protection-group ................659 show drop-profile ..................660 show dvmrp destination profile ..............661...
Page 22 JUNOSe 11.1.x Command Reference Guide N to Z show ip .......................702 show ip address ..................703 show ip as-path-access-list ................704 show ip bgp ....................705 show ip bgp advertised-routes ..............708 show ip bgp aggregate-address ..............712 show ip bgp cidr-only ..................713 show ip bgp community ................715 show ip bgp community-list ................718 show ip bgp dampened-paths ..............721 show ip bgp filter-list ...................723...
Page 23 Table of Contents show ip dvmrp routeNextHop ..............782 show ip explicit-paths ..................783 show ip extcommunity-list ................784 show ip flow ....................785 show ip forwarding-table slot ..............786 show ip http ....................787 show ip igmp ....................788 show ip igmp groups ...................789 show ip igmp interface ................790 show ip igmp mapped-oif ................791 show ip igmp membership ................792 show ip igmp oif-map .................793...
Page 24 JUNOSe 11.1.x Command Reference Guide N to Z show ip pim ....................833 show ip pim auto-rp ..................834 show ip pim bsr ..................835 show ip pim data-mdt .................836 show ip pim dense-mode sg-state ...............837 show ip pim interface ..................838 show ip pim neighbor .................839 show ip pim remote-neighbor ..............840 show ip pim rp ....................841 show ip pim rp-hash ..................842...
Page 25 Table of Contents show ipsec option ..................886 show ipsec transform-set ................887 show ipsec transport interface ..............888 show ipsec transport profile ................889 show ipsec tunnel ..................890 show ipsec tunnel profile ................891 show ipv6 ....................892 show ipv6 access-list ...................893 show ipv6 address ..................894 show ipv6 dhcpv6-local binding ..............895 show ipv6 dhcpv6-local dns-domain-searchlist ..........896 show ipv6 dhcpv6-local dns-servers ............897...
Page 26 JUNOSe 11.1.x Command Reference Guide N to Z show ipv6 profile ..................937 show ipv6 protocols ..................938 show ipv6 redistribute .................939 show ipv6 route ..................940 show ipv6 routers ..................942 show ipv6 rpf-route ..................943 show ipv6 static ..................945 show ipv6 traffic ..................946 show ipv6 tunnel-route ................947 show ipv6 udp statistics ................948 show isis database ..................949...
Page 27 Table of Contents show license mobile-ip home-agent ............992 show line console 0 ..................993 show line vty ....................994 show log configuration ................995 show log data ....................996 show mirror log ...................997 show mirror rules ..................998 show mirror subscribers ................999 show mirror trap ..................1000 show mpls ....................1001 show mpls binding ..................1002 show mpls cross-connects atm ..............1004...
Page 28 JUNOSe 11.1.x Command Reference Guide N to Z show qos-interface-set ................1048 show qos-interface-superset ..............1049 show qos-parameter ..................1050 show qos-parameter-define ...............1052 show qos-port-type-profile .................1053 show qos-profile ..................1054 show qos queue-thresholds ...............1055 show qos scheduler-hierarchy ..............1056 show qos shared-shaper ................1058 show qos-shared-shaper-control ..............1060 show queue-profile ..................1061 show radius acct-session-id-format ............1062 show radius algorithm ................1063...
Page 29 Table of Contents show rtr configuration ................1102 show rtr history ..................1103 show rtr hops ....................1104 show rtr operational-state ................1105 show running-configuration ..............1106 show schedule macro ................1107 show scheduler-profile ................1108 show secrets ....................1109 show secure classifier-list ................1110 show secure policy-list ................1111 show service config-monitor-periodicity ............1112 show service-management owner-session ..........1113 show service-management service-definition ..........1114...
Page 30 JUNOSe 11.1.x Command Reference Guide N to Z show terminal ...................1154 show terminate-code .................1155 show timing ....................1156 show track ....................1157 show track brief ..................1158 show traffic-class ..................1159 show traffic-class-group ................1160 show tunnel-server ..................1161 show users ....................1162 show utilization ..................1163 show version .....................1164 show virtual-router ..................1165 show vlan bulk-config ................1166 show vlan profile ..................1167...
Page 31 Table of Contents snmp trap link-status .................1210 source-address ..................1211 speed ......................1212 spf-interval ....................1213 split-horizon ....................1214 srp switch ....................1215 sscc address ....................1216 sscc enable ....................1217 sscc option ....................1218 sscc protocol ipv6 ..................1219 sscc protocol lac ..................1220 sscc restart ....................1221 sscc retryTimer ..................1222 sscc sourceAddress ...................1223 sscc sourceInterface ..................1224 sscc transportRouter .................1225...
Page 32 JUNOSe 11.1.x Command Reference Guide N to Z t1 framing ....................1259 t1 lineCoding .....................1260 t1 loopback ....................1261 t1 remote-loopback ...................1263 t1 shutdown ....................1264 t1 snmp trap link-status ................1265 t1 timeslots ....................1266 t1 yellow ....................1267 table-map ....................1268 tacacs-server host ..................1269 tacacs-server key ..................1270 tacacs-server source-address ..............1271 tacacs-server timeout ................1272 tag ......................1273...
Page 33 Table of Contents trace mpls rsvp tunnel ................1319 trace mpls vpls ..................1321 traceroute ....................1323 track ......................1325 traffic-class ....................1326 traffic-class-group ..................1327 transform ....................1328 transform-set .....................1329 translate ....................1330 transmit-delay ...................1331 traps ......................1332 trigger .......................1334 trigger delay ....................1335 triggered-update-disable ................1336 ttl ......................1337 tunnel ......................1338 tunnel checksum ..................1339 tunnel destination ..................1340 tunnel destination backup .................1342...
Page 34 JUNOSe 11.1.x Command Reference Guide N to Z tx-connect-speed-method ................1375 type ......................1376 Chapter 9 U, V, W, and Y Commands 1377 ubr ......................1378 udp-port ....................1379 undebug ip bgp ..................1380 undebug ip mbgp ..................1381 undebug ip ospf ..................1382 undebug ip pim ..................1383 undebug ip rip ...................1384 undebug ipv6 ospf ..................1385 undebug ipv6 pim ..................1386...
Page 35 Table of Contents write memory ...................1424 yellow-mark ....................1425 Part 2 Index Index ......................1429 xxxv Table of Contents...
Page 36 JUNOSe 11.1.x Command Reference Guide N to Z xxxvi Table of Contents...
Page 37: List Of Tables
List of Tables About the Documentation xxxix Table 1: Notice Icons ..................xl Table 2: Text and Syntax Conventions ............xl Part 1 Commands, N to Z Chapter 1 Command Reference Topics Table 3: Interface Types and Specifiers for ERX7xx Models, ERX14xx Models, and ERX310 Router ..................5 Table 4: Interface Types and Specifiers for E120 Router and E320 Router .....................13...
Page 38 JUNOSe 11.1.x Command Reference Guide N to Z xxxviii List of Tables...
Page 39: About The Documentation
If the information in the latest release notes differs from the information in the documentation, follow the JUNOSe Release Notes. To obtain the most current version of all Juniper Networks® technical documentation, see the product documentation page on the Juniper Networks website at http://www.juniper.net/techpubs/...
Page 40: Table 1: Notice Icons
JUNOSe 11.1.x Command Reference Guide N to Z Table 1: Notice Icons Icon Meaning Description Informational note Indicates important features or instructions. Caution Indicates a situation that might result in loss of data or hardware damage. Warning Alerts you to the risk of personal injury or death. Laser warning Alerts you to the risk of personal injury from a laser.
Page 41: About The Documentation
CD-ROMs or DVD-ROMs, see the Offline Documentation page at http://www.juniper.net/techpubs/resources/cdrom.html Copies of the Management Information Bases (MIBs) for a particular software release are available for download in the software image bundle from the Juniper Networks Web site at http://www.juniper.net/...
Page 42: Self-Help Online Tools And Resources
7 days a week, 365 days a year. Self-Help Online Tools and Resources For quick and easy problem resolution, Juniper Networks has designed an online self-service portal called the Customer Support Center (CSC) that provides you with the following features: Find CSC offerings: http://www.juniper.net/customers/support/...
Page 43: Part 1 Commands, N To Z
Part 1 Commands, N to Z Command Reference Topics on page 3 N Commands on page 21 O Commands on page 107 P Commands on page 125 Q Commands on page 287 R Commands on page 305 S Commands on page 423 T Commands on page 1251 U, V, W, and Y Commands on page 1377 Commands, N to Z...
Page 44 JUNOSe 11.1.x Command Reference Guide N to Z Commands, N to Z...
Page 45: Chapter 1 Command Reference Topics
Chapter 1 Command Reference Topics Using the no Version Versus the default Version of Commands on page 3 Deprecated Commands on page 4 Filtering show Commands on page 4 Interface Types and Specifiers on page 5 Using the no Version Versus the default Version of Commands Most router configuration commands have a no version, which you can use to negate a command (or a portion of it specified by an optional keyword) or restore its default setting.
Page 46: Deprecated Commands
JUNOSe 11.1.x Command Reference Guide N to Z Deprecated Commands A command that has been deprecated in a release or in a particular configuration mode returns a notice when you issue the command manually: NOTICE: This command is obsolete. It may be completely removed from a subsequent software release.
Page 47: Interface Types And Specifiers
Table 3 on page 5 lists the interface specifiers for each type of interface on ERX7xx models, ERX14xx models, and the Juniper Networks ERX310 Broadband Services Router. NOTE: On ERX7xx models, ERX14xx models, and the ERX310 router, you can use the atm slot/port/vpi/vci interface specifier format as an alternative to the atm slot/port.subinterface format with the specific show interface and show subinterface...
Page 48 JUNOSe 11.1.x Command Reference Guide N to Z Table 3: Interface Types and Specifiers for ERX7xx Models, ERX14xx Models, and ERX310 Router (continued) Interface Type Description Interface Specifier Example To configure an ATM interface or atm 3/2.6 interface subinterface: subinterface slot/port[.subinterface ] slot Number of the chassis slot in the range 0–6 (ERX7xx models), 0–13...
Page 49 Chapter 1: Command Reference Topics Table 3: Interface Types and Specifiers for ERX7xx Models, ERX14xx Models, and ERX310 Router (continued) Interface Type Description Interface Specifier Example fastEthernet IEEE 802.3 slot/port[.subinterface1[.subinterface2 ] ] fastEthernet Fast 3/2.6.20 slot Number of the chassis slot in the Ethernet range 0–6 (ERX7xx models), 0–13 (FE)
Page 50 JUNOSe 11.1.x Command Reference Guide N to Z Table 3: Interface Types and Specifiers for ERX7xx Models, ERX14xx Models, and ERX310 Router (continued) Interface Type Description Interface Specifier Example gigabitEthernet IEEE 802.3 slot/port[.subinterface1[.subinterface2 ] ] gigabitEthernet Gigabit 3/0.6.20 slot Number of the chassis slot in the Ethernet range 0–6 (ERX7xx models), 0–13 (GE)
Page 51 Chapter 1: Command Reference Topics Table 3: Interface Types and Specifiers for ERX7xx Models, ERX14xx Models, and ERX310 Router (continued) Interface Type Description Interface Specifier Example mlppp Multilink bundle-name mlppp chicago bundle-name Name of the bundle interface mplsL2shim MPLS shim slot/port[.subinterface ] mplsL2shim 3/2.1 interface...
Page 52 JUNOSe 11.1.x Command Reference Guide N to Z Table 3: Interface Types and Specifiers for ERX7xx Models, ERX14xx Models, and ERX310 Router (continued) Interface Type Description Interface Specifier Example Packet over slot/port[.subinterface ] pos 3/2 SONET slot Number of the chassis slot in the (POS) range 0–6 (ERX7xx models), 0–13 interface...
Page 53 Chapter 1: Command Reference Topics Table 3: Interface Types and Specifiers for ERX7xx Models, ERX14xx Models, and ERX310 Router (continued) Interface Type Description Interface Specifier Example cOCx/STMx: slot/port:path-channel/path-payload/ serial unframed tributary-group/tributary-number/ 3/0:10/1/2/2/1 channelNumber[.subinterface ] slot Number of the chassis slot in the range 0–6 (ERX7xx models), 0–13 (ERX14xx models), and 0–2 (ERX310 router)
Page 54 JUNOSe 11.1.x Command Reference Guide N to Z Table 3: Interface Types and Specifiers for ERX7xx Models, ERX14xx Models, and ERX310 Router (continued) Interface Type Description Interface Specifier Example cOCx/STMx: slot/port:path-channel/ds3-channel-number serial 3/0:1/1 unchannel i zed [.subinterface ] slot Number of the chassis slot in the range 0–6 (ERX7xx models), 0–13 (ERX14xx models), and 0–2 (ERX310 router)
Page 55: Table 4: Interface Types And Specifiers For E120 Router And E320 Router
Chapter 1: Command Reference Topics Table 3: Interface Types and Specifiers for ERX7xx Models, ERX14xx Models, and ERX310 Router (continued) Interface Type Description Interface Specifier Example sonet – path Path layer of slot/port:path-channel sonet 3/0:2 layer slot Number of the chassis slot in the SONET/SDH range 0–6 (ERX7xx models), 0–13 interface...
Page 56 JUNOSe 11.1.x Command Reference Guide N to Z Table 4: Interface Types and Specifiers for E120 Router and E320 Router (continued) Interface Type Description Interface Specifier Example ATM interface To configure an ATM interface or subinterface: atm 3/1/7.6 subinterface slot/adapter/port[.subinterface ] slot Number of the chassis slot in the range 0–5 (E120 router) and 0–5 or 11–16 (E320 router)
Page 57 Chapter 1: Command Reference Topics Table 4: Interface Types and Specifiers for E120 Router and E320 Router (continued) Interface Type Description Interface Specifier Example fastEthernet IEEE 802.3 slot/adapter/port fastEthernet 6/0/0 Fast slot Number of the chassis slot, either Ethernet (for Fast Ethernet 6 or 7 (FE) management port...
Page 58 JUNOSe 11.1.x Command Reference Guide N to Z Table 4: Interface Types and Specifiers for E120 Router and E320 Router (continued) Interface Type Description Interface Specifier Example IEEE bundle-name[.subinterface ] lag paris.2 802.3ad link bundle-name Name of the bundle aggregation subinterface Number of the LAG group (LAG) subinterface in the range 1–2147483647...
Page 59 Chapter 1: Command Reference Topics Table 4: Interface Types and Specifiers for E120 Router and E320 Router (continued) Interface Type Description Interface Specifier Example Packet over slot/adapter/port pos 5/0/0 SONET slot Number of the chassis slot in the (POS) range 0–5 (E120 router) and 0–5 or interface 11–16 (E320 router) adapter Identifier for the IOA within the...
Page 60 JUNOSe 11.1.x Command Reference Guide N to Z Table 4: Interface Types and Specifiers for E120 Router and E320 Router (continued) Interface Type Description Interface Specifier Example sonet – section Section layer slot/adapter/port sonet 3/0/0 layer of a slot Number of the chassis slot in the SONET/SDH range 0–5 (E120 router) and 0–5 or interface...
Page 61 Chapter 1: Command Reference Topics Table 4: Interface Types and Specifiers for E120 Router and E320 Router (continued) Interface Type Description Interface Specifier Example tunnel Tunnel tunnel-type:tunnel-name[.subinterface] tunnel gre:boston interface tunnel-type Type of the tunnel: dvmrp, gre, l2tp, or mpls tunnel-name Name of the tunnel subinterface For GRE tunnels, number of the subinterface in the range...
Page 62 JUNOSe 11.1.x Command Reference Guide N to Z Interface Types and Specifiers...
Page 63: Chapter 2 N Commands
Chapter 2 N Commands...
Page 64: Nas-Port-Type Atm
JUNOSe 11.1.x Command Reference Guide N to Z nas-port-type atm nas-port-type atm { adsl-cap | adsl-dmt | idsl | sdsl | xdsl | cable | wireless-80211 | Syntax wireless-cdma | wireless-umts | wireless-1x-ev | wireless-other | iapp | value } no nas-port-type atm Command introduced before Release 7.1.0.
Page 65: Nas-Port-Type Ethernet
Chapter 2: N Commands nas-port-type ethernet nas-port-type ethernet { cable | wireless-80211 | wireless-cdma | wireless-umts | Syntax wireless-1x-ev | wireless-other | iapp | value } no nas-port-type ethernet Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the RADIUS NAS-Port-Type attribute (61) used for Ethernet interfaces. The Description no version removes the NAS-Port-Type setting.
Page 66: Neighbor
JUNOSe 11.1.x Command Reference Guide N to Z neighbor For ANCP: Syntax [ no ] neighbor neighborName For OSPF: neighbor ipAddressOspf [ pollinterval seconds | priority number ] no neighbor ipAddressOspf [ pollinterval | priority ] For RIP: [ no ] neighbor ipAddressRip Command introduced before JUNOSe Release 7.1.0.
Page 67: Neighbor Activate
Chapter 2: N Commands neighbor activate [ no | default ] neighbor { ipAddress | ipv6Address | peerGroupName } activate Syntax Command introduced before JUNOSe Release 7.1.0. Release Information ipv6Address variable added in JUNOSe Release 8.0.0. Specifies a peer or peer group with which routes of the current address family are Description exchanged.
Page 68: Neighbor Advertise-Map
JUNOSe 11.1.x Command Reference Guide N to Z neighbor advertise-map [ no | default ] neighbor { ipAddress | ipv6Address | peerGroupName } Syntax advertise-map advertiseMapName { exist-map | non-exist-map } conditionMapName [ seq sequenceNumber ] Command introduced in JUNOSe Release 9.0.0. Release Information Specifies a peer or peer group within the current address family to which routes Description...
Page 69: Neighbor Advertisement-Interval
Chapter 2: N Commands neighbor advertisement-interval neighbor { ipAddress | ipv6Address | peerGroupName } advertisement-interval seconds Syntax no neighbor { ipAddress | ipv6Address | peerGroupName } advertisement-interval [ seconds ] Command introduced before JUNOSe Release 7.1.0. Release Information ipv6Address variable added in JUNOSe Release 8.0.0. Sets the minimum interval between the sending of BGP updates for a given prefix.
Page 70: Neighbor Allow
JUNOSe 11.1.x Command Reference Guide N to Z neighbor allow [ no ] neighbor peerGroupName allow accessListName Syntax [ max-peers maxNumberDynamicPeers ] Command introduced before JUNOSe Release 7.1.0. Release Information Configures the peer group so that it accepts inbound connections from any remote Description address that matches the access list.
Page 71: Neighbor Allowas-In
Chapter 2: N Commands neighbor allowas-in neighbor { ipAddress | ipv6Address | peerGroupName } allowas-in number Syntax no neighbor { ipAddress | ipv6Address | peerGroupName } allowas-in [ number ] Command introduced before JUNOSe Release 7.1.0. Release Information ipv6Address variable added in JUNOSe Release 8.0.0. Specifies the number of times that the AS path of a received route may contain the Description recipient BGP speaker’s AS number and still be accepted.
Page 72: Neighbor As-Override
JUNOSe 11.1.x Command Reference Guide N to Z neighbor as-override [ no | default ] neighbor { ipAddress | ipv6Address | peerGroupName } as-override Syntax Command introduced before JUNOSe Release 7.1.0. Release Information ipv6Address variable added in JUNOSe Release 8.0.0. Prevents routing loops between routers within a VPN by substituting the current Description router’s AS number in routing tables for that of the neighboring router.
Page 73: Neighbor Bfd-Liveness-Detection
Chapter 2: N Commands neighbor bfd-liveness-detection neighbor { ipAddress | ipv6Address | peerGroupName } bfd-liveness-detection Syntax [ minimum-interval minInterval | [ minimum-receive-interval minRecInterval ] [ minimum-transmit-interval minTransInterval ] ] [ multiplier multiplierValue ] { no | default } neighbor { ipAddress | ipv6Address | peerGroupName } bfd-liveness-detection Command introduced in JUNOSe Release 7.2.0.
Page 74 JUNOSe 11.1.x Command Reference Guide N to Z BFD liveness detection interval; equal to the number of BFD packets that can be missed before the BFD session is declared down; number in the range 1–255; default value is 3 Address Family Configuration, Router Configuration Mode neighbor bfd-liveness-detection...
Page 75: Neighbor Capability
Chapter 2: N Commands neighbor capability For all capabilities except ORF: Syntax [ no | default ] neighbor { ipAddress | ipv6Address | peerGroupName } capability { deprecated-dynamic-capability-negotiation | dynamic-capability-negotiation | four-octet-as-numbers | negotiation | route-refresh | route-refresh-cisco } For the ORF capability: neighbor { ipAddress | ipv6Address | peerGroupName } capability orf { prefix-list | prefix-list-cisco } { send | receive | both } { no | default } neighbor { ipAddress | ipv6Address | peerGroupName } capability orf...
Page 76 JUNOSe 11.1.x Command Reference Guide N to Z route-refresh Indicates support of route-refresh messages that request the peer to resend its routes to the router, enabling the BGP speaker to apply modified or new policies to the routes when it receives them again route-refresh-cisco Indicates support of Cisco-proprietary (prestandard) route-refresh messages for interoperability with older Cisco devices orf Indicates support of cooperative route filtering to install a BGP speaker’s...
Page 77: Neighbor Default-Originate
Chapter 2: N Commands neighbor default-originate neighbor { ipAddress | ipv6Address | peerGroupName } default-originate Syntax [ route-map mapTag ] { no | default } neighbor { ipAddress | ipv6Address | peerGroupName } default-originate [ route-map [ mapTag ] ] Command introduced before JUNOSe Release 7.1.0.
Page 78: Neighbor Description
JUNOSe 11.1.x Command Reference Guide N to Z neighbor description neighbor { ipAddress | ipv6Address | peerGroupName } description text Syntax no neighbor { ipAddress | ipv6Address | peerGroupName } description Command introduced before JUNOSe Release 7.1.0. Release Information ipv6Address variable added in JUNOSe Release 8.0.0. Associates a textual description with a BGP neighbor.
Page 79: Neighbor Distribute-List
Chapter 2: N Commands neighbor distribute-list neighbor { ipAddress | ipv6Address | peerGroupName } distribute-list Syntax accessListName { in | out } no neighbor { ipAddress | ipv6Address | peerGroupName } distribute-list [ accessListName ] { in | out } Command introduced before JUNOSe Release 7.1.0.
Page 80: Neighbor Ebgp-Multihop
JUNOSe 11.1.x Command Reference Guide N to Z neighbor ebgp-multihop [ no | default ] neighbor { ipAddress | ipv6Address | peerGroupName } ebgp-multihop Syntax [ ttl ] Command introduced before JUNOSe Release 7.1.0. Release Information ipv6Address variable added in JUNOSe Release 8.0.0. Allows BGP to accept route updates from external peers residing on networks that Description are not directly connected.
Page 81: Neighbor Filter-List
Chapter 2: N Commands neighbor filter-list To apply an access list: Syntax neighbor { ipAddress | ipv6Address | peerGroupName } filter-list accessListName { in | out } no neighbor { ipAddress | ipv6Address | peerGroupName } filter-list [ accessListName ] { in | out } To assign a weight: neighbor { ipAddress | ipv6Address | peerGroupName } filter-list accessListName weight value...
Page 82: Neighbor Graceful-Restart
JUNOSe 11.1.x Command Reference Guide N to Z neighbor graceful-restart [ no | default ] neighbor { ipAddress | ipv6Address | peerGroupName } graceful-restart Syntax Command introduced before JUNOSe Release 7.1.0. Release Information ipv6Address variable added in JUNOSe Release 8.0.0. Enables the BGP graceful restart capability for the peer or peer group, which enables Description BGP to maintain its forwarding state during a peer restart, avoiding network-wide...
Page 83: Neighbor Graceful-Restart Restart-Time
Chapter 2: N Commands neighbor graceful-restart restart-time neighbor { ipAddress | ipv6Address | peerGroupName } graceful-restart restart-time Syntax seconds no neighbor { ipAddress | ipv6Address | peerGroupName } graceful-restart restart-time [ seconds ] Command introduced before JUNOSe Release 7.1.0. Release Information ipv6Address variable added in JUNOSe Release 8.0.0.
Page 84: Neighbor Graceful-Restart Stalepaths-Time
JUNOSe 11.1.x Command Reference Guide N to Z neighbor graceful-restart stalepaths-time neighbor { ipAddress | ipv6Address | peerGroupName } graceful-restart Syntax stalepaths-time seconds no neighbor { ipAddress | ipv6Address | peerGroupName } graceful-restart stalepaths-time [ seconds ] Command introduced before JUNOSe Release 7.1.0. Release Information ipv6Address variable added in JUNOSe Release 8.0.0.
Page 85: Neighbor Ibgp-Singlehop
Chapter 2: N Commands neighbor ibgp-singlehop [ no | default ] neighbor { ipAddress | ipv6Address | peerGroupName } ibgp-singlehop Syntax Command introduced in JUNOSe Release 8.0.0. Release Information Configures an internal BGP peer to be a single-hop (non-multihop) peer. The no Description version restores the default, wherein internal peer cannot be a single hop.
Page 86: Neighbor Lenient
JUNOSe 11.1.x Command Reference Guide N to Z neighbor lenient [ no ] neighbor { ipAddress | ipv6Address | peerGroupName } lenient Syntax Command introduced before JUNOSe Release 7.1.0. Release Information ipv6Address variable added in JUNOSe Release 8.0.0. Enables lenient behavior to make the BGP speaker more tolerant of malformed packet Description and finite state machine errors generated by peer, so that the speaker can attempt recovery from the error and avoid bringing down the session.
Page 87: Neighbor Local-As
Chapter 2: N Commands neighbor local-as neighbor { ipAddress | ipv6Address | peerGroupName } local-as number Syntax no neighbor { ipAddress | ipv6Address | peerGroupName } local-as [ number ] Command introduced before JUNOSe Release 7.1.0. Release Information ipv6Address variable added in JUNOSe Release 8.0.0. Assigns a local AS number for the specified BGP peer or peer group.
Page 88: Neighbor Maximum-Orf-Entries
JUNOSe 11.1.x Command Reference Guide N to Z neighbor maximum-orf-entries neighbor { ipAddress | ipv6Address } maximum-orf-entries maximum Syntax no neighbor { ipAddress | ipv6Address } maximum-orf-entries [ maximum ] Command introduced before JUNOSe Release 7.1.0. Release Information ipv6Address variable added in JUNOSe Release 8.0.0. Sets the maximum number of ORF entries of a particular type that are accepted from Description the specified neighbor.
Page 89: Neighbor Maximum-Prefix
Chapter 2: N Commands neighbor maximum-prefix neighbor { ipAddress | ipv6Address | peerGroupName } maximum-prefix maximum Syntax [ threshold ] [ strict ] [ warning-only ] no neighbor { ipAddress | ipv6Address | peerGroupName } maximum-prefix [ maximum ][ threshold ] [ strict ] [ warning-only ] Command introduced before JUNOSe Release 7.1.0.
Page 90: Neighbor Maximum-Update-Size
JUNOSe 11.1.x Command Reference Guide N to Z neighbor maximum-update-size neighbor { ipAddress | ipv6Address | peerGroupName } maximum-update-size value Syntax no neighbor { ipAddress | ipv6Address | peerGroupName } maximum-update-size [ value ] Command introduced before JUNOSe Release 7.1.0. Release Information ipv6Address variable added in JUNOSe Release 8.0.0.
Page 91: Neighbor Next-Hop-Self
Chapter 2: N Commands neighbor next-hop-self [ no | default ] neighbor { ipAddress | ipv6Address | peerGroupName } next-hop-self Syntax Command introduced before JUNOSe Release 7.1.0. Release Information ipv6Address variable added in JUNOSe Release 8.0.0. Forces the BGP speaker to report itself as the next hop for an advertised route it Description advertised to a neighbor.
Page 92: Neighbor Next-Hop-Unchanged
JUNOSe 11.1.x Command Reference Guide N to Z neighbor next-hop-unchanged [ no | default ] neighbor { ipAddress | ipv6Address | peerGroupName } Syntax next-hop-unchanged Command introduced in JUNOSe Release 7.1.0. Release Information ipv6Address variable added in JUNOSe Release 8.0.0. Configures BGP to not modify the next hop sent to the BGP peer.
Page 93: Neighbor Passive
Chapter 2: N Commands neighbor passive [ no | default ] neighbor { ipAddress | ipv6Address | peerGroupName } passive Syntax Command introduced before JUNOSe Release 7.1.0. Release Information ipv6Address variable added in JUNOSe Release 8.0.0. Configures the BGP speaker so that it only accepts inbound connections from, but Description does not initiate outbound connections to, the peer or peer group.
Page 94: Neighbor Password
JUNOSe 11.1.x Command Reference Guide N to Z neighbor password neighbor { ipAddress | ipv6Address | peerGroupName } password [ 0 | 8 ] string Syntax no neighbor { ipAddress | ipv6Address | peerGroupName } password Command introduced before JUNOSe Release 7.1.0. Release Information ipv6Address variable added in JUNOSe Release 8.0.0.
Page 95: Neighbor Peer-Group
Chapter 2: N Commands neighbor peer-group Creating a peer group: Syntax neighbor peerGroupName peer-group no neighbor peerGroupName [ peer-group ] Assigning members to a peer group: neighbor { ipAddress | ipv6Address } peer-group peerGroupName no neighbor { ipAddress | ipv6Address } peer-group [ peerGroupName ] Command introduced before JUNOSe Release 7.1.0.
Page 96: Neighbor Peer-Type
JUNOSe 11.1.x Command Reference Guide N to Z neighbor peer-type neighbor peerGroupName peer-type { internal | external | confederation } Syntax no neighbor peerGroupName peer-type Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the type for the peer group. The no version removes the configuration. Description peerGroupName Name of a BGP peer group.
Page 97: Neighbor Prefix-List
Chapter 2: N Commands neighbor prefix-list neighbor { ipAddress | ipv6Address | peerGroupName } prefix-list Syntax prefixListName { in | out } no neighbor { ipAddress | ipv6Address | peerGroupName } prefix-list [ prefixListName ] { in | out } Command introduced before JUNOSe Release 7.1.0.
Page 98: Neighbor Prefix-Tree
JUNOSe 11.1.x Command Reference Guide N to Z neighbor prefix-tree neighbor { ipAddress | ipv6Address | peerGroupName } Syntax prefix-tree prefixTreeName { in | out } no neighbor { ipAddress | ipv6Address | peerGroupName } prefix-tree [ prefixTreeName ] { in | out } Command introduced before JUNOSe Release 7.1.0.
Page 99: Neighbor Remote-As
Chapter 2: N Commands neighbor remote-as neighbor { ipAddress | ipv6Address | peerGroupName } remote-as number Syntax no neighbor { ipAddress | ipv6Address } [ remote-as [ number ] ] no neighbor peerGroupName remote-as [ number ] Command introduced before JUNOSe Release 7.1.0. Release Information ipv6Address variable added in JUNOSe Release 8.0.0.
Page 100: Neighbor Remove-Private-As
JUNOSe 11.1.x Command Reference Guide N to Z neighbor remove-private-as [ no | default ] neighbor { ipAddress | ipv6Address | peerGroupName } Syntax remove-private-as Command introduced before JUNOSe Release 7.1.0. Release Information ipv6Address variable added in JUNOSe Release 8.0.0. Removes private AS numbers in updates sent to external peers.
Page 101: Neighbor Rib-Out Disable
Chapter 2: N Commands neighbor rib-out disable [ no | default ] neighbor { ipAddress | ipv6Address | peerGroupName } rib-out disable Syntax Command introduced before JUNOSe Release 7.1.0. Release Information ipv6Address variable added in JUNOSe Release 8.0.0. Disables storage of routes to the Adj-RIBs-Out table (disables rib-out) for the neighbor Description or peer group.
Page 102: Neighbor Route-Map
JUNOSe 11.1.x Command Reference Guide N to Z neighbor route-map neighbor { ipAddress | ipv6Address | peerGroupName } route-map mapTag Syntax { in | out } no neighbor { ipAddress | ipv6Address | peerGroupName } route-map [ mapTag ] { in | out } Command introduced before JUNOSe Release 7.1.0.
Page 103: Neighbor Route-Reflector-Client
Chapter 2: N Commands neighbor route-reflector-client [ no | default ] neighbor { ipAddress | ipv6Address | peerGroupName } Syntax route-reflector-client Command introduced before JUNOSe Release 7.1.0. Release Information ipv6Address variable added in JUNOSe Release 8.0.0. Configures a router as a BGP route reflector and configures the specified neighbor Description as its client.
Page 104: Neighbor Send-Community
JUNOSe 11.1.x Command Reference Guide N to Z neighbor send-community [ no | default ] neighbor { ipAddress | ipv6Address | peerGroupName } send-community Syntax [ standard | extended | both ] Command introduced before JUNOSe Release 7.1.0. Release Information ipv6Address variable added in JUNOSe Release 8.0.0.
Page 105: Neighbor Send-Label
Chapter 2: N Commands neighbor send-label [ no ] neighbor { ipAddress | ipv6Address | peerGroupName } send-label Syntax Command introduced before JUNOSe Release 7.1.0. Release Information ipv6Address variable added in JUNOSe Release 8.0.0. Configures a neighbor to distribute an MPLS label with its IPv4 and IPv6 route Description advertisements.
Page 106: Neighbor Shutdown
JUNOSe 11.1.x Command Reference Guide N to Z neighbor shutdown [ no | default ] neighbor { ipAddress | ipv6Address | peerGroupName } shutdown Syntax Command introduced before JUNOSe Release 7.1.0. Release Information ipv6Address variable added in JUNOSe Release 8.0.0. Shuts down the specified neighbor or peer group without removing the neighbor or Description peer group configuration.
Page 107: Neighbor Site-Of-Origin
Chapter 2: N Commands neighbor site-of-origin neighbor { ipAddress | ipv6Address | peerGroupName } site-of-origin siteOfOrigin Syntax no neighbor { ipAddress | ipv6Address | peerGroupName } site-of-origin Command introduced before JUNOSe Release 7.1.0. Release Information ipv6Address variable added in JUNOSe Release 8.0.0. Specifies a site of origin that is added to the extended communities list in each route Description received from the specified peer, unless the extended communities list already...
Page 108: Neighbor Soft-Reconfiguration Inbound
JUNOSe 11.1.x Command Reference Guide N to Z neighbor soft-reconfiguration inbound [ no | default ] neighbor { ipAddress | ipv6Address | peerGroupName } Syntax soft-reconfiguration inbound Command introduced before JUNOSe Release 7.1.0. Release Information ipv6Address variable added in JUNOSe Release 8.0.0. Initiates storage of unmodified copies of routes from the specified neighbor or all Description members of the specified peer group.
Page 109: Neighbor Timers
Chapter 2: N Commands neighbor timers neighbor { ipAddress | ipv6Address | peerGroupName } timers keepaliveTime holdTime Syntax no neighbor { ipAddress | ipv6Address | peerGroupName } timers [ keepaliveTime ] [ holdTime ] Command introduced before JUNOSe Release 7.1.0. Release Information ipv6Address variable added in JUNOSe Release 8.0.0.
Page 110: Neighbor Unsuppress-Map
JUNOSe 11.1.x Command Reference Guide N to Z neighbor unsuppress-map neighbor { ipAddress | ipv6Address | peerGroupName } unsuppress-map mapTag Syntax no neighbor { ipAddress | ipv6Address | peerGroupName } unsuppress-map [ mapTag Command introduced before JUNOSe Release 7.1.0. Release Information ipv6Address variable added in JUNOSe Release 8.0.0.
Page 111: Neighbor Update-Source
Chapter 2: N Commands neighbor update-source neighbor { ipAddress | ipv6Address | peerGroupName } update-source Syntax { interfaceType interfaceSpecifier | updateSourceAddress | updateSourcev6Address } no neighbor { ipAddress | ipv6Address | peerGroupName } update-source [ interfaceType interfaceSpecifier | updateSourceAddress | updateSourcev6Address ] Command introduced before JUNOSe Release 7.1.0.
Page 112: Neighbor Weight
JUNOSe 11.1.x Command Reference Guide N to Z neighbor weight neighbor { ipAddress | ipv6Address | peerGroupName } weight value Syntax no neighbor { ipAddress | ipv6Address | peerGroupName } weight [ value ] Command introduced before JUNOSe Release 7.1.0. Release Information ipv6Address variable added in JUNOSe Release 8.0.0.
Page 113: Net
Chapter 2: N Commands [ no ] net networkEntityTitle Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Configures an IS-IS network entity title for the specified routing process. The no Description version removes a specific NET. You must specify a NET. You can add multiple manual area IDs by adding multiple NETs with the same system ID.
Page 114: Netbios-Name-Server
JUNOSe 11.1.x Command Reference Guide N to Z netbios-name-server netbios-name-server ipAddressPrimary [ ipAddressSecondary ] Syntax no netbios-name-server Command introduced before JUNOSe Release 7.1.0. Release Information Assigns a NetBIOS server to subscribers of an address pool. The no version removes Description the association between the address pool and the NetBIOS server.
Page 115: Netbios-Node-Type
Chapter 2: N Commands netbios-node-type netbios-node-type nodeType Syntax no netbios-node-type Command introduced before JUNOSe Release 7.1.0. Release Information Specifies a NetBIOS node type. The no version restores the default situation, in which Description the node type is unspecified. nodeType One of the following types of NetBIOS servers: Options b-node NetBIOS Broadcast node p-node NetBIOS Peer-to-Peer node...
Page 116: Network
JUNOSe 11.1.x Command Reference Guide N to Z network For BGP: Syntax [ no ] network { networkNumber [ [ mask ] networkMask ] | ipv6Prefix | rtfPrefix } [ route-map mapTag ] [ weight weight ] [ backdoor ] For DHCP local server: network networkAddress { networkMask | prefix } no network [ force ]...
Page 117 Chapter 2: N Commands asNumber AS number for origin of route target information, in the range 1–4294967295 extendedCommunity Two-part number in the format number1:number2 that identifies an extended community of VPNs, in the format number1 : number2, where: number1 Autonomous system (AS) number, in the range 1–4294967295, or an IP address number2 Unique integer, in the range 1–4294967295;...
Page 118: Network Area
JUNOSe 11.1.x Command Reference Guide N to Z network area [ no ] network ipNet maskWildCard area { areaId | areaIdInt } Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Defines the interfaces on which OSPF runs and the area ID for those interfaces. The Description no version deletes OSPF interfaces, ranges, and areas.
Page 119: Next-Address
Chapter 2: N Commands next-address next-address ipAddress [ [ mask ] ipMask ] [ loose ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Configures an IPv4 hop at the end of the MPLS explicit path. There is no no version. Description ipAddress Address of the node Options...
Page 120: Next-Hop
JUNOSe 11.1.x Command Reference Guide N to Z next-hop [ no ] [ suspend ] next-hop address [ classifier-group claclName ] Syntax [ precedence precValue ] Command introduced before JUNOSe Release 7.1.0. Release Information Defines the IP address of the next hop for an IP policy list. The no version removes Description a next-hop rule from a policy list;...
Page 121: Next-Interface
Chapter 2: N Commands next-interface [ no ] [ suspend ] next-interface interfaceType interfaceSpecifier Syntax [ next-hop nextHop ] [ classifier-group claclName ] [ precedence precValue ] Command introduced before JUNOSe Release 7.1.0. Release Information Defines an output interface for an IP policy list. When the interfaceType is a broadcast Description medium, specify a next hop using the next-hop command.
Page 122: Next-Parent
JUNOSe 11.1.x Command Reference Guide N to Z next-parent next-parent parentGroupName Syntax no next-parent Command introduced in JUNOSe Release 8.0.0. Release Information Links the current parent group to the next parent group in a hierarchy. Only external Description parent groups can be configured as next parent. The no version deletes the next parent group.
Page 123: No Area
Chapter 2: N Commands no area no area { areaId | areaIdInt } Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Removes the specified OSPF area if there are no OSPF interfaces configured in the Description area. This command has only a no version. areaId OSPF area ID in IP address format Options areaIdInt OSPF area ID as a decimal value in the range 0–4294967295...
Page 124: No Boot Hotfix All-Releases
JUNOSe 11.1.x Command Reference Guide N to Z no boot hotfix all-releases no boot hotfix hfixFilename all-releases Syntax Command introduced in JUNOSe Release 7.2.0. Release Information Disarms all armed hotfixes for all releases. This command has only a no version. Description NOTE: See also the boot hotfix command.
Page 125: No Bulkstats
Chapter 2: N Commands no bulkstats no bulkstats Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Removes all bulkstats configurations from the router at one time. This command Description has only a no version. Router Configuration Mode no bulkstats...
Page 126: No Ip Interface
JUNOSe 11.1.x Command Reference Guide N to Z no ip interface no ip interface Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Removes the IP configuration from the interface or subinterface and disables IP Description processing on the interface. This command has only a no version. Interface Configuration, Subinterface Configuration Mode no ip interface...
Page 127: No Log Filters
Chapter 2: N Commands no log filters no log filters Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Turns off all log filters. To turn off a specific filter, use the no version of the log Description severity command that you used to add the filter. This command has only a no version.
Page 128: No Radius Client
JUNOSe 11.1.x Command Reference Guide N to Z no radius client no radius client Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Unconfigures all RADIUS servers for the virtual router context and deletes the RADIUS Description client for the virtual router context. This command has only a no version. Global Configuration Mode no radius client...
Page 129: No Rtr
Chapter 2: N Commands no rtr no rtr Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Removes all RTR configuration information from the router. This command has only Description a no version. Global Configuration Mode no rtr...
Page 130: No Rtr Reaction-Configuration
JUNOSe 11.1.x Command Reference Guide N to Z no rtr reaction-configuration no rtr reaction-configuration rtrIndex Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Clears all traps for all the rtr reaction-configuration command options. This Description command has only a no version. rtrIndex Number of the operation to be configured, in the range 1–4294967295 Options Global Configuration...
Page 131: No Service-Management Subscriber-Session Force
Chapter 2: N Commands no service-management subscriber-session force no service-management subscriber-session subscriberSessionId force Syntax Command introduced in JUNOSe Release 7.2.0. Release Information Immediately terminates the specified subscriber session and deletes all service Description sessions associated with the subscriber session. This command has only a no version. subscriberSessionId ID of the subscriber session Options Global Configuration...
Page 132: Node
JUNOSe 11.1.x Command Reference Guide N to Z node [ no ] { typeOfInterface | set | superset } node [ group trafficClassGroup | Syntax scheduler-profile schedulerProfileName ]* Command introduced before JUNOSe Release 7.1.0. Release Information svlan keyword added in JUNOSe Release 7.1.0. set and superset keywords added in JUNOSe Release 9.2.0.
Page 133: Notification Id
Chapter 2: N Commands notification id notification id { mteEventSetFailure | mteTriggerFailure | mteTriggerFalling | Syntax mteTriggerRising } no notification [ id ] Command introduced before JUNOSe Release 7.1.0. Release Information Specifies a trap notification for an event. The no version removes the notification. Description id MIB object for notification use Options...
Page 134: Nsf Ietf
JUNOSe 11.1.x Command Reference Guide N to Z nsf ietf [ no ] nsf ietf Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables the IS-IS graceful restart mechanism on the router as defined in RFC Description 3847 Restart Signaling for Intermediate System to Intermediate System (IS-IS) (July 2004).
Page 135: Nsf Interface Wait
Chapter 2: N Commands nsf interface wait [ no ] nsf interface wait [ seconds ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the maximum amount of time, in seconds, that an IS-IS process on a Description restarting router waits for all interfaces with IS-IS adjacencies to come up before completing the restart process.
Page 136: Nsf T1
JUNOSe 11.1.x Command Reference Guide N to Z nsf t1 [ no ] nsf t1 { interval [ seconds ] | retry-times [ number ] } Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies either the interval, in seconds, between IS-IS restart requests sent by a Description restarting router on a particular interface to neighboring IS-IS routers in the network, or the number of times the restarting router resends unacknowledged restart requests...
Page 137: Nsf T2
Chapter 2: N Commands nsf t2 [ no ] nsf t2 { level-1 | level-2 } [ seconds ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the maximum amount of time, in seconds, that an IS-IS restarting router Description waits for the LSP database to synchronize.
Page 138: Nsf T3
JUNOSe 11.1.x Command Reference Guide N to Z nsf t3 [ no ] nsf t3 { manual [ seconds ] | adjacency } Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the maximum amount of time, in seconds, that the restarting router waits Description before setting the overload bit to indicate that the LSP database has not been synchronized and the IS-IS graceful restart operation has failed.
Page 139: Ntp Access-Group
Chapter 2: N Commands ntp access-group ntp access-group { peer | serve-only | serve | query-only } accessListName Syntax no ntp access-group { peer | serve-only | serve | query-only } Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the type of broadcasts that the router will accept and respond to, and Description specifies the servers from which the router will accept broadcasts.
Page 140: Ntp Broadcast
JUNOSe 11.1.x Command Reference Guide N to Z ntp broadcast [ no ] ntp broadcast [ version number ] [ pollInterval ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables NTP broadcast server on a server interface to transmit NTP broadcast packets Description periodically.
Page 141: Ntp Broadcast-Client
Chapter 2: N Commands ntp broadcast-client [ no ] ntp broadcast-client Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables an interface to receive NTP broadcasts. The no version prevents an interface Description from receiving NTP broadcasts. Interface Configuration Mode ntp broadcast-client...
Page 142: Ntp Broadcast-Delay
JUNOSe 11.1.x Command Reference Guide N to Z ntp broadcast-delay ntp broadcast-delay delayTime Syntax no ntp broadcast-delay Command introduced before JUNOSe Release 7.1.0. Release Information Sets the estimated round-trip delay between the broadcast NTP server and the router. Description The no version restores the round-trip delay to the default value, 3000 microseconds. delayTime Value in the range 0–999999 microseconds Options Global Configuration...
Page 143: Ntp Disable
Chapter 2: N Commands ntp disable [ no ] ntp disable Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Disables NTP on an interface. The no version enables NTP on an interface. The default Description setting is enable. Interface Configuration Mode ntp disable...
Page 144: Ntp Enable
JUNOSe 11.1.x Command Reference Guide N to Z ntp enable [ no ] ntp enable Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables NTP services on the router and attaches the NTP client to the current virtual Description router.
Page 145: Ntp Master
Chapter 2: N Commands ntp master [ no ] ntp master [ stratumNumber ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the stratum number of a virtual router you configured as an NTP server. Description By default, if the router is configured as an NTP server, the stratum number is set to the stratum number of the master plus one.
Page 146: Ntp Server
JUNOSe 11.1.x Command Reference Guide N to Z ntp server ntp server ipAddress [ version number ] [ prefer ] Syntax [ source interfaceType interfaceSpecifier ] no ntp server ipAddress Command introduced before JUNOSe Release 7.1.0. Release Information Specifies an NTP server for time synchronization. The source option for this command Description overrides the ntp source command.
Page 147: Ntp Server Enable
Chapter 2: N Commands ntp server enable [ no ] ntp server enable Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables a virtual router to act as an NTP server. The no version prevents a virtual Description router from acting as an NTP server. Global Configuration Mode ntp server enable...
Page 148: Ntp Source
JUNOSe 11.1.x Command Reference Guide N to Z ntp source ntp source interfaceType interfaceSpecifier Syntax no ntp source Command introduced before JUNOSe Release 7.1.0. Release Information Directs responses from all NTP servers to a specific interface. Using the source option Description with the ntp server command overrides the ntp source command.
Page 149: Chapter 3 O Commands
Chapter 3 O Commands...
Page 150: Oam Ais-Rdi
JUNOSe 11.1.x Command Reference Guide N to Z oam ais-rdi oam ais-rdi [ alarmDownCount [ alarmClearTimeout ] ] Syntax no oam ais-rdi Command introduced in JUNOSe Release 7.1.0. Release Information ATM VC Class Configuration mode added in JUNOSe Release 7.3.0. In ATM VC Configuration mode, configures surveillance parameters for alarm Description indication signal (AIS) and remote defect indication (RDI) F5 OAM fault management...
Page 151: Oam Cc
Chapter 3: O Commands oam cc oam cc [ segment | end-to-end ] { source | sink | both } Syntax no oam cc Command introduced in JUNOSe Release 7.1.0. Release Information ATM VC Class Configuration mode added in JUNOSe Release 7.3.0. In ATM VC Configuration mode, enables F5 OAM continuity check (CC) verification Description on an ATM PVC.
Page 152: Oam-Pvc
JUNOSe 11.1.x Command Reference Guide N to Z oam-pvc oam-pvc [ manage ] [ loopbackFrequency ] Syntax no oam-pvc [ manage ] Command introduced in JUNOSe Release 7.1.0. Release Information ATM VC Class Configuration mode added in JUNOSe Release 7.3.0. In ATM VC Configuration mode, enables generation of F5 OAM loopback cells on an Description ATM PVC and, optionally, enables F5 OAM VC integrity features that affect the...
Page 153: Oam Retry
Chapter 3: O Commands oam retry oam retry [ upRetryCount [ downRetryCount retryFrequency ] ] Syntax no oam retry Command introduced in JUNOSe Release 7.1.0. Release Information ATM VC Class Configuration mode added in JUNOSe Release 7.3.0. In ATM VC Configuration mode, configures parameters for F5 OAM VC integrity on Description an ATM PVC.
Page 154: Operational-Virtual-Router
JUNOSe 11.1.x Command Reference Guide N to Z operational-virtual-router operational-virtual-router vrName Syntax no operational-virtual-router Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the virtual router parameter for a user entry in the local user database. The Description subscriber is assigned to the operational virtual router only if the default virtual router performs the authentication.
Page 155: Operations-Per-Hop
Chapter 3: O Commands operations-per-hop operations-per-hop operationsHopValue Syntax no operations-per-hop Command introduced before JUNOSe Release 7.1.0. Release Information Configures the number of operations sent to a designated hop before the TTL value Description is increased. This option applies only to the pathEcho type. The no version restores the default value, 3.
Page 156: Organization
JUNOSe 11.1.x Command Reference Guide N to Z organization [ no ] organization organizationName Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the organization used in the Subject Name field of certificates. The no Description version removes the organization name. organizationName Name used in certificate requests;...
Page 157: Ospf Auto-Cost Reference-Bandwidth
Chapter 3: O Commands ospf auto-cost reference-bandwidth [ no ] ospf auto-cost reference-bandwidth refBw Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Controls how OSPF calculates default metrics for the interface. The no version assigns Description cost based only on the interface type. refBw Bandwidth in megabits per second, in the range 1–4294967;...
Page 158: Ospf Bandwidth
JUNOSe 11.1.x Command Reference Guide N to Z ospf bandwidth [ no ] ospf bandwidth Syntax Command introduced in JUNOSe Release 10.3.0. Release Information Directs the router to use the bandwidth configured on an OSPF interface for OSPF Description interface cost calculation. If you configure the bandwidth and then issue the no ospf bandwidth command, the router ignores the cost that is calculated using the configured bandwidth.
Page 159: Ospf Enable
Chapter 3: O Commands ospf enable ospf enable Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables OSPF on the router. Description NOTE: The no ospf enable command has been replaced by the ospf shutdown command and may be removed completely in a future release. Router Configuration Mode ospf enable...
Page 160: Ospf Log-Adjacency-Changes
JUNOSe 11.1.x Command Reference Guide N to Z ospf log-adjacency-changes [ no ] ospf log-adjacency-changes Syntax [ severity { severityValue | severityNumber } ] [ verbosity verbosityLevel ] Command introduced before JUNOSe Release 7.1.0. Release Information Configures the router to send a system log message when the state of an OSPFv2 Description neighbor changes.
Page 161: Ospf Shutdown
Chapter 3: O Commands ospf shutdown [ no ] ospf shutdown Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Administratively disables OSPF on the router. The no version reenables OSPF on the Description router. NOTE: This command is replacing the no ospf enable command to disable OSPF on the router.
Page 162: Overload Advertise-High-Metric Issu
JUNOSe 11.1.x Command Reference Guide N to Z overload advertise-high-metric issu [ no ] overload advertise-high-metric issu Syntax Command introduced in JUNOSe Release 9.0.0. Release Information Configures IS-IS or OSPF to advertise the maximum link cost on each interface to its Description neighbors when a unified in-service software upgrade is started, causing neighbors to route around the upgrading router.
Page 163: Overload Shutdown
Chapter 3: O Commands overload shutdown [ no ] overload shutdown Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Causes BGP to shut down when it runs out of resources. The no version restores the Description default behavior, which is to continue running. Router Configuration Mode overload shutdown...
Page 164: Override C2 Byte
JUNOSe 11.1.x Command Reference Guide N to Z override c2 byte [ no ] override c2 byte Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Overrides the default value of the Path Signal Label (C2) byte for SONET and SDH Description interfaces.
Page 165: Override-User
Chapter 3: O Commands override-user override-user [ name newName ] password newPassword Syntax no override-user Command introduced before JUNOSe Release 7.1.0. Release Information Specifies a single username and single password for all users from a domain. The Description no version removes the username and reverts to the original username. newName Identifier that replaces the username Options newPassword Password that replaces the user’s password...
Page 166: Owner
JUNOSe 11.1.x Command Reference Guide N to Z owner owner ownerValue Syntax no owner Command introduced before JUNOSe Release 7.1.0. Release Information Configures the owner of the RTR operation. The no version restores the default value. Description ownerValue Specifies the owner’s identifier: 0–255 ASCII characters; by default, Options no owner is configured RTR Configuration...
Page 167: Chapter 4 P Commands
Chapter 4 P Commands...
Page 168: Padn
JUNOSe 11.1.x Command Reference Guide N to Z padn padn ipAddress ipMask distance Syntax no padn ipAddress ipMask Command introduced before JUNOSe Release 7.1.0. Release Information Configures PADN parameters for a domain name. The no version deletes the PADN Description parameters from the domain name.
Page 169: Parent-Group
Chapter 4: P Commands parent-group In Global Configuration mode: Syntax [ no ] parent-group parentGroupName In Policy List Configuration mode: parent-group parentGroupName [ [ parent-group intParentGroupName ] | [ external parent-group extParentGroupName parameter parameterName ] ] no parent-group parentGroupName Command introduced in JUNOSe Release 7.2.0. Release Information Global Configuration mode added in JUNOSe Release 8.0.0.
Page 170: Passive-Interface
JUNOSe 11.1.x Command Reference Guide N to Z passive-interface IS-IS: Syntax passive-interface interfaceType interfaceSpecifier [ tag tagValue ] [ metric metricValue [ level-1 | level-2 ] ] no passive-interface interfaceType interfaceSpecifier [ tag ] [ metric [ level-1 | level-2 ] ] OSPF and RIP: [ no ] passive-interface interfaceType interfaceSpecifier Command introduced before JUNOSe Release 7.1.0.
Page 171: Password
Chapter 4: P Commands password Login password: Syntax password [ encryptionType ] passwordValue no password L2TP tunnel password: password tunnelPassword no password IP service profile password: password servicePassword no password Local user database password: password [ encryptionType ] passwordValue no password Command introduced before JUNOSe Release 7.1.0.
Page 172 JUNOSe 11.1.x Command Reference Guide N to Z characters, including spaces, up to 50 characters. The password checking is case sensitive. tunnelPassword Password of up to 32 characters servicePassword Password of up to 32 characters encryptionType One of the following types: 0 Unencrypted password (the default) 8 Two-way encrypted password passwordValue Character string that specifies the password.
Page 173: Path
Chapter 4: P Commands path path pathChannel [ pathSpeed [ pathHierarchy ] ] Syntax no path pathChannel Command introduced before JUNOSe Release 7.1.0. Release Information Configures paths over channelized SONET and SDH interfaces. The no version deletes Description a path. NOTE: Although the path speed appears to be optional in the software, you must specify a value.
Page 174: Path Description
JUNOSe 11.1.x Command Reference Guide N to Z path description For unchannelized SONET/SDH interfaces: Syntax [ no ] path description name For channelized SONET/SDH interfaces: [ no ] path pathChannel description name Command introduced in JUNOSe Release 7.2.0. Release Information Assigns a text description or an alias to a path on a channelized or unchannelized Description SONET/SDH interface.
Page 175: Path Ds1|E1
Chapter 4: P Commands path ds1|e1 path pathChannel { ds1 | e1 } tributaryIdentifier [ tributaryType ] Syntax [ no ] path pathChannel { ds1 | e1 } tributaryIdentifier [ tributaryType ] Command introduced before JUNOSe Release 7.1.0. Release Information Creates and configures SONET and SDH tributaries.
Page 176: Path Ds1|E1 Bert
JUNOSe 11.1.x Command Reference Guide N to Z path ds1|e1 bert path pathChannel { ds1 | e1 } tributaryIdentifier bert Syntax pattern pattern interval time [ unframed ] no path pathChannel { ds1 | e1 } tributaryIdentifier bert Command introduced before JUNOSe Release 7.1.0. Release Information Enables bit error rate tests using the specified pattern at the DS1/E1 over SONET/SDH Description...
Page 177: Path Ds1|E1 Channel-Group Description
Chapter 4: P Commands path ds1|e1 channel-group description path pathChannel { ds1 | e1 } tributaryIdentifier Syntax channel-group channelGroupNumber description name no path pathChannel { ds1 | e1 } tributaryIdentifier channel-group channelGroupNumber description Command introduced before JUNOSe Release 7.1.0. Release Information Assigns a text description or an alias to a DS1 (T1) or an E1 channel group for Description channelized SONET and SDH interfaces.
Page 178: Path Ds1|E1 Channel-Group Shutdown
JUNOSe 11.1.x Command Reference Guide N to Z path ds1|e1 channel-group shutdown [ no ] path pathChannel { ds1 | e1 } tributaryIdentifier Syntax channel-group channelGroupNumber shutdown Command introduced before JUNOSe Release 7.1.0. Release Information Disables a DS1 or an E1 channel group on channelized SONET and SDH interfaces. Description DS1 and E1 channel groups are enabled by default.
Page 179: Path Ds1|E1 Channel-Group Snmp Trap Link-Status
Chapter 4: P Commands path ds1|e1 channel-group snmp trap link-status [ no ] path pathChannel { ds1 | e1 } tributaryIdentifier Syntax channel-group channelGroupNumber snmp trap link-status Command introduced before JUNOSe Release 7.1.0. Release Information Enables SNMP link status processing on a DS1 or an E1 channel group of channelized Description SONET and SDH interfaces.
Page 180: Path Ds1|E1 Channel-Group Timeslots
JUNOSe 11.1.x Command Reference Guide N to Z path ds1|e1 channel-group timeslots path pathChannel { ds1 | e1 } tributaryIdentifier Syntax channel-group channelGroupNumber timeslots range [ speed { 56 | 64 } ] no pathChannel { ds1 | e1 } tributaryIdentifier channel-group channelGroupNumber Command introduced before JUNOSe Release 7.1.0.
Page 181: Path Ds1|E1 Clock Source
Chapter 4: P Commands path ds1|e1 clock source path pathChannel { ds1 | e1 } tributaryIdentifier clock source Syntax { line | internal { module | chassis } } no path pathChannel { ds1 | e1 } tributaryIdentifier clock source Command introduced before JUNOSe Release 7.1.0.
Page 182: Path Ds1|E1 Description
JUNOSe 11.1.x Command Reference Guide N to Z path ds1|e1 description path pathChannel { ds1 | e1 } tributaryIdentifier [ tributaryType ] description name Syntax no path pathChannel { ds1 | e1 } tributaryIdentifier [ tributaryType ] description Command introduced before JUNOSe Release 7.1.0. Release Information Assigns a text description or an alias to a DS1 or an E1 signal.
Page 183: Path Ds1|E1 Framing
Chapter 4: P Commands path ds1|e1 framing path pathChannel { ds1 | e1 } tributaryIdentifier framing framingType Syntax no path pathChannel { ds1 | e1 } tributaryIdentifier framing Command introduced before JUNOSe Release 7.1.0. Release Information Configures the framing format for a DS1 or an E1 signal when DS1/E1 is configured Description over channelized SONET and SDH interfaces.
Page 184: Path Ds1|E1 Loopback
JUNOSe 11.1.x Command Reference Guide N to Z path ds1|e1 loopback path pathChannel { ds1 | e1 } tributaryIdentifier loopback Syntax { local | network { line | payload } } no path pathChannel { ds1 | e1 } tributaryIdentifier loopback path pathChannel ds1 tributaryIdentifier loopback remote { line fdl { ansi | bellcore } | payload [ fdl ] [ ansi ] } no path pathChannel { ds1 | e1 } tributaryIdentifier loopback remote...
Page 185 Chapter 4: P Commands FDL Bellcore bit loopback on the T1 channel, according to the Bellcore TR-TSY-000312 specification. remote payload [ fdl ] [ ansi ] (T1 line only) Sends a repeating 16-bit ESF data link code word (00010100 11111111) to the remote end requesting that it enter into a network payload loopback.
Page 186: Path Ds1|E1 Shutdown
JUNOSe 11.1.x Command Reference Guide N to Z path ds1|e1 shutdown [ no ] path pathChannel { ds1 | e1 } tributaryIdentifier shutdown Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Disables DS1 or E1 over channelized SONET and SDH interfaces. DS1 and E1 Description interfaces are enabled by default.
Page 187: Path Ds1|E1 Snmp Trap Link-Status
Chapter 4: P Commands path ds1|e1 snmp trap link-status [ no ] path pathChannel { ds1 | e1 } tributaryIdentifier snmp trap link-status Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables SNMP link status processing for DS1 or E1 over channelized SONET and Description SDH interfaces.
Page 188: Path Ds1 Fdl
JUNOSe 11.1.x Command Reference Guide N to Z path ds1 fdl path pathChannel ds1 tributaryIdentifier fdl { ansi | att | all | none } Syntax no path pathChannel ds1 tributaryIdentifier fdl [ ansi | att | all ] Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the FDL standard for a DS1 signal when DS1 is configured over a channelized Description...
Page 189: Path Ds1 Fdl Carrier
Chapter 4: P Commands path ds1 fdl carrier [ no ] path pathChannel ds1 tributaryIdentifier fdl carrier Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies that a DS1 signal is used in the carrier environment. This command applies Description to a DS1 over channelized SONET or SDH interface.
Page 190: Path Ds1 Fdl String
JUNOSe 11.1.x Command Reference Guide N to Z path ds1 fdl string path pathChannel ds1 tributaryIdentifier fdl string { eic eicValue | fic ficValue | Syntax lic licValue | unit unitValue | pfi pfiValue | port portValue | generator generatorValue } no path pathChannel ds1 tributaryIdentifier fdl string { eic | fic | lic | unit | pfi | port | generator } Command introduced before JUNOSe Release 7.1.0.
Page 191: Path Ds1 Fdl Transmit
Chapter 4: P Commands path ds1 fdl transmit [ no ] path pathChannel ds1 tributaryIdentifier fdl transmit Syntax { path-id | idle-signal | test-signal } no path pathChannel ds1 tributaryIdentifier fdl transmit Command introduced before JUNOSe Release 7.1.0. Release Information Configures the router to send the specified FDL message on a DS1 signal.
Page 192: Path Ds1 Remote-Loopback
JUNOSe 11.1.x Command Reference Guide N to Z path ds1 remote-loopback [ no ] path pathChannel ds1 tributaryIdentifier remote-loopback Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables acceptance of remote loopback requests at the DS1/E1 over SONET/SDH VT Description layer on channelized SONET and SDH interfaces.
Page 193: Path Ds3
Chapter 4: P Commands path ds3 path pathChannel ds3 ds3Channel { [ channelized ] | unchannelized } Syntax no path pathChannel ds3 ds3Channel Command introduced before JUNOSe Release 7.1.0. Release Information Creates and configures a DS3 signal. This command applies to a DS3 over channelized Description SONET interface.
Page 194: Path Ds3 Bert
JUNOSe 11.1.x Command Reference Guide N to Z path ds3 bert path pathChannel ds3 ds3Channel bert pattern pattern interval time Syntax no path pathChannel ds3 ds3Channel bert Command introduced before JUNOSe Release 7.1.0. Release Information Enables bit error rate tests using the specified pattern for a DS3 signal. This command Description applies to a DS3 over channelized SONET interface.
Page 195: Path Ds3 Clock Source
Chapter 4: P Commands path ds3 clock source path pathChannel ds3 ds3Channel clock source { line | internal Syntax { module | chassis } } no path pathChannel ds3 ds3Channel clock source Command introduced before JUNOSe Release 7.1.0. Release Information Configures the transmit clock source for a DS3 signal.
Page 196: Path Ds3 Description
JUNOSe 11.1.x Command Reference Guide N to Z path ds3 description path pathChannel ds3 ds3Channel description name Syntax no path pathChannel ds3 ds3Channel description Command introduced before JUNOSe Release 7.1.0. Release Information Assigns a text description or an alias to a DS3 signal. This command applies to a DS3 Description over channelized SONET/SDH interface.
Page 197: Path Ds3 Equipment Loopback
Chapter 4: P Commands path ds3 equipment loopback path pathChannel ds3 ds3Channel equipment { customer | network } loopback Syntax no path pathChannel ds3 ds3Channel equipment Command introduced before JUNOSe Release 7.1.0. Release Information Enables or disables the router’s ability to be placed in loopback by a remote device Description connected at the DS3 layer for a DS3 signal.
Page 198: Path Ds3 Framing
JUNOSe 11.1.x Command Reference Guide N to Z path ds3 framing path pathChannel ds3 ds3Channel framing framingType Syntax no path pathChannel ds3 ds3Channel framing Command introduced before JUNOSe Release 7.1.0. Release Information Configures the framing format for a DS3 signal. This command applies to a DS3 over Description channelized SONET interface.
Page 199: Path Ds3 Loopback
Chapter 4: P Commands path ds3 loopback path pathChannel ds3 ds3Channel loopback { local | network { line | payload } } Syntax no path pathChannel ds3 ds3Channel loopback [ no ] path pathChannel ds3 ds3Channel loopback remote Command introduced before JUNOSe Release 7.1.0. Release Information Configures a loopback at the DS3 layer for a DS3 signal.
Page 200: Path Ds3 Mdl Carrier
JUNOSe 11.1.x Command Reference Guide N to Z path ds3 mdl carrier [ no ] path pathChannel ds3 ds3Channel mdl carrier Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies that a DS3 signal is used in the carrier environment. This command applies Description to a DS3 over channelized SONET interface.
Page 201: Path Ds3 Mdl String
Chapter 4: P Commands path ds3 mdl string path pathChannel ds3 ds3Channel mdl string { eic eicValue | fic ficValue | Syntax generator genValue | lic licValue | pfi pfiCode | port portValue | unit unitValue } no path pathChannel ds3 ds3Channel mdl string { eic | fic | generator | lic | pfi | port | unit } Command introduced before JUNOSe Release 7.1.0.
Page 202: Path Ds3 Mdl Transmit
JUNOSe 11.1.x Command Reference Guide N to Z path ds3 mdl transmit [ no ] path pathChannel ds3 ds3Channel mdl transmit Syntax { path-id | idle-signal | test-signal } Command introduced before JUNOSe Release 7.1.0. Release Information Enables you to transmit an MDL message on a DS3 signal. This command applies Description to a DS3 over channelized SONET interface.
Page 203: Path Ds3 Shutdown
Chapter 4: P Commands path ds3 shutdown [ no ] path pathChannel ds3 ds3Channel shutdown Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Disables a DS3 signal. This command applies to a DS3 over channelized SONET Description interface. DS3 interfaces are enabled by default. The no version restarts a disabled interface.
Page 204: Path Ds3 Snmp Trap Link-Status
JUNOSe 11.1.x Command Reference Guide N to Z path ds3 snmp trap link-status [ no ] path pathChannel ds3 ds3Channel snmp trap link-status Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables SNMP link status processing for a DS3 signal. This command applies to a Description DS3 over channelized SONET interface.
Page 205: Path Ds3 T1
Chapter 4: P Commands path ds3 t1 [ no ] path pathChannel ds3 ds3Channel t1 t1Channel Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Creates and configures a T1 channel on a DS3 signal. This command applies to a T1 Description channel on a DS3 over channelized SONET interface.
Page 206: Path Ds3 T1 Bert
JUNOSe 11.1.x Command Reference Guide N to Z path ds3 t1 bert path pathChannel ds3 ds3Channel t1 t1Channel bert Syntax pattern pattern interval time [ unframed ] no path pathChannel ds3 ds3Channel t1 t1Channel bert Command introduced before JUNOSe Release 7.1.0. Release Information Enables bit error rate tests using the specified pattern for a T1 channel on a DS3 Description...
Page 207: Path Ds3 T1 Clock Source
Chapter 4: P Commands path ds3 t1 clock source path pathChannel ds3 ds3Channel t1 t1Channel clock source Syntax { line | internal { module | chassis } } no path pathChannel ds3 ds3Channel t1 t1Channel clock source Command introduced before JUNOSe Release 7.1.0. Release Information Configures the transmit clock source for a T1 channel on a DS3 signal.
Page 208: Path Ds3 T1 Description
JUNOSe 11.1.x Command Reference Guide N to Z path ds3 t1 description path pathChannel ds3 ds3Channel t1 t1Channel [ /subchannel ] description name Syntax no path pathChannel ds3 ds3Channel t1 t1Channel [ /subchannel ] description name Command introduced before JUNOSe Release 7.1.0. Release Information Assigns a text description or an alias to a T1 channel group or subchannel on a DS3 Description...
Page 209: Path Ds3 T1 Fdl
Chapter 4: P Commands path ds3 t1 fdl path pathChannel ds3 ds3Channel t1 t1Channel fdl { ansi | att | all | none } Syntax no path pathChannel ds3 ds3Channel t1 t1Channel fdl [ ansi | att | all ] Command introduced before JUNOSe Release 7.1.0.
Page 210: Path Ds3 T1 Fdl Carrier
JUNOSe 11.1.x Command Reference Guide N to Z path ds3 t1 fdl carrier [ no ] path pathChannel ds3 ds3Channel t1 t1Channel fdl carrier Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies that a T1 channel on a DS3 signal is used in the carrier environment. This Description command applies to a T1 channel on a DS3 over channelized SONET interface.
Page 211: Path Ds3 T1 Fdl String
Chapter 4: P Commands path ds3 t1 fdl string path pathChannel ds3 ds3Channel t1 t1Channel fdl string { eic eicValue | fic ficValue Syntax | lic licValue | unit unitValue | pfi pfiValue | port portValue | generator generatorValue } no path pathChannel ds3 ds3Channel t1 t1Channel fdl string { eic | fic | lic | unit | pfi | port | generator } Command introduced before JUNOSe Release 7.1.0.
Page 212: Path Ds3 T1 Fdl Transmit
JUNOSe 11.1.x Command Reference Guide N to Z path ds3 t1 fdl transmit [ no ] path pathChannel ds3 ds3Channel t1 t1Channel fdl transmit Syntax { path-id | idle-signal | test-signal } no path pathChannel ds3 ds3Channel t1 t1Channel fdl transmit Command introduced before JUNOSe Release 7.1.0.
Page 213: Path Ds3 T1 Framing
Chapter 4: P Commands path ds3 t1 framing path pathChannel ds3 ds3Channel t1 t1Channel framing framingType Syntax no path pathChannel ds3 ds3Channel t1 t1Channel framing Command introduced before JUNOSe Release 7.1.0. Release Information Configures the framing format for a T1 channel on a DS3 signal. This command Description applies to a T1 channel on a DS3 over channelized SONET interface.
Page 214: Path Ds3 T1 Loopback
JUNOSe 11.1.x Command Reference Guide N to Z path ds3 t1 loopback path pathChannel ds3 ds3Channel t1 t1Channel loopback Syntax { local | network { line | payload } } no path pathChannel ds3 ds3Channel t1 t1Channel loopback path pathChannel ds3 ds3Channel t1 t1Channel loopback remote { line fdl { ansi | bellcore } | payload [ fdl ] [ ansi ] } no path pathChannel ds3 ds3Channel t1 t1Channel loopback remote Command introduced before JUNOSe Release 7.1.0.
Page 215 Chapter 4: P Commands Controller Configuration Mode path ds3 t1 loopback...
Page 216: Path Ds3 T1 Remote-Loopback
JUNOSe 11.1.x Command Reference Guide N to Z path ds3 t1 remote-loopback [ no ] path pathChannel ds3 ds3Channel t1 t1Channel remote-loopback Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables acceptance of remote loopback requests by a T1 channel on a DS3 signal. Description This command applies to a T1 channel on a DS3 over channelized SONET interface.
Page 217: Path Ds3 T1 Shutdown
Chapter 4: P Commands path ds3 t1 shutdown [ no ] path pathChannel ds3 ds3Channel t1 t1Channel[/subchannel ] shutdown Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Disables a T1 channel or subchannel on a DS3 signal. This command applies to a T1 Description channel or subchannel on a DS3 over channelized SONET interface.
Page 218: Path Ds3 T1 Snmp Trap Link-Status
JUNOSe 11.1.x Command Reference Guide N to Z path ds3 t1 snmp trap link-status [ no ] path pathChannel ds3 ds3Channel t1 t1Channel [ /subchannel ] Syntax snmp trap link-status Command introduced before JUNOSe Release 7.1.0. Release Information Enables SNMP link status processing for a T1 channel group or subchannel on a DS3 Description signal.
Page 219: Path Ds3 T1 Timeslots
Chapter 4: P Commands path ds3 t1 timeslots path pathChannel ds3 ds3Channel t1 t1Channel/subchannel timeslots range Syntax [ speed { 56 | 64 } ] no path pathChannel ds3 ds3Channel t1 t1Channel/subchannel Command introduced before JUNOSe Release 7.1.0. Release Information Assigns a range of DS0 timeslots to a subchannel as a single data stream for a T1 Description channel on a DS3 signal.
Page 220: Path E1 Unframed
JUNOSe 11.1.x Command Reference Guide N to Z path e1 unframed [ no ] path pathChannel e1 tributaryIdentifier unframed Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Creates and configures an unframed E1 signal on a channelized SONET or SDH Description interface.
Page 221: Path Overhead C2
Chapter 4: P Commands path overhead c2 For channelized OCx/STMx interfaces: Syntax [ no ] path pathChannel overhead c2 byteValue For unchannelized OCx/STMx interfaces: [ no ] path overhead c2 byteValue Command introduced before JUNOSe Release 7.1.0. Release Information Overrides the default value of the path signal label (C2) byte for SONET and SDH Description interfaces.
Page 222: Path Overhead J1
JUNOSe 11.1.x Command Reference Guide N to Z path overhead j1 For channelized OCx/STMx interfaces: Syntax [ no ] path pathChannel overhead j1 { msg | exp-msg } [ message ] For unchannelized OCx/STMx interfaces: [ no ] path overhead j1 { msg | exp-msg } [ message ] Command introduced before JUNOSe Release 7.1.0.
Page 223: Path Shutdown
Chapter 4: P Commands path shutdown For channelized OCx/STMx interfaces: Syntax [ no ] path pathChannel shutdown For unchannelized OCx/STMx interfaces: [ no ] path shutdown Command introduced before JUNOSe Release 7.1.0. Release Information Disables a path on channelized and unchannelized SONET/SDH interfaces. On Description channelized interfaces, you must specify the path channel number.
Page 224: Path Snmp Trap Link-Status
JUNOSe 11.1.x Command Reference Guide N to Z path snmp trap link-status For channelized OCx/STMx interfaces: Syntax [ no ] path pathChannel snmp trap link-status For unchannelized OCx/STMx interfaces: [ no ] path snmp trap link-status Command introduced before JUNOSe Release 7.1.0. Release Information Enables SNMP link-status processing for the path layer of SONET and SDH interfaces.
Page 225: Path Trigger Alarm Prdi
Chapter 4: P Commands path trigger alarm prdi For channelized OCx/STMx interfaces: Syntax [ no ] path pathChannel trigger alarm prdi For unchannelized OCx/STMx interfaces: [ no ] path trigger alarm prdi Command introduced before JUNOSe Release 7.1.0. Release Information Specifies that the router uses remote defect indications (RDIs) at the path layer to Description determine the operational state of a path.
Page 226: Path Trigger Delay
JUNOSe 11.1.x Command Reference Guide N to Z path trigger delay For channelized OCx/STMx interfaces: Syntax path pathChannel trigger delay msec delayTime no path pathChannel trigger delay For unchannelized OCx/STMx interfaces: path trigger delay msec delayTime no path trigger delay Command introduced before JUNOSe Release 7.1.0.
Page 227: Peak-Burst
Chapter 4: P Commands peak-burst peak-burst size { millisecond milliseconds } Syntax no peak-burst Command introduced before JUNOSe Release 7.1.0. Release Information milliseconds variable added in JUNOSe Release 8.1.0. Sets the peak burst for a rate-limit profile. The no version restores the default value, Description 100 ms;...
Page 228: Peak-Rate
JUNOSe 11.1.x Command Reference Guide N to Z peak-rate peak-rate { rate | parameterName percentage percentValue } Syntax no peak-rate Command introduced before JUNOSe Release 7.1.0. Release Information parameterName and percentValue variables added in JUNOSe Release 8.1.0. Sets the peak rate for a rate-limit profile. The no version restores the default value, Description rate Rate in bits per second in the range 0–4294967295 Options...
Page 229: Peer Ip Identity
Chapter 4: P Commands peer ip identity peer ip identity Syntax { address ipAddress | range ipRangeLow ipRangeHigh | subnet netAddress netMask } Command introduced in JUNOSe Release 7.3.0. Release Information Overrides the peer identity (phase 2 identity) used for IPSec security association Description negotiations.
Page 230: Pfs Group
JUNOSe 11.1.x Command Reference Guide N to Z pfs group pfs group { 1 | 2 | 5 } Syntax no pfs group Command introduced before JUNOSe Release 7.1.0. Release Information IPSec Tunnel Profile mode added in JUNOSe Release 7.3.0. Configures perfect forward secrecy for connections created with this IPSec transport Description or tunnel profile by assigning a Diffie-Hellman prime modulus group.
Page 231: Pim Disable
Chapter 4: P Commands pim disable [ no ] pim disable Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Disables PIM on a virtual router. The no version reenables PIM on a virtual router. Description Router Configuration Mode pim disable...
Page 232: Ping
JUNOSe 11.1.x Command Reference Guide N to Z ping ping [ vrf vrfName ] [ ip ] destination [ packetCount ] [ timeout timeOutVal ] Syntax [ transmit-delay delayVal ] [ ttl ttlValue ] [ data-size dataSize ] [ data-pattern { ones | zeros | random | hex-data hexData } ] [ source { interface interfaceType interfaceSpecifier | address sourceAddr } ] [ sweep-sizes sweepMin sweepMax [ sweep-interval sweepInt ] ] [ extended [ tos tosVal ] [ set-dont-fragment-bit ] [ set-router-alert ]...
Page 233 Chapter 4: P Commands source interface Specifies an interface as the source of the packets interfaceType Interface type; see Interface Types and Specifiers on page 5 interfaceSpecifier Particular interface; format varies according to interface type; see Interface Types and Specifiers on page 5 source address Specifies an IP address as the source of the packets sourceAddr IP address or domain name used as the source address sweep-sizes Configures payload sizes, enabling you to vary the sizes of the...
Page 234 JUNOSe 11.1.x Command Reference Guide N to Z interfaceType Interface type of a destination address on the router that is connected for external loopback by means of a cable or plug that loops Tx to Rx. The command succeeds only if the specified interface is connected for external loopback and the encapsulation type is ATM, Frame Relay, HDLC, or PPP.
Page 235: Ping Atm Interface Atm
Chapter 4: P Commands ping atm interface atm ping atm interface atm interfaceSpecifier vpi vci Syntax [ end-loopback | seg-loopback [ destination ] ] [ count cellCount ] [ timeout #OfSeconds ] Command introduced before JUNOSe Release 7.1.0. Release Information Sets up the ATM interface or circuit to send loopback cells.
Page 236: Ping Mpls Ip
JUNOSe 11.1.x Command Reference Guide N to Z ping mpls ip ping mpls ip [ vrf vrfName ] { targetIpAddress targetIpv4Mask | targetIpv6Prefix } Syntax [ destination startIpAddress endIpAddress increment ] [ source address sourceAddr ] [ [ repeat ] packetCount] [ ttl ttlValue ] [ timeout timeOutVal ] [ data-size dataSize | sweep-sizes sweepMin sweepMax sweepInt ] [ pad { ones | zeros | random | hex-data hexData } ]...
Page 237 Chapter 4: P Commands timeOutVal Number of seconds, in the range 1–32 to wait for an MPLS echo reply packet before the connection attempt times out dataSize Number of bytes comprising the MPLS packet, including the header, in the range 0–64000; default value is 100 bytes sweep-sizes Configures payload sizes, enabling you to vary the sizes of the echo packets being sent.
Page 238: Ping Mpls L2Transport
JUNOSe 11.1.x Command Reference Guide N to Z ping mpls l2transport ping mpls l2transport [ vrf vrfName ] Syntax { interfaceType interfaceSpecifier } [ destination startIpAddress endIpAddress increment ] [ source address sourceAddr ] [ [ repeat ] packetCount] [ ttl ttlValue ] [ timeout timeOutVal ] [ data-size dataSize | sweep-sizes sweepMin sweepMax sweepInt ] [ pad { ones | zeros | random | hex-data hexData } ] [ reply mode { ipv4-udp | ipv4-udp-with-router-alert } ]...
Page 239 Chapter 4: P Commands repeat Specifies that multiple ping packets are sent packetCount Number of packets to send to the destination address, in the range 0–4294967295; default value is 5; 0 means ping forever ttlValue Hop count specified by setting the time-to-live field in the header, in the range 1–255;...
Page 240 JUNOSe 11.1.x Command Reference Guide N to Z bottomLabelTtl Time-to-live value of the bottom label in the stack detail Displays detailed information about MPLS echo request sent and echo replies received Privileged Exec, User Exec Mode ping mpls l2transport...
Page 241: Ping Mpls L3Vpn
Chapter 4: P Commands ping mpls l3vpn ping mpls l3vpn [ vrf vrfName ] Syntax { targetAddress targetMask | targetIpv6Prefix } [ destination startIpAddress endIpAddress increment ] [ source address sourceAddr ] [ [ repeat ] packetCount ] [ ttl ttlValue ] [ timeout timeOutVal ] [ data-size dataSize | sweep-sizes sweepMin sweepMax sweepInt ] [ pad { ones | zeros | random | hex-data hexData } ] [ reply mode { ipv4-udp | ipv4-udp-with-router-alert } ]...
Page 242 JUNOSe 11.1.x Command Reference Guide N to Z packetCount Number of packets to send to the destination address, in the range 0–4294967295; default value is 5; 0 means ping forever ttlValue Hop count specified by setting the time-to-live field in the header, in the range 1–255;...
Page 243: Ping Mpls Rsvp Tunnel
Chapter 4: P Commands ping mpls rsvp tunnel ping mpls { traffic-eng | rsvp } [ vrf vrfName ] tunnel tunnelName Syntax [ destination startIpAddress endIpAddress increment ] [ source address sourceAddr ] [ [ repeat ] packetCount] [ ttl ttlValue ] [ timeout timeOutVal ] [ data-size dataSize | sweep-sizes sweepMin sweepMax sweepInt ] [ pad { ones | zeros | random | hex-data hexData } ] [ reply mode { ipv4-udp | ipv4-udp-with-router-alert } ]...
Page 244 JUNOSe 11.1.x Command Reference Guide N to Z timeOutVal Number of seconds in the range 1–32 to wait for an MPLS echo reply packet before the connection attempt times out dataSize Number of bytes comprising the MPLS packet, including the header, in the range 0–64000;...
Page 245: Ping Mpls Vpls
Chapter 4: P Commands ping mpls vpls ping mpls vpls [ vrf vrfName ] vplsName Syntax [ sender-site-id senderSiteId ] remote-site-id remoteSiteId [ destination startIpAddress endIpAddress increment [ source address sourceAddr ] [ [ repeat ] packetCount] [ ttl ttlValue ] [ timeout timeOutVal ] [ data-size dataSize | sweep-sizes sweepMin sweepMax sweepInt ] [ pad { ones | zeros | random | hex-data hexData } ] [ reply mode { ipv4-udp | ipv4-udp-with-router-alert } ]...
Page 246 JUNOSe 11.1.x Command Reference Guide N to Z packetCount Number of packets to send to the destination address, in the range 0–4294967295; default value is 5; 0 means ping forever ttlValue Hop count specified by setting the time-to-live field in the header, in the range 1–255;...
Page 247 Chapter 4: P Commands Privileged Exec, User Exec Mode ping mpls vpls...
Page 248: Policer
JUNOSe 11.1.x Command Reference Guide N to Z policer policer protocol protocolValue rate rateSize burst-size burstSize Syntax no policer protocol protocolValue Command introduced in JUNOSe Release 8.0.0. Release Information Configures token bucket policing to rate limit SRP module traffic flows. The no version Description disables policing for a specific protocol or for all protocols.
Page 249: Policy-Parameter Hierarchical
Chapter 4: P Commands policy-parameter hierarchical policy-parameter parameterName hierarchical Syntax no policy-parameter parameterName Command introduced in JUNOSe Release 8.0.0. Release Information Creates a policy parameter for a hierarchical rate limit. The no version removes the Description policy parameter and its contents. parameterName Name of policy parameter Options Global Configuration...
Page 250: Pos Description
JUNOSe 11.1.x Command Reference Guide N to Z pos description pos description name Syntax no pos description Command introduced before JUNOSe Release 7.1.0. Release Information Assigns a text description or an alias to a POS HDLC interface. Use the show interfaces Description pos command to display the text description.
Page 251: Pos Framing
Chapter 4: P Commands pos framing pos framing { sdh | sonet } Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets the type of framing for a POS interface. There is no no version. Description sdh Uses SDH framing format Options sonet Uses SONET framing format (the default) Interface Configuration...
Page 252: Pos Scramble-Atm
JUNOSe 11.1.x Command Reference Guide N to Z pos scramble-atm [ no ] pos scramble-atm Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables payload scrambling on a POS interface. When enabled, both sides of the Description connection must be using the scrambling algorithm. The router uses a 43rd-order synchronous scrambler to scramble the output data.
Page 253: Ppp Aaa-Profile
Chapter 4: P Commands ppp aaa-profile ppp aaa-profile profileName Syntax no ppp aaa-profile Command introduced before JUNOSe Release 7.1.0. Release Information Maps an AAA profile to static and dynamic, multilink and nonmultilink PPP interfaces. Description The no version removes the AAA profile assignment to the PPP interface. profileName Name of the AAA profile;...
Page 254: Ppp Authentication
JUNOSe 11.1.x Command Reference Guide N to Z ppp authentication ppp authentication [ virtual-router vrName ] { authProtocol } Syntax no ppp authentication Command introduced before JUNOSe Release 7.1.0. Release Information eap keyword added in JUNOSe Release 7.3.0. Requests authentication from a PPP peer router. The no version removes the Description authentication requirement.
Page 255: Ppp Chap-Challenge-Length
Chapter 4: P Commands ppp chap-challenge-length ppp chap-challenge-length minLength maxLength Syntax no ppp chap-challenge-length Command introduced before JUNOSe Release 7.1.0. Release Information Modifies the length of the CHAP challenge by specifying the minimum and maximum Description allowable length. The no version restores the defaults. CAUTION: Do not use the ppp chap-challenge-length command;...
Page 256: Ppp Description
JUNOSe 11.1.x Command Reference Guide N to Z ppp description ppp description name Syntax no ppp description Command introduced before JUNOSe Release 7.1.0. Release Information Assigns a text description or an alias to a static PPP interface. The no version removes Description the text description or alias.
Page 257: Ppp Dos-Protection-Group
Chapter 4: P Commands ppp dos-protection-group ppp dos-protection-group groupName Syntax no ppp dos-protection-group Command introduced in JUNOSe Release 8.1.0. Release Information Attaches a PPP denial of service (DoS) protection group to an interface. The no version Description removes the attachment of the DoS protection group from the interface. groupName Name of the DoS protection group;...
Page 258: Ppp Fragmentation
JUNOSe 11.1.x Command Reference Guide N to Z ppp fragmentation ppp fragmentation [ fragmentSize ] Syntax no ppp fragmentation Command introduced before JUNOSe Release 7.1.0. Release Information Enables fragmentation on an MLPPP link interface and optionally specifies the Description maximum fragment size, in octets, to be used on the link. The no version disables fragmentation on the link and restores the default fragment size, which is the link’s MTU.
Page 259: Ppp Hash-Link-Selection
Chapter 4: P Commands ppp hash-link-selection [ no ] ppp hash-link-selection Syntax Command introduced in JUNOSe Release 7.2.0. Release Information Enables use of a hash-based algorithm to select the link on which the router transmits Description high-priority (non-best-effort) packets, such as voice or video, on an MLPPP interface. If hash-based link selection is enabled, the router uses the IP source address and IP destination address of the packet as a hash to select the MLPPP member link on which to transmit the packet.
Page 260: Ppp Initiate-Ip
JUNOSe 11.1.x Command Reference Guide N to Z ppp initiate-ip [ no ] ppp initiate-ip Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Initiates IPv4 for passive clients. By default, PPP creates IP instances when it receives Description client requests. The no version disables initiation. Interface Configuration, Profile Configuration, Subinterface Configuration Mode ppp initiate-ip...
Page 261: Ppp Initiate-Ipv6
Chapter 4: P Commands ppp initiate-ipv6 [ no ] ppp initiate-ipv6 Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Initiates IPv6 for passive clients. By default, PPP creates IPv6 instances when it Description receives client requests. The no version disables initiation. Interface Configuration, Profile Configuration, Subinterface Configuration Mode ppp initiate-ipv6...
Page 262: Ppp Ipcp Lockout
JUNOSe 11.1.x Command Reference Guide N to Z ppp ipcp lockout [ no ] ppp ipcp lockout Syntax Command introduced in JUNOSe Release 11.0.0. Release Information Terminates invalid IPv4 subscribers and prevents additional IPCP negotiations. The Description subscriber can negotiate IPv4 addresses, IPv6 addresses, or both. When Internet Protocol version 6 Control Protocol (IPv6CP) is active, this command enables unused IPv4 addresses, which are allocated for the IPv6 subscribers, to be available for the IPCP services for an internally defined time interval (10 seconds).
Page 263: Ppp Ipcp Netmask
Chapter 4: P Commands ppp ipcp netmask [ no ] ppp ipcp netmask Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Explicitly enables the IPCP option 0x90 on a per-PPP interface basis, either in a Description profile or on a static interface. By default, the IPCP option 0x90 is disabled on the interface.
Page 264: Ppp Ipcp Prompt-Option Dns
JUNOSe 11.1.x Command Reference Guide N to Z ppp ipcp prompt-option dns [ no ] ppp ipcp prompt-option dns Syntax Command introduced in JUNOSe Release 11.0.0 Release Information Prompts the CPE (Customer Premises Equipment) to negotiate the IPCP primary and Description secondary DNS options that are locally available with the broadband remote access server...
Page 265: Ppp Keepalive
Chapter 4: P Commands ppp keepalive ppp keepalive [ seconds ] Syntax no ppp keepalive Command introduced before JUNOSe Release 7.1.0. Release Information Specifies a keepalive value. The keepalive mechanism tracks the status of the Description connection. To restore the default of 30 seconds, enter ppp keepalive without a value.
Page 266: Ppp Log
JUNOSe 11.1.x Command Reference Guide N to Z ppp log [ no ] ppp log logCategory Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables PPP packet or state machine logging on any dynamic interface that uses the Description profile being configured.
Page 267: Ppp Magic-Number Disable
Chapter 4: P Commands ppp magic-number disable [ no ] ppp magic-number disable Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Disables negotiation of the local magic number. Issuing this command prevents the Description router from detecting loopback configurations. The no version enables negotiation. Interface Configuration, Profile Configuration, Subinterface Configuration Mode ppp magic-number disable...
Page 268: Ppp Magic-Number Ignore-Mismatch
JUNOSe 11.1.x Command Reference Guide N to Z ppp magic-number ignore-mismatch [ no ] ppp magic-number ignore-mismatch Syntax Command introduced in JUNOSe Release 9.0.0. Release Information Causes the router to ignore a mismatch of the Link Control Protocol (LCP) peer magic Description number and retain the PPP connection when the peer has not negotiated an LCP magic number.
Page 269: Ppp Max-Bad-Auth
Chapter 4: P Commands ppp max-bad-auth ppp max-bad-auth maxBadAuth Syntax no ppp max-bad-auth Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the maximum number of authentication retries the router accepts before Description terminating a PPP session. The no version returns the value to the default. maxBadAuth Number of authentication retries after which the interface resets Options itself;...
Page 270: Ppp Max-Negotiations
JUNOSe 11.1.x Command Reference Guide N to Z ppp max-negotiations ppp max-negotiations [ lcp | ipcp | ipv6cp ] [ maxNegotiationsCount ] Syntax no ppp max-negotiations [ lcp | ipcp | ipv6cp ] Command introduced in JUNOSe Release 10.0.0. Release Information Configures the maximum number of LCP, IPCP, or IPv6CP renegotiation attempts Description the router accepts before terminating a PPP session.
Page 271: Ppp Mru
Chapter 4: P Commands ppp mru ppp mru mruSize Syntax no ppp mru Command introduced before JUNOSe Release 7.1.0. Release Information Sets the maximum allowable size in bytes of the maximum receive unit for PPP or Description MLPPP interfaces. If you issue the command in the context of an encapsulated PPP or MLPPP interface, it affects only that interface.
Page 272: Ppp Multilink Enable
JUNOSe 11.1.x Command Reference Guide N to Z ppp multilink enable [ no ] ppp multilink enable Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables creation of dynamic MLPPP interfaces when used in a profile. The no version Description causes the LNS to reject any incoming requests to establish dynamic MLPPP interfaces.
Page 273: Ppp Multilink Multiclass
Chapter 4: P Commands ppp multilink multiclass ppp multilink multiclass [ multilink-classes classNumber ] Syntax no ppp multilink multiclass [ multilink-classes ] Command introduced in JUNOSe Release 11.1.0. Release Information Enables multiclass MLPPP on the router, and optionally creates a specified number Description of multilink classes.
Page 274: Ppp Multilink Multiclass Fragmentation
JUNOSe 11.1.x Command Reference Guide N to Z ppp multilink multiclass fragmentation [ no ] ppp multilink multiclass fragmentation [ trafficClassName ]* Syntax Command introduced in JUNOSe Release 11.1.0. Release Information Enables fragmentation on a specified multilink class. The fragment size of each class Description is the same as that of the MLPPP link.
Page 275: Ppp Multilink Multiclass Reassembly
Chapter 4: P Commands ppp multilink multiclass reassembly [ no ] ppp multilink multiclass reassembly [ trafficClassName ]* Syntax Command introduced in JUNOSe Release 11.1.0. Release Information Enables reassembly on a specified multilink class. The maximum received Description reconstructed unit (MRRU) value of each class is the same as that of the MLPPP link. The no version disables reassembly on all multilink classes, or on the specified multilink classes if you include one or more traffic class names.
Page 276: Ppp Multilink Multiclass Traffic-Class
JUNOSe 11.1.x Command Reference Guide N to Z ppp multilink multiclass traffic-class [ no ] ppp multilink multiclass traffic-class best-effort [ trafficClassName ]* Syntax Command introduced in JUNOSe Release 11.1.0. Release Information Configures mapping of QoS traffic classes to multilink classes. The no version deletes Description the mapping of QoS traffic classes to multilink classes.
Page 277: Ppp Passive-Mode
Chapter 4: P Commands ppp passive-mode [ no ] ppp passive-mode Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Forces dynamic and static PPP interfaces into passive mode before LCP negotiation Description begins for a period of one second, enabling slow clients time to start up and to initiate LCP negotiation.
Page 278: Ppp Peer
JUNOSe 11.1.x Command Reference Guide N to Z ppp peer [ no ] ppp peer { dns | wins } Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Resolves conflicts when the router and the PPP peer router have the primary and Description secondary DNS and WINS name server addresses configured with different values.
Page 279: Ppp Reassembly
Chapter 4: P Commands ppp reassembly ppp reassembly [ mrru ] Syntax no ppp reassembly Command introduced before JUNOSe Release 7.1.0. Release Information Enables reassembly on an MLPPP link interface and optionally specifies the Description administrative MRRU value, in octets, for the link. The no version disables reassembly on the link and restores the default value, which is the link’s local MRU.
Page 280: Ppp Shutdown
JUNOSe 11.1.x Command Reference Guide N to Z ppp shutdown [ no ] ppp shutdown [ ip | ipv6 | mpls | osi ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Stops a PPP session. For MLPPP, issue only in the context of a network interface; Description the command disables the service for the MLPPP network interface (MLPPP bundle).
Page 281: Pppoe
Chapter 4: P Commands pppoe To create a PPPoE major interface in Interface Configuration mode or in Subinterface Syntax Configuration mode: [ no ] pppoe To modify the subscriber policy for PPPoE packets in Subscriber Policy Configuration mode: pppoe { permit | deny } no pppoe Command introduced before JUNOSe Release 7.1.0.
Page 282: Pppoe Acname
JUNOSe 11.1.x Command Reference Guide N to Z pppoe acName pppoe acName string Syntax no pppoe acName Command introduced before JUNOSe Release 7.1.0. Release Information Allows you to configure an access concentrator name for a PPPoE interface or profile. Description If no AC name is configured, the router name is used.
Page 283: Pppoe Always-Offer
Chapter 4: P Commands pppoe always-offer [ no ] pppoe always-offer Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets up the router to offer to set up a session, even if the router has insufficient Description resources to establish a session. The no version disables this feature, and is the default setting.
Page 284: Pppoe Auto-Configure
JUNOSe 11.1.x Command Reference Guide N to Z pppoe auto-configure pppoe auto-configure [ lockout-time { minValue maxValue | none } ] Syntax no pppoe auto-configure Command introduced before JUNOSe Release 7.1.0. Release Information lockout-time keyword, minValue variable, maxValue variable, and none keyword added in JUNOSe Release 7.2.0.
Page 285: Pppoe Clear Lockout Interface
Chapter 4: P Commands pppoe clear lockout interface pppoe clear lockout interface interfaceType interfaceSpecifier macAddress Syntax Command introduced in JUNOSe Release 7.2.0. Release Information In configurations with dynamic PPPoE subinterfaces over static PPPoE major Description interfaces, clears the lockout condition configured for the individual PPPoE client associated with the specified source media access control (MAC) address.
Page 286: Pppoe Dos-Protection-Group
JUNOSe 11.1.x Command Reference Guide N to Z pppoe dos-protection-group pppoe dos-protection-group groupName Syntax no pppoe dos-protection-group Command introduced in JUNOSe Release 8.1.0. Release Information Attaches a PPPoE denial of service (DoS) protection group to an interface. The no Description version removes the attachment of the DoS protection group from the interface.
Page 287: Pppoe Duplicate-Protection
Chapter 4: P Commands pppoe duplicate-protection [ no ] pppoe duplicate-protection Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets up the router to prevent a client from establishing more than one session using Description the same MAC address. The no version disables this feature, and is the default setting. Profile Configuration, Subinterface Configuration Mode pppoe duplicate-protection...
Page 288: Pppoe Log Pppoecontrolpacket
JUNOSe 11.1.x Command Reference Guide N to Z pppoe log pppoeControlPacket [ no ] pppoe log pppoeControlPacket Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables packet trace logging on PPPoE dynamic interfaces that are created with the Description profile being configured.
Page 289: Pppoe Max-Session-Vsa
Chapter 4: P Commands pppoe max-session-vsa pppoe max-session-vsa { override | ignore } Syntax no pppoe max-session-vsa override Command introduced in JUNOSe Release 9.3.0. Release Information Configures the PPPoE application to override the current PPPoE maximum session Description value set with the pppoe sessions command with the PPPoE maximum session value returned by the RADIUS server in the Max-Clients-Per-Interface VSA [26-143] in Access-Accept messages.
Page 290: Pppoe Motm
JUNOSe 11.1.x Command Reference Guide N to Z pppoe motm pppoe motm string Syntax no pppoe motm Command introduced before JUNOSe Release 7.1.0. Release Information Causes the PPPoE application to send a PADM message of the minute message. The Description no version disables the message.
Page 291: Pppoe Mtu
Chapter 4: P Commands pppoe mtu pppoe mtu { maximumMtu | use-lower-layer | use-mtu-tag } Syntax no pppoe mtu Command introduced in JUNOSe Release 7.1.0. Release Information Enables you to control the deployment of larger packet sizes. The no version restores Description the default behavior, which specifies a maximum MTU value.
Page 292: Pppoe Pads Disable-Ac-Info
JUNOSe 11.1.x Command Reference Guide N to Z pppoe pads disable-ac-info [ no ] pppoe pads disable-ac-info Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Prevents the router from sending the AC-Name and AC-Cookie tags in the PPPoE Description Active Discovery Session (PADS) packet.
Page 293: Pppoe Profile
Chapter 4: P Commands pppoe profile [ no ] pppoe profile [ bridgedEthernet | ip | ppp | pppoe | any ] profileName Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Assigns a profile to a static PPPoE major interface. The profile configuration is used Description to dynamically configure an upper bridged Ethernet, IP, PPP, and/or PPPoE interface.
Page 294: Pppoe Remote-Circuit-Id
JUNOSe 11.1.x Command Reference Guide N to Z pppoe remote-circuit-id [ no ] pppoe remote-circuit-id Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables a static or dynamic PPPoE interface on the router to capture and process a Description vendor-specific tag containing a remote circuit ID transmitted from a DSLAM device.
Page 295: Pppoe Service-Name-Table
Chapter 4: P Commands pppoe service-name-table pppoe service-name-table tableName Syntax no pppoe service-name-table Command introduced before JUNOSe Release 7.1.0. Release Information From Interface Configuration or Subinterface Configuration mode, assigns a PPPoE Description service name table to a PPPoE major interface for use by a static ATM or Ethernet interface.
Page 296: Pppoe-Service-Name-Table
JUNOSe 11.1.x Command Reference Guide N to Z pppoe-service-name-table [ no ] pppoe-service-name-table tableName Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Creates a PPPoE service name table and accesses PPPoE Service Name Table Description Configuration mode, which enables you to configure entries for the PPPoE service name table.
Page 297: Pppoe Sessions
Chapter 4: P Commands pppoe sessions pppoe sessions sessions Syntax no pppoe sessions Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the number of subinterfaces permitted on a PPPoE interface. The command Description affects only subinterfaces that are created after the command is entered. Previously created interfaces remain, even if their number exceeds the new value of the parameter.
Page 298: Pppoe Subinterface
JUNOSe 11.1.x Command Reference Guide N to Z pppoe subinterface [ no ] pppoe subinterface interfaceType interfaceSpecifier Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Creates a PPPoE subinterface on the specified interface. The no version removes the Description interface.
Page 299: Pppoe Url
Chapter 4: P Commands pppoe url pppoe url url Syntax no pppoe url Command introduced before JUNOSe Release 7.1.0. Release Information Causes the PPPoE application to send a string to the new client. The no version Description disables the message. The recipient of the message is determined by the mode from which the command is issued.
Page 300: Pre-Authenticate
JUNOSe 11.1.x Command Reference Guide N to Z pre-authenticate [ no ] pre-authenticate Syntax Command introduced in JUNOSe Release 8.1.0. Release Information Configures an AAA profile to support RADIUS preauthentication. During the Description preauthentication process, the router sends an Access-Request message to a RADIUS preauthentication server to obtain an AAA logical line identifier (LLID) for each subscriber.
Page 301: Preference
Chapter 4: P Commands preference preference tunnelPreference Syntax no preference Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the preference value for an L2TP tunnel. The no version restores the default Description value, 0. tunnelPreference Tunnel preference, in the range 0–2000; 0 is the highest Options preference Domain Map Tunnel Configuration, Tunnel Group Tunnel Configuration...
Page 302: Prefix
JUNOSe 11.1.x Command Reference Guide N to Z prefix prefix startIpv6Prefix { assignedPrefixLength | endIpv6Prefix } [ [ preferred | valid ] Syntax { days [ hours [ minutes [ seconds ] ] ] | infinite } ] no prefix startIpv6Prefix [ force | preferred [ valid ] | valid ] Command introduced in JUNOSe Release 10.1.0.
Page 303 Chapter 4: P Commands minutes Number of minutes for the preferred or valid lifetime; in the range 0-60. seconds Number of seconds for the preferred or valid lifetime; in the range 0-60. infinite Assigns a preferred or valid lifetime that does not expire for the delegated prefix.
Page 304: Pre-Share
JUNOSe 11.1.x Command Reference Guide N to Z pre-share pre-share key Syntax no pre-share Command introduced before JUNOSe Release 7.1.0. Release Information Configures an unencrypted (red) preshared key. The router uses this key to Description authenticate IKE negotiations that arrive from any remote IP address specified for this transport profile and that are destined for the local IP address specified.
Page 305: Pre-Share-Masked
Chapter 4: P Commands pre-share-masked pre-share-masked key Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies an encrypted (black) preshared key. The router uses this key to authenticate Description IKE negotiations that arrive from any remote IP address specified for this transport profile and that are destined for any local IP address specified for this transport profile.
Page 306: Priority Burst
JUNOSe 11.1.x Command Reference Guide N to Z priority burst priority priorityValue burst burstSize Syntax no priority priorityValue burst Command introduced in JUNOSe Release 8.1.0. Release Information Sets the burst size for each priority. The no version returns to the default value. Description priorityValue–Hi-Green-IC, Hi-Green-SC, Hi-Yellow-IC, Hi-Yellow-SC, Lo-Green-IC, Options...
Page 307: Priority Over-Subscription-Factor
Chapter 4: P Commands priority over-subscription-factor priority priorityValue over-subscription-factor oversubscriptionValue Syntax no priority priorityValue over-subscription-factor Command introduced in JUNOSe Release 8.1.0. Release Information Sets the oversubscription value for each priority rate limiter. The no version returns Description to the default value. priorityValue Hi-Green-IC, Hi-Green-SC, Hi-Yellow-IC, Hi-Yellow-SC, Lo-Green-IC, Options Lo-Green-SC, Lo-Yellow-IC, Lo-Yellow-SC...
Page 308: Priority Rate
JUNOSe 11.1.x Command Reference Guide N to Z priority rate priority priorityValue rate rateValue Syntax no priority priorityValue rate Command introduced in JUNOSe Release 8.1.0. Release Information Sets the rate for each priority. The no version returns to the default value. Description priorityValue Hi-Green-IC, Hi-Green-SC, Hi-Yellow-IC, Hi-Yellow-SC, Lo-Green-IC, Options...
Page 309: Privilege
Chapter 4: P Commands privilege privilege mode [ all ] level levelValue commandPrefix Syntax no privilege mode [ all ] [ level levelValue ] commandPrefix Command introduced before JUNOSe Release 7.1.0. Release Information Assigns a privilege level to the specified command that appears in the specified mode. Description The no version sets the privilege level for the command to its default value and displays the default privilege level in the show configuration output.
Page 310: Privilege-Group Alias
JUNOSe 11.1.x Command Reference Guide N to Z privilege-group alias [ no ] privilege-group alias Syntax Command introduced in JUNOSe Release 8.0.0. Release Information Gives the privilege group name alias to the privilege group. The no version removes Description the privilege group alias. NOTE: You must access the CLI at privilege level 15 to view or use this command.
Page 311: Privilege-Group Membership
Chapter 4: P Commands privilege-group membership privilege-group membership privilegeGroup privilegeGroupName [ add | remove ] Syntax memberGroup memberGroupName no privilege-group membership privilegeGroup Command introduced in JUNOSe Release 8.0.0. Release Information Adds a member group to or removes a member group from a privilege group. The Description no version restores one or all privilege groups to the default settings.
Page 312: Privilege-Group Membership Clear
JUNOSe 11.1.x Command Reference Guide N to Z privilege-group membership clear privilege-group membership clear privilegeGroup privilegeGroupName Syntax Command introduced in JUNOSe Release 8.0.0. Release Information Clears a privilege group or all members from a privilege group. There is no no version. Description NOTE: You must access the CLI at privilege level 15 to view or use this command.
Page 313: Privilege Level
Chapter 4: P Commands privilege level privilege level levelValue Syntax no privilege level Command introduced before JUNOSe Release 7.1.0. Release Information Sets the default login privilege level of the console line or one or more vty lines. The Description no version restores the default login privilege level for the command. NOTE: You must access the CLI at privilege level 15 to view or use this command.
Page 314: Privilege Reset
JUNOSe 11.1.x Command Reference Guide N to Z privilege reset privilege mode [ all ] reset commandPrefix Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Restores the privilege level of the command. After issuing this command, the show Description configuration output does not display the default privilege setting of the command.
Page 315: Profile
Chapter 4: P Commands profile To assign a profile name for a remote host: Syntax [ no ] profile profileName To create a profile or assign a profile to an interface: profile [ bridgedEthernet | ip | l2tp | ppp | pppoe | vlan | any ] profileName no profile [ bridgedEthernet | ip | l2tp | ppp | pppoe | vlan | any ] Command introduced before JUNOSe Release 7.1.0.
Page 316: Profile Atm1483 Bulk-Config-Name
JUNOSe 11.1.x Command Reference Guide N to Z profile atm1483 bulk-config-name profile atm1483 bulk-config-name bulkConfigName profileName Syntax no profile atm1483 bulk-config-name bulkConfigName Command introduced before JUNOSe Release 7.1.0. Release Information Assigns the base profile configured for a dynamic ATM 1483 subinterface to the VC Description range configured on a static ATM AAL5 interface with the atm bulk-config command.
Page 317: Profile Atm1483 Bulk-Config-Name Pvc
Chapter 4: P Commands profile atm1483 bulk-config-name pvc profile atm1483 bulk-config-name bulkConfigName pvc vpi vci overrideProfileName Syntax no profile atm1483 bulk-config-name bulkConfigName pvc vpi vci Command introduced before JUNOSe Release 7.1.0. Release Information Assigns an overriding profile to a single ATM PVC that exists within a VC subrange Description previously configured with the atm bulk-config command.
Page 318: Profile-Reassign
JUNOSe 11.1.x Command Reference Guide N to Z profile-reassign profile-reassign atm interfaceSpecifier { ppp | pppoe | any } profileName Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Reassigns the profile currently assigned to the specified encapsulation type for the Description specified ATM 1483 subinterface.
Page 319: Profile Vlan Bulk-Config
Chapter 4: P Commands profile vlan bulk-config profile vlan bulk-config bulkConfigName profileName Syntax no profile vlan bulk-config bulkConfigName Command introduced in JUNOSe Release 7.3.0. Release Information Assigns the base profile configured for a dynamic VLAN subinterface to the VLAN Description range configured on a static VLAN major interface with the vlan bulk-config command.
Page 320: Profile Vlan Override Bulk-Config
JUNOSe 11.1.x Command Reference Guide N to Z profile vlan override bulk-config To configure an override for a single-tagged VLAN ID: Syntax profile vlan override bulk-config bulkConfigName vlan vlanIdValue overrideProfileName To configure an override for a double-tagged S-VLAN ID: profile vlan override bulk-config bulkConfigName svlan s-vlanIdValue { vlanIdValue | any } overrideProfileName To remove the profile override assignment: no profile vlan override bulk-config bulkConfigName { svlan s-vlanId | vlan }...
Page 321: Protocol Burst
Chapter 4: P Commands protocol burst protocol protocolValue burst burstSize Syntax no protocol protocolValue burst Command introduced in JUNOSe Release 8.1.0. Release Information Sets the burst size for the protocol. The no version sets the value to the default packet Description value, which is equal to half of the configured maximum rate.
Page 322: Protocol Drop-Probability
JUNOSe 11.1.x Command Reference Guide N to Z protocol drop-probability protocol protocolValue drop-probability dropValue Syntax no protocol protocolValue drop-probability Command introduced in JUNOSe Release 8.1.0. Release Information Sets the drop probability for the protocol. The no version sets the drop probability Description value to the drop probability specified in the associated preconfigured group.
Page 323: Protocol Priority
Chapter 4: P Commands protocol priority protocol protocolValue priority priorityValue Syntax no protocol protocolValue priority Command introduced in JUNOSe Release 8.1.0. Release Information Sets the priority of the protocol. The no version sets the priority value to the priority Description value specified in the associated preconfigured group.
Page 324: Protocol Rate
JUNOSe 11.1.x Command Reference Guide N to Z protocol rate protocol protocolValue rate rateValue Syntax no protocol protocolValue rate Command introduced in JUNOSe Release 8.1.0. Release Information Sets the maximum rate for the specified protocol. The no version sets the rate to the Description value of the associated preconfigured protocol.
Page 325: Protocol Shutdown
Chapter 4: P Commands protocol shutdown [ no ] protocol shutdown Syntax Command introduced in JUNOSe Release 7.3.0. Release Information Disables the IS-IS protocol without removing the IS-IS configuration. The no version Description reenables the IS-IS protocol. Router Configuration Mode protocol shutdown...
Page 326: Protocol Skip-Priority-Rate-Limiter
JUNOSe 11.1.x Command Reference Guide N to Z protocol skip-priority-rate-limiter [ no ] protocol protocolValue skip-priority-rate-limiter Syntax Command introduced in JUNOSe Release 8.1.0. Release Information Configures the protocol to skip or not skip the priority rate limiter. The no version Description sets the value to the default, which is do not skip priority rate limiter.
Page 327: Protocol Weight
Chapter 4: P Commands protocol weight protocol protocolValue weight weightValue Syntax no protocol protocolValue weight Command introduced in JUNOSe Release 8.1.0. Release Information Sets the weight for the protocol and affects all protocols in group. The no version Description sets the weight to the value specified in the associated preconfigured group. protocolValue Name of the protocol Options weightValue Number relative to 100 in the range 100–500...
Page 328: Pvc
JUNOSe 11.1.x Command Reference Guide N to Z To create a control PVC from Interface Configuration mode: Syntax pvc vcd vpi/vci ilmi no pvc vcd To create a data PVC from Subinterface Configuration mode and access ATM VC Configuration mode: pvc vcd vpi/vci no pvc vcd Command introduced in JUNOSe Release 7.1.0.
Page 329: Chapter 5 Q Commands
Chapter 5 Q Commands...
Page 330: Qos-Adaptive-Mode
JUNOSe 11.1.x Command Reference Guide N to Z qos-adaptive-mode [ no ] qos-adaptive-mode Syntax Command introduced in JUNOSe Release 7.2.0. Release Information Enables ANCP to dynamically create QoS parameter instances associated with the Description ANCP downstream rate application. ANCP also determines the value the system uses when recalculating the QoS shaping rate.
Page 331: Qos-Interface-Parent
Chapter 5: Q Commands qos-interface-parent In QoS Interface Set Configuration mode: Syntax [ no ] qos-interface-parent interfaceSupersetName In QoS Interface Superset Configuration mode: [ no ] qos-interface-parent interface supersetInterfaceType interfaceSpecifier In Interface Configuration mode: [ no ] qos-interface-parent interfaceSetName Command introduced in JUNOSe Release 9.2.0. Release Information In QoS Interface Superset Configuration mode, assigns a parent interface for the Description...
Page 332: Qos-Interface-Set
JUNOSe 11.1.x Command Reference Guide N to Z qos-interface-set [ no ] qos-interface-set interfaceSetName Syntax Command introduced in JUNOSe Release 9.2.0. Release Information Configures a QoS interface set and enters QoS Interface Set Configuration mode. Description The no version deletes the interface set. interfaceSetName Name of the QoS interface set Options Global Configuration...
Page 333: Qos-Interface-Superset
Chapter 5: Q Commands qos-interface-superset [ no ] qos-interface-superset interfaceSupersetName Syntax Command introduced in JUNOSe Release 9.2.0. Release Information Configures a QoS interface superset and enters QoS Interface Superset Configuration Description mode. The no version deletes the interface superset. interfaceSupersetName Name of the QoS interface superset Options Global Configuration Mode...
Page 334: Qos-Mode-Port
JUNOSe 11.1.x Command Reference Guide N to Z qos-mode-port [ no ] qos-mode-port [ low-cdv | low-latency ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Configures an ATM port for per-port queuing. The no version restores the default Description integrated mode, removing per-port queuing from the ATM port;...
Page 335: Qos-Parameter
Chapter 5: Q Commands qos-parameter In Global Configuration, Interface Configuration, QoS Interface Set Configuration, Syntax and QoS Interface Superset Configuration modes: qos-parameter qosParameterInstanceName qosParameterInstanceValue no qos-parameter In Profile Configuration mode: qos-parameter qosParameterInstanceName [ qosParameterInstanceValue | add qosParameterAddValue [ initial-value qosParameterInitialValue ] ] no qos-parameter qosParameterInstanceName [ add ] Command introduced in JUNOSe Release 7.1.0.
Page 336 JUNOSe 11.1.x Command Reference Guide N to Z qosParameterAddValue Number of the rate that is added to an existing parameter instance qosParameterInitialValue Number of the initial rate of a newly created parameter instance Global Configuration, Interface Configuration, Profile Configuration, QoS Interface Mode Set Configuration, QoS Interface Superset Configuration Creating Parameter Instances...
Page 337: Qos-Parameter-Define
Chapter 5: Q Commands qos-parameter-define [ no ] qos-parameter-define qosParameterDefinitionName Syntax [ application applicationName ] [ hierarchical ] Command introduced in JUNOSe Release 7.1.0. Release Information Specifies a QoS parameter name and accesses QoS Parameter Definition mode. The Description no version deletes the QoS parameter definition. qosParameterDefinitionName Name of the parameter definition Options applicationName Name of the application that you want to associate with the...
Page 338 JUNOSe 11.1.x Command Reference Guide N to Z Configuring a Basic Parameter Definition for QoS Administrators Related Topics Configuring a Parameter Definition to Calculate Hierarchical Instances Configuring a Parameter Definition for IP Multicast Bandwidth Adjustment Configuring a Parameter Definition to Shape Ethernet Traffic Using Cell Mode Configuring a Parameter Definition to Adjust Cell Shaping Rates for ADSL Traffic Configuring a Parameter Definition to Adjust Frame Shaping Rates for VDSL Traffic...
Page 339: Qos-Port-Type-Profile
Chapter 5: Q Commands qos-port-type-profile qos-port-type-profile typeOfInterface qos-profile qosProfileName Syntax Command introduced before JUNOSe Release 7.1.0. Release Information lag keyword added in JUNOSe Release 8.1.0. Associates a QoS profile with all the ports of a given interface type. There is no no Description version.
Page 340: Qos-Profile
JUNOSe 11.1.x Command Reference Guide N to Z qos-profile [ no ] qos-profile qosProfileName Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Profile Configuration mode added in JUNOSe Release 7.2.0. QoS Interface Set Configuration and QoS Interface Superset Configuration modes added in JUNOSe Release 9.2.0.
Page 341: Qos-Shaping-Mode
Chapter 5: Q Commands qos-shaping-mode [ no ] qos-shaping-mode [ cell | frame ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies either cell-based or frame-based traffic shaping for ATM, Gigabit Ethernet, Description or 10-Gigabit Ethernet interfaces. The shaping mode is configured for a major interface and affects scheduling for all nodes and queues stacked above the interface.
Page 342: Qos-Shared-Shaper-Control
JUNOSe 11.1.x Command Reference Guide N to Z qos-shared-shaper-control [ no ] qos-shared-shaper-control Syntax Command introduced in JUNOSe Release 8.0.0. Release Information Enables the user-configurable variables in the QoS simple shared shaper algorithm Description and enters QoS Shared Shaper Control Configuration mode. The no version disables the user-configurable variables in the QoS simple shared shaper algorithm.
Page 343: Query-Interval
Chapter 5: Q Commands query-interval query-interval queryTime Syntax no query-interval Command introduced before JUNOSe Release 7.1.0. Release Information Specifies how often the router sends PIM router query messages to remote neighbors. Description The no version specifies the default time interval, 30 seconds. NOTE: This command is typically used when you configure PIM remote neighbors to run multicast services over BGP/MPLS VPNs.
Page 344: Queue
JUNOSe 11.1.x Command Reference Guide N to Z queue [ no ] { typeOfInterface | set | superset } queue traffic-class trafficClassName Syntax [ queue-profile queueProfileName [ scheduler-profile schedProfileName ] | scheduler-profile schedProfileName [ queue-profile queueProfileName ] ] [ drop-profile dropProfileName ] [ statistics-profile statisticsProfileName ] Command introduced before JUNOSe Release 7.1.0.
Page 345: Queue-Profile
Chapter 5: Q Commands queue-profile [ no ] queue-profile queueProfileName Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Configures a queue profile. The no version removes the named queue profile. Description queueProfileName Name of the queue profile Options Global Configuration Mode Configuring Queue Profiles to Manage Buffers and Thresholds Related Topics...
Page 346 JUNOSe 11.1.x Command Reference Guide N to Z queue-profile...
Page 347: Chapter 6 R Commands
Chapter 6 R Commands...
Page 348: Radius Accounting Server
JUNOSe 11.1.x Command Reference Guide N to Z radius accounting server [ no ] radius accounting server ipAddress Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the IP address of a RADIUS accounting server and puts the E Series router Description into RADIUS Configuration mode.
Page 349: Radius Acct-Session-Id-Format
Chapter 6: R Commands radius acct-session-id-format radius acct-session-id-format { decimal | description } Syntax no radius acct-session-id-format Command introduced before JUNOSe Release 7.1.0. Release Information Configures the RADIUS client’s use of a specific format for RADIUS attribute 44, Description Acct-Session-Id. The no version negates the Acct-Session-Id format. decimal Configures the RADIUS client to use a decimal format Options description Configures the RADIUS client to use the generic format:...
Page 350: Radius Algorithm
JUNOSe 11.1.x Command Reference Guide N to Z radius algorithm radius algorithm { direct | round-robin } Syntax no radius algorithm Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the algorithm that the RADIUS client uses to contact the RADIUS server. Description The no version restores the default value, direct.
Page 351: Radius Authentication Server
Chapter 6: R Commands radius authentication server [ no ] radius authentication server ipAddress Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the IP address of a RADIUS authentication server and puts the E Series Description router into RADIUS Configuration mode. The no version deletes the instance of the RADIUS server.
Page 352: Radius Calling-Station-Delimiter
JUNOSe 11.1.x Command Reference Guide N to Z radius calling-station-delimiter radius calling-station-delimiter delimiter Syntax no radius calling-station-delimiter Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the delimiter for DSL PPP users for RADIUS attribute 31, Calling-Station-Id. Description The no version removes the delimiter. delimiter Special character to set off items in the Calling-Station-Id’s definition Options (for example, # or %)
Page 353: Radius Calling-Station-Format
Chapter 6: R Commands radius calling-station-format radius calling-station-format { delimited | fixed-format [ stacked ] | Syntax fixed-format-adapter-embedded [ stacked ] | fixed-format-adapter-new-field [ stacked no radius calling-station-format Command introduced before JUNOSe Release 7.1.0. Release Information fixed-format-adapter-embedded and fixed-format-adapter-new-field keywords added in JUNOSe Release 8.1.0.
Page 354 JUNOSe 11.1.x Command Reference Guide N to Z VLAN (8 bytes) Format for serial interfaces: systemName (up to 4 bytes) slot (1 byte) adapter (1 byte) port (1 byte) 0 (8 bytes) For E120 routers and E320 routers, adapter is the number of the bay in which the I/O adapter (IOA) resides, either 0 (representing the right IOA bay on the E120 router and the upper IOA bay on the E320 router) or 1 (representing the left IOA bay on the E120 router or the lower IOA bay on...
Page 355: Radius Client
Chapter 6: R Commands radius client no radius client Syntax This command has only a no version. See the no radius client command for a Description complete description and syntax. Global Configuration Mode radius client...
Page 356: Radius Connect-Info-Format
JUNOSe 11.1.x Command Reference Guide N to Z radius connect-info-format radius connect-info-format { l2tp-connect-speed | Syntax l2tp-connect-speed-rx-when-equal } no radius connect-info-format Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the format of RADIUS attribute 77, Connect-Info, on the LNS. The format Description uses the received L2TP connect-speed AVPs that the LAC sends to the LNS.
Page 357: Radius Disconnect Client
Chapter 6: R Commands radius disconnect client [ no ] radius disconnect client ipAddress Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Configures a RADIUS disconnect client and enters RADIUS Disconnect Configuration Description mode. The no version removes the RADIUS disconnect client. NOTE: This command is deprecated and may be removed completely in a future release.
Page 358: Radius Dsl-Port-Type
JUNOSe 11.1.x Command Reference Guide N to Z radius dsl-port-type radius dsl-port-type { sdsl | adsl-cap | adsl-dmt | idsl | xdsl | virtual } Syntax no radius dsl-port-type Command introduced before JUNOSe Release 7.1.0. Release Information Sets RADIUS attribute 61, NAS-Port-Type, in RADIUS access request packets and Description accounting start and stop packets for ATM interfaces.
Page 359: Radius Dynamic-Request Server
Chapter 6: R Commands radius dynamic-request server [ no ] radius dynamic-request server ipAddress Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the IP address of a RADIUS dynamic-request server and puts the E Series Description router into RADIUS Configuration mode. The no version deletes the instance of the RADIUS server.
Page 360: Radius Ethernet-Port-Type
JUNOSe 11.1.x Command Reference Guide N to Z radius ethernet-port-type radius ethernet-port-type [ virtual | ethernet ] Syntax no radius ethernet-port-type Command introduced before JUNOSe Release 7.1.0. Release Information Indicates to RADIUS which Ethernet port type to use in RADIUS attribute 61, Description NAS-Port-Type, for all Ethernet users on the E Series router.
Page 361: Radius Icr-Partition-Accounting
Chapter 6: R Commands radius icr-partition-accounting radius icr-partition-accounting { enable | disable } Syntax no radius icr-partition-accounting Command introduced in JUNOSe Release 10.3.0. Release Information Enables or disables sending of the ICR Partition-Accounting-On or Description Partition-Accounting-Off messages to the RADIUS servers. The no version restores the default value, disable.
Page 362: Radius Ignore
JUNOSe 11.1.x Command Reference Guide N to Z radius ignore radius ignore attributeName { enable | disable } Syntax no radius ignore attributeName Command introduced before JUNOSe Release 7.1.0. Release Information pppoe-max-session keyword added in JUNOSe Release 9.3.0. Ignores the specified attribute in RADIUS Access-Accept messages. All attributes are Description disabled by default except for Framed-Ip-Netmask and Max-Clients-Per-Interface (pppoe-max-session).
Page 363: Radius Include
Chapter 6: R Commands radius include radius include attributeName Syntax { access-request | acct-on | acct-off | acct-start | acct-stop } { enable | disable } no radius include attributeName { access-request | acct-on | acct-off | acct-start | acct-stop } Command introduced before JUNOSe Release 7.1.0.
Page 364 JUNOSe 11.1.x Command Reference Guide N to Z framed-interface-id Excluded by default; includes RADIUS attribute 96, Framed-Interface-Id, if an IPv6 interface ID is assigned to the subscriber framed-ip-addr Includes RADIUS attribute 8, Framed-IP-Address, if an IP address is assigned to the subscriber framed-ipv6-prefix Excluded by default;...
Page 365 Chapter 6: R Commands l2cd-min-lp-data-rate-dn Excluded by default; includes RADIUS attribute 26-122, Min-LP-Data-Rate-Dn l2cd-max-interlv-delay-up Excluded by default; includes RADIUS attribute 26-123, Max-Interlv-Delay-Up l2cd-act-interlv-delay-up Excluded by default; includes RADIUS attribute 26-124, Act-Interlv-Delay-Up l2cd-max-interlv-delay-dn Excluded by default; includes RADIUS attribute 26-125, Max-Interlv-Delay-Dn l2cd-act-interlv-delay-dn Excluded by default;...
Page 366 JUNOSe 11.1.x Command Reference Guide N to Z Attributes available for Access-Request messages only: access-loop-parameters Includes RADIUS attribute 26-81, L2c-Information Attributes available for Acct-Start and Acct-Stop messages only: acct-link-count Includes RADIUS attribute 51, Acct-Link-Count class Includes RADIUS attribute 25, Class egress-policy-name Includes RADIUS attribute 26-11, Egress-Policy-Name framed-compression Includes RADIUS attribute 13, Framed-Compression framed-ip-netmask Includes RADIUS attribute 9, Framed-IP-Netmask...
Page 367 Chapter 6: R Commands ipv6-secondary-dns Excluded by default; includes RADIUS attribute 26-48, Ipv6-Secondary-DNS ipv6-virtual-router Excluded by default; includes RADIUS attribute 26-45, Ipv6-Virtual-Router l2tp-ppp-disconnect-cause Includes RADIUS attribute 26-51, Disconnect-Cause output-gigapkts Includes RADIUS attribute 26-36, Acct-Output-Gigapackets output-gigawords Includes RADIUS attribute 53, Acct-Output-Gigawords Attributes available for Access-Request, Acct-Start, Acct-Stop, Acct-On, and Acct-Off messages: nas-identifier Includes RADIUS attribute 32, NAS-Identifier...
Page 368: Radius Include Dsl-Forum-Attributes
JUNOSe 11.1.x Command Reference Guide N to Z radius include dsl-forum-attributes radius include dsl-forum-attributes Syntax { access-request | acct-start | acct-stop } { enable | disable } no radius include dsl-forum-attributes { access-request | acct-start | acct-stop } Command introduced in JUNOSe Release 7.3.0. Release Information Enables the inclusion of a set of DSL Forum vendor-specific attributes (VSAs) in Description...
Page 369 Chapter 6: R Commands Global Configuration Mode radius include dsl-forum-attributes...
Page 370: Radius Nas-Identifier
JUNOSe 11.1.x Command Reference Guide N to Z radius nas-identifier radius nas-identifier identifierValue Syntax no radius nas-identifier Command introduced before JUNOSe Release 7.1.0. Release Information Configures the RADIUS client’s value for RADIUS attribute 32, NAS-Identifier. The Description no version deletes the NAS-Identifier. identifierValue Number, in the range 1–64 characters;...
Page 371: Radius Nas-Port-Format
Chapter 6: R Commands radius nas-port-format radius nas-port-format { 0ssssppp | ssss0ppp } Syntax no radius nas-port-format Command introduced before JUNOSe Release 7.1.0. Release Information Configures the RADIUS client’s use of a specific format for RADIUS attribute 5, Description NAS-Port. The no version removes the format. 0ssssppp Sets the RADIUS client to use the 0ssssppp format where s is slot and Options p is port...
Page 372: Radius Nas-Port-Format Extended
JUNOSe 11.1.x Command Reference Guide N to Z radius nas-port-format extended For ATM interfaces: Syntax radius nas-port-format extended atm [ field-widths [ slot slotWidth ] [ adapter adapterWidth ] [ port portWidth ] [ vpi vpiWidth ] [ vci vciWidth ] ] no radius nas-port-format extended atm For Gigabit and 10-Gigabit Ethernet interfaces: radius nas-port-format extended ethernet [ field-widths [ slot slotWidth ]...
Page 373: Radius Override Calling-Station-Id Remote-Circuit-Id
Chapter 6: R Commands radius override calling-station-id remote-circuit-id radius override calling-station-id remote-circuit-id Syntax no radius override calling-station-id Command introduced before JUNOSe Release 7.1.0. Release Information Configures RADIUS to override the standard use of the Calling-Station-Id [31] RADIUS Description attribute and instead use the PPPoE remote circuit ID transmitted from a DSLAM device.
Page 374: Radius Override Nas-Info
JUNOSe 11.1.x Command Reference Guide N to Z radius override nas-info [ no ] radius override nas-info Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Configures the RADIUS client for a virtual router context to override the standard Description use of the NAS-IP-Address [4] and NAS-Identifier [32] attributes when the client performs AAA broadcast accounting.
Page 375: Radius Override Nas-Ip-Addr Tunnel-Client-Endpoint
Chapter 6: R Commands radius override nas-ip-addr tunnel-client-endpoint radius override nas-ip-addr tunnel-client-endpoint Syntax no radius override nas-ip-addr Command introduced before JUNOSe Release 7.1.0. Release Information Configures the RADIUS client (LNS) to override the standard use of the NAS-IP-Address Description [4] RADIUS attribute and instead use the tunnel-client-endpoint (LAC) IP address. The no version restores the default address.
Page 376: Radius Override Nas-Port-Id Remote-Circuit-Id
JUNOSe 11.1.x Command Reference Guide N to Z radius override nas-port-id remote-circuit-id radius override nas-port-id remote-circuit-id Syntax no radius override nas-port-id Command introduced before JUNOSe Release 7.1.0. Release Information Configures RADIUS to override the standard use of the NAS-Port-Id [87] RADIUS Description attribute and instead use the PPPoE remote circuit ID transmitted from a DSLAM device.
Page 377: Radius Pppoe Nas-Port-Format Unique
Chapter 6: R Commands radius pppoe nas-port-format unique [ no ] radius pppoe nas-port-format unique Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Allows the E Series RADIUS client to use a unique value for the NAS-Port attribute Description for subscribers on PPPoE interfaces.
Page 378: Radius Pre-Authentication Server
JUNOSe 11.1.x Command Reference Guide N to Z radius pre-authentication server [ no ] radius pre-authentication server ipAddress Syntax Command introduced in JUNOSe Release 8.1.0. Release Information Specifies the IP address of a RADIUS preauthentication server and accesses RADIUS Description Configuration mode.
Page 379: Radius Relay Server
Chapter 6: R Commands radius relay server radius relay { authentication | accounting } server Syntax no radius relay [ { authentication | accounting } server ] Command introduced before JUNOSe Release 7.1.0. Release Information Configures a RADIUS relay authentication or accounting server, and enters RADIUS Description Relay Configuration mode.
Page 380: Radius Relay Udp-Checksum
JUNOSe 11.1.x Command Reference Guide N to Z radius relay udp-checksum radius relay udp-checksum { enable | disable } Syntax no radius relay udp-checksum Command introduced before JUNOSe Release 7.1.0. Release Information Enables or disables UDP checksum for RADIUS relay packets on virtual routers that Description you configure for B-RAS.
Page 381: Radius Remote-Circuit-Id-Delimiter
Chapter 6: R Commands radius remote-circuit-id-delimiter radius remote-circuit-id-delimiter delimiter Syntax no radius remote-circuit-id-delimiter Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the delimiter character that sets off components in the PPPoE remote circuit Description ID value sent from a DSLAM and captured on the router. The no version restores the default delimiter character, #.
Page 382: Radius Remote-Circuit-Id-Format
JUNOSe 11.1.x Command Reference Guide N to Z radius remote-circuit-id-format radius remote-circuit-id-format { [ nas-identifier ] { agent-circuit-id | agent-remote-id Syntax | agent-circuit-id agent-remote-id } | dsl-forum-1 } no radius remote-circuit-id format Command introduced before JUNOSe Release 7.1.0. Release Information dsl-forum-1 keyword added in JUNOSe Release 7.2.0.
Page 383: Radius Rollover-On-Reject
Chapter 6: R Commands radius rollover-on-reject radius rollover-on-reject { enable | disable } Syntax no radius rollover-on-reject Command introduced before JUNOSe Release 7.1.0. Release Information On a virtual router, specifies whether the router should roll over to the next RADIUS Description server when the router receives an access-reject message for the user it is authenticating.
Page 384: Radius Route-Download Server
JUNOSe 11.1.x Command Reference Guide N to Z radius route-download server [ no ] radius route-download server ipAddress Syntax Command introduced in JUNOSe Release 8.1.0. Release Information Specifies the IP address of a RADIUS server that downloads routes and puts the E Description Series router into RADIUS Configuration mode.
Page 385: Radius Trap Acct-Server-Not-Responding
Chapter 6: R Commands radius trap acct-server-not-responding radius trap acct-server-not-responding { enable | disable } Syntax no radius trap acct-server-not-responding Command introduced before JUNOSe Release 7.1.0. Release Information Enables or disables SNMP traps when a RADIUS accounting server fails to respond Description to a RADIUS accounting request.
Page 386: Radius Trap Acct-Server-Responding
JUNOSe 11.1.x Command Reference Guide N to Z radius trap acct-server-responding radius trap acct-server-responding { enable | disable } Syntax no radius trap acct-server-responding Command introduced before JUNOSe Release 7.1.0. Release Information Enables or disables SNMP traps when a RADIUS accounting server returns to service Description after being marked as unavailable.
Page 387: Radius Trap Auth-Server-Not-Responding
Chapter 6: R Commands radius trap auth-server-not-responding radius trap auth-server-not-responding { enable | disable } Syntax no radius trap auth-server-not-responding Command introduced before JUNOSe Release 7.1.0. Release Information Enables or disables SNMP traps when a RADIUS authentication server fails to respond Description to a RADIUS Access-Request message.
Page 388: Radius Trap Auth-Server-Responding
JUNOSe 11.1.x Command Reference Guide N to Z radius trap auth-server-responding radius trap auth-server-responding { enable | disable } Syntax no radius trap auth-server-responding Command introduced before JUNOSe Release 7.1.0. Release Information Enables or disables SNMP traps when a RADIUS authentication server returns to Description service after being marked as unavailable.
Page 389: Radius Trap No-Acct-Server-Responding
Chapter 6: R Commands radius trap no-acct-server-responding radius trap no-acct-server-responding { enable | disable } Syntax no radius trap no-acct-server-responding Command introduced before JUNOSe Release 7.1.0. Release Information Enables or disables SNMP traps when all the configured RADIUS accounting servers Description per VR fail to respond to a RADIUS accounting request.
Page 390: Radius Trap No-Auth-Server-Responding
JUNOSe 11.1.x Command Reference Guide N to Z radius trap no-auth-server-responding radius trap no-auth-server-responding { enable | disable } Syntax no radius trap no-auth-server-responding Command introduced before JUNOSe Release 7.1.0. Release Information Enables or disables SNMP traps when all the configured RADIUS authentication Description servers per VR fail to respond to a RADIUS Access-Request message.
Page 391: Radius Tunnel-Accounting
Chapter 6: R Commands radius tunnel-accounting radius tunnel-accounting { enable | disable } Syntax no radius tunnel-accounting Command introduced before JUNOSe Release 7.1.0. Release Information Enables or disables tunnel accounting. The no version restores the default value, Description disable. enable Specifies the feature Options disable Disables the feature;...
Page 392: Radius Udp-Checksum
JUNOSe 11.1.x Command Reference Guide N to Z radius udp-checksum radius udp-checksum { enable | disable } Syntax no radius udp-checksum Command introduced before JUNOSe Release 7.1.0. Release Information Enables or disables UDP checksum for RADIUS packets on virtual routers that you Description configure for B-RAS.
Page 393: Radius Update-Source-Addr
Chapter 6: R Commands radius update-source-addr radius update-source-addr sourceAddr Syntax no radius update-source-addr Command introduced before JUNOSe Release 7.1.0. Release Information Specifies an alternate source IP address for the router to use rather than the default Description router ID. The no version deletes the alternate address, and the router uses the router sourceAddr Source address of the RADIUS client Options Global Configuration...
Page 394: Radius Vlan Nas-Port-Format Stacked
JUNOSe 11.1.x Command Reference Guide N to Z radius vlan nas-port-format stacked radius vlan nas-port-format stacked Syntax no radius vlan nas-port-format Command introduced before JUNOSe Release 7.1.0. Release Information Configures the RADIUS NAS-Port attribute to include the S-VLAN ID, in addition to Description the VLAN ID, for subscribers on Ethernet interfaces.
Page 395: Range
Chapter 6: R Commands range range minimumParameterValue maximumParameterValue Syntax no range Command introduced in JUNOSe Release 7.1.0. Release Information Assigns a range of minimum and maximum values to a specific QoS parameter Description definition. QoS clients can specify only values within this range when creating QoS parameter instances.
Page 396: Rate-Limit-Profile
JUNOSe 11.1.x Command Reference Guide N to Z rate-limit-profile To create or modify a rate-limit profile: Syntax [ no ] profileType rate-limit-profile profileName [ rateLimitType ] To specify a rate-limit profile in a policy in classifier-group mode: [ no ] [ suspend ] rate-limit-profile profileName To create a hierarchical rate-limit profile: [ no ] rate-limit-profile profileName [ two-rate | one-rate ] hierarchical To specify a rate-limit for an external parent group:...
Page 397 Chapter 6: R Commands Policy Rule Precedence Related Topics Creating a One-Rate Rate-Limit Profile Creating a Two-Rate Rate-Limit Profile rate-limit-profile...
Page 398: Rate-Period
JUNOSe 11.1.x Command Reference Guide N to Z rate-period rate-period ratePeriod Syntax no rate-period Command introduced before JUNOSe Release 7.1.0. Release Information Configures the length of time during which statistics are logged. The no version Description deletes the rate period and results in no statistics being gathered. ratePeriod Number of seconds in the range 1–43200 Options Statistics Profile Configuration...
Page 399 Chapter 6: R Commands rd distinguisher Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the unique two-part route distinguisher for a VRF. There is no no version. Description distinguisher Unique two-part identifier in the format number1:number2 Options number1 AS number or an IP address number2 Unique integer;...
Page 400: Reaction-Factor
JUNOSe 11.1.x Command Reference Guide N to Z reaction-factor reaction-factor reactionFactor Syntax no reaction-factor Command introduced in JUNOSe Release 8.0.0. Release Information Specifies the reaction factor for all simple shared shapers on the router. The reaction Description factor determines how the shared shaper reacts to changes in the measured rate. The no version removes the specified reaction factor from all simple shared shapers on the router.
Page 401: Receive-Interface
Chapter 6: R Commands receive-interface receive-interface interfaceType interfaceSpecifier Syntax no receive-interface Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the interface on which the RTR probe expects to receive responses. You Description must set this attribute when multiple RTR entries are configured to use the same target address.
Page 402: Receive Version
JUNOSe 11.1.x Command Reference Guide N to Z receive version [ no ] receive version [ 1 ] [ 2 ] [ off ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Restricts the RIP version that the router can receive on a RIP remote-neighbor Description interface.
Page 403: Receive-Window
Chapter 6: R Commands receive-window receive-window receiveWindowSize Syntax no receive-window Command introduced before JUNOSe Release 7.1.0. Release Information Configures the L2TP receive window size (RWS) for a tunnel on the LAC (in Domain Description Map Tunnel Configuration and Tunnel Group Tunnel Configuration modes) or on the LNS (in L2TP Destination Profile Host Configuration mode).
Page 404: Redistribute
JUNOSe 11.1.x Command Reference Guide N to Z redistribute The options available vary depending on the routing protocol context; that is, on Syntax whether you are configuring BGP, DVMRP, IS-IS, OSPF, or RIP. For BGP: redistribute { fromProtocol | [ ospf match internal [ external [ 1 | 2 ] ] | ospf match external [ 1 | 2 ] [ internal ] ] } [ metric absoluteValue | route-map mapTag | weight wtValue ]* no redistribute { fromProtocol | [ ospf match internal [ external [ 1 | 2 ] ] |...
Page 405 Chapter 6: R Commands redistribute { fromProtocol | ospf match internal } | metric-type { 1 | 2 } [ metric absoluteValue | tag tagValue | route-map mapTag ]* no redistribute { fromProtocol | ospf match internal } | metric-type [ 1 | 2 ] [ metric [ absoluteValue ] | tag [ tagValue ] | route-map [ mapTag ] ]* [ no ] redistribute ospf { match internal external [ 1 | 2 ] | match external [ 1 | 2 ] [ internal ] }...
Page 406 JUNOSe 11.1.x Command Reference Guide N to Z rip Routes sourced from RIP static Redistributes static routes static ip Redistributes static routes for IS-IS ospf match Determines what type(s) of routes to redistribute from OSPF; all OSPF routes are redistributed if you do not specify a type internal Redistributes OSPF internal routes external 1 Redistributes OSPF external routes of metric-type 1 external 2 Redistributes OSPF external routes of metric-type 2...
Page 407: Redistribute Isis
Chapter 6: R Commands redistribute isis [ no] redistribute isis from { level-1 into level-2 | level-2 into level-1 } Syntax route-map mapTag Command introduced in JUNOSe Release 8.2.0. Release Information Redistributes IPv6 routes from one IS-IS routing level into the other. The no version Description ends the redistribution.
Page 408: Redistribute Isis Ip
JUNOSe 11.1.x Command Reference Guide N to Z redistribute isis ip [ no ] redistribute isis ip { level-1 into level-2 | level-2 into level-1 } Syntax { distribute-list accessListName | route-map mapTag } Command introduced before JUNOSe Release 7.1.0. Release Information Redistributes routes from one IS-IS routing level into the other.
Page 409: Red-Mark
Chapter 6: R Commands red-mark [ no ] red-mark colorMarkValue Syntax Command introduced in JUNOSe Release 7.2.0. Release Information Applies ToS mark value to red packets, which can be from policy actions, earlier Description policies, or rate-limit hierarchies. The no version deletes the ToS mark value. colorMarkValue Value of the ToS mark to be applied, in the range 0–255 Options Color Mark Profile Configuration...
Page 410: Redundancy
JUNOSe 11.1.x Command Reference Guide N to Z redundancy redundancy Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables redundancy configuration mode. There is no no version. Description Global Configuration Mode redundancy...
Page 411: Redundancy Force-Switchover
Chapter 6: R Commands redundancy force-switchover redundancy force-switchover { slotNumber | srp } Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Forces the router to switch from the primary line module in the specified slot or the Description primary SRP module to the spare line module or SRP module. This command overrides the redundancy lockout command.
Page 412: Redundancy Lockout
JUNOSe 11.1.x Command Reference Guide N to Z redundancy lockout [ no ] redundancy lockout slotNumber Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Prevents the router from switching automatically to a spare line module if the primary Description module fails on a slot.
Page 413: Redundancy Revert
Chapter 6: R Commands redundancy revert [ no ] redundancy revert slotNumber Syntax [ startTime [ [ startMonth startDay | startDay startMonth ] startYear ] ] Command introduced before JUNOSe Release 7.1.0. Release Information Forces the router to revert to the primary line module in the specified slot. If you Description specify a time or time and date, reversion occurs when the primary line module becomes available after that time.
Page 414: Redundancy Revertive
JUNOSe 11.1.x Command Reference Guide N to Z redundancy revertive [ no ] redundancy revertive [ timeOfDay ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables the router to revert from spare line modules to available primary line modules Description automatically.
Page 415: Redundant-Port
Chapter 6: R Commands redundant-port To specify a member interface with optional failover timeout and packet sampling Syntax settings: [ no ] redundant-port interfaceType interfaceSpecifier [ [ failover timeout failoverTime ] [ packet-sampling [ delay delayTime ] ] ] To specify a member interface with optional auto-reversion, transmitter, and failover timeout settings: [ no ] redundant-port interfaceType interfaceSpecifier [ [ auto-revert ] [ transmitter { on | off } ] [ failover timeout failoverTime ] ]...
Page 416: Redundant-Port Force-Failover
JUNOSe 11.1.x Command Reference Guide N to Z redundant-port force-failover redundant-port interfaceType interfaceSpecifier [ force-failover ] Syntax Command introduced in JUNOSe Release 8.0.0. Release Information Specifies a member link of a LAG bundle to fail over when more than one active Description member link exists.
Page 417: Reference-Bandwidth
Chapter 6: R Commands reference-bandwidth reference-bandwidth Syntax refBandwidth no reference-bandwidth Command introduced in JUNOSe Release 8.0.0. Release Information Configures a reference bandwidth on which the default routing metric for an IS-IS Description interface is based in the absence of a configured metric. The default metric is calculated as the reference bandwidth divided by the interface’s bandwidth.
Page 418: Reference-Rate
JUNOSe 11.1.x Command Reference Guide N to Z reference-rate reference-rate refRate Syntax no reference-rate Command introduced in JUNOSe Release 8.1.0. Release Information Specifies the reference rate for the policy parameter. The no version sets the reference Description rate to the default value. refRate Value of reference rate, in the range 0–4294967295, default value is Options 65536...
Page 419: Refresh-Period
Chapter 6: R Commands refresh-period refresh-period period Syntax no refresh-period Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the timeout period in milliseconds between generation of RSVP refresh Description messages. The no version restores the default value, 30000 milliseconds. period Interval from 0–4294967295 Options RSVP Profile Configuration...
Page 420: Relearn
JUNOSe 11.1.x Command Reference Guide N to Z relearn relearn { permit | deny } Syntax no relearn Command introduced before JUNOSe Release 7.1.0. Release Information Modifies the relearning subscriber policy for the subscriber (client) interfaces that Description belong to a bridge group or to a VPLS instance. A bridge group or a VPLS instance learns the addresses of network nodes by examining the MAC source address of every incoming packet and creating an entry in the forwarding table that consists of the address and associated interface where the packet was received.
Page 421: Reload
Chapter 6: R Commands reload reload [ reason | force [ reason ] | in inTime [ reason ] | Syntax at atTime [ month day | day month ] [ reason ] | cancel | standby-srp ] Command introduced before JUNOSe Release 7.1.0. Release Information Reloads the operating system in the designated interval or at the designated time.
Page 422: Reload Slot
JUNOSe 11.1.x Command Reference Guide N to Z reload slot reload slot slotNumber [ subsystem ] [ force ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Reboot the module in the selected slot. You can reboot the subsystems on the SRP Description modules on the E120 router or the E320 router separately.
Page 423: Remote Host
Chapter 6: R Commands remote host remote host { hostname | default } Syntax no remote host { hostname | default } Command introduced before JUNOSe Release 7.1.0. Release Information Defines an L2TP host profile. Accesses the L2TP Destination Profile Host Configuration Description mode.
Page 424: Remote-Neighbor
JUNOSe 11.1.x Command Reference Guide N to Z remote-neighbor For OSPF: Syntax [ no ] remote-neighbor ipAddress area { areaId | areaIdInt } For PIM: [ no ] remote-neighbor [ ipAddress | ipv6Address ] sparse-mode For RIP: [ no ] remote-neighbor ipAddress Command introduced before JUNOSe Release 7.1.0.
Page 425: Rename
Chapter 6: R Commands rename rename [ sourcePath]sourceFilename [ destinationPath]destinationFilename Syntax Command introduced before JUNOSe Release 7.1.0. Release Information hostName and deviceName variables added in JUNOSe Release 7.2.0. Renames a local file. There is no no version. Description NOTE: You cannot change the extension of a file, for example, from .mac to .scr. See Renaming Files in the JUNOSe System Basics Configuration Guide for detailed information on file type usage with the rename command.
Page 426 JUNOSe 11.1.x Command Reference Guide N to Z subdirectory Name of a subdirectory on the router’s FTP server. If the subdirectory does not exist, the router creates it. outgoing Specifies the router’s outgoing FTP directory destinationFileName New filename Privileged Exec Mode rename...
Page 427: Request-Data-Size
Chapter 6: R Commands request-data-size request-data-size requestSizeValue Syntax no request-data-size Command introduced before JUNOSe Release 7.1.0. Release Information Sets the request payload data size. The no version restores the default value. Description requestSizeValue Size of the data in bytes in the request packet’s payload; default Options value is 1 byte RTR Configuration...
Page 428: Reserve
JUNOSe 11.1.x Command Reference Guide N to Z reserve reserve ipAddress macAddress Syntax no reserve ipAddress Command introduced before JUNOSe Release 7.1.0. Release Information For DHCP local server clients, reserves an IP address for a specific MAC address. The Description no version removes the reservation.
Page 429: Resource
Chapter 6: R Commands resource resource resourceValue Syntax no resource Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the total number of triggers that the virtual router allows. The no version Description returns the resource level to its default (50). resourceValue Total number of triggers , in the range 1–1000, that the virtual Options router allows.
Page 430: Resource If-Type
JUNOSe 11.1.x Command Reference Guide N to Z resource if-type [ no ] resource if-type { atm-active-sub-if | atm-sub-if | atm-vc | ip | ppp-link } Syntax { slot slot | system } threshold { falling fallingValue | hold-down-time holdDownTime | rising risingValue } Command introduced before JUNOSe Release 7.1.0.
Page 431: Resource Threshold
Chapter 6: R Commands resource threshold [ no ] resource threshold disable traps Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Disables the issuance of traps when the resource reaches a preset threshold. The no Description version reenables traps for resource threshold conditions. Global Configuration Mode resource threshold...
Page 432: Restricted
JUNOSe 11.1.x Command Reference Guide N to Z restricted [ no ] restricted interface restrictedInterfaceType interfaceSpecifier [ atmVpi | Syntax s-vlanIdValue ] Command introduced in JUNOSe Release 9.2.0. Release Information Configures an interface superset as restricted to a particular ATM-VPI or S-VLAN ID. Description The no version deletes the restriction for the interface superset.
Page 433: Retransmit
Chapter 6: R Commands retransmit retransmit retries Syntax no retransmit Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the maximum number of times a router retransmits a RADIUS packet to Description an authentication or accounting server. The no version restores the default value. retries Number of retries, in the range 0–100;...
Page 434: Retransmit-Interval
JUNOSe 11.1.x Command Reference Guide N to Z retransmit-interval retransmit-interval retransInterval Syntax no retransmit-interval Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the time between LSA retransmissions for the OSPF remote-neighbor Description interface when an acknowledgment for the LSA is not received. The no version restores the default value.
Page 435: Rib-Out Disable
Chapter 6: R Commands rib-out disable [ no | default ] rib-out disable Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Disables storage of routes to the Adj-RIBs-Out tables (disables rib-out) for all BGP Description peers. Storage is disabled by default. The no version enables the route storage. The default version removes the explicit global configuration for all peers and reestablishes inheritance of the feature configuration.
Page 436: Root Proxy Url
JUNOSe 11.1.x Command Reference Guide N to Z root proxy url root proxy url name Syntax no root proxy url Command introduced before JUNOSe Release 7.1.0. Release Information Specifies your network’s HTTP proxy server, which can submit HTTP requests on Description the E Series router’s behalf to retrieve the root CA certificate during online digital certificate configuration.
Page 437: Route Interface
Chapter 6: R Commands route interface route interface tunnel lspName [ vc-id ] vcidValue [ groupID groupIdValue ] Syntax [ control-word | no-control-word ] [ sequencing | no-sequencing ] [ relay-format { ethernet | frame-relay | ppp | vlan | ethernet-raw-mode} ] no route interface Command introduced before JUNOSe Release 7.1.0.
Page 438 JUNOSe 11.1.x Command Reference Guide N to Z PE router. The default preference is determined by the interface stack on which the MPLS interface is stacked. sequencing Specifies that the local preference is to include nonzero sequence numbers with the control word, enabling the remote PE to detect out-of-order packets;...
Page 439 Chapter 6: R Commands NOTE: The relay-format keyword determines the pseudowire PW Type value that is used in LDP protocol messages. For a complete list of pseudowire Type values, see http://www.iana.org/assignments/pwe3-parameters. If you do not specify the relay-format keyword in the mpls-relay or route interface command, the pseudowire Type value is chosen based on the type of the interface.
Page 440: Route-Map
JUNOSe 11.1.x Command Reference Guide N to Z route-map Specifying a route map for DVMRP or RIP: Syntax [ no ] route-map mapTag [ interfaceType interfaceSpecifier ] Defining a route map: [ no ] route-map mapTag [ permit | deny ] [ sequence ] Defining a route map for data MDTs: route-map routeMapName no route-map...
Page 441: Route-Target
Chapter 6: R Commands route-target [ no ] route-target { import | export | both } extendedCommunity Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Creates or adds to a list of VPN extended communities used to determine which Description routes are imported by a VRF.
Page 442: Router Bgp
JUNOSe 11.1.x Command Reference Guide N to Z router bgp [ no ] router bgp autonomousSystem Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Configures the BGP routing process. Allows you to set up a distributed routing core Description that automatically guarantees the loop-free exchange of routing information between ASs.
Page 443: Router Dvmrp
Chapter 6: R Commands router dvmrp [ no ] router dvmrp Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Creates and enables DVMRP on a virtual router; accesses DVMRP router configuration Description mode. The no version deletes DVMRP from a virtual router. Global Configuration Mode router dvmrp...
Page 444: Router-Id
JUNOSe 11.1.x Command Reference Guide N to Z router-id [ no ] router-id ipAddress Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies an IP address that the router uses as a router ID for OSPF. The no version Description forces OSPF to use the previous OSPF router ID.
Page 445: Router Igmp
Chapter 6: R Commands router igmp [ no ] router igmp Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Creates and enables IGMP on a virtual router; accesses IGMP router configuration Description mode. The no version disables IGMP on a virtual router. Global Configuration Mode router igmp...
Page 446: Router Isis
JUNOSe 11.1.x Command Reference Guide N to Z router isis [ no ] router isis [ tag ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables the IS-IS routing protocol and specifies an IS-IS process for IP. The no version Description disables IS-IS routing.
Page 447: Router Mld
Chapter 6: R Commands router mld [ no ] router mld Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Creates and enables MLD on a virtual router; accesses MLD router configuration Description mode. The no version disables MLD on a virtual router. NOTE: This command is identical to the ipv6 router mld command.
Page 448: Router-Name
JUNOSe 11.1.x Command Reference Guide N to Z router-name router-name vrName Syntax no router-name [ vrName ] Command introduced before JUNOSe Release 7.1.0. Release Information Maps a virtual router to a user domain name. The no version deletes the router name Description parameter, and the router defaults to the default virtual router.
Page 449: Router Ospf
Chapter 6: R Commands router ospf [ no ] router ospf processId [ vrf vrfName ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Configures an OSPF routing process. The no version disables an OSPF routing process. Description processId Number, in the range 1–65535, that identifies the OSPF process Options vrfName Name of the VRF;...
Page 450: Router Pim
JUNOSe 11.1.x Command Reference Guide N to Z router pim [ no ] router pim Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Creates and enables PIM on a virtual router; accesses PIM router configuration mode. Description The no version deletes PIM from a virtual router. Global Configuration Mode router pim...
Page 451: Router Rip
Chapter 6: R Commands router rip [ no ] router rip Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables RIP routing protocol configuration. The no version deletes the RIP process Description and removes the configuration from the router. Global Configuration Mode router rip...
Page 452: Rtr
JUNOSe 11.1.x Command Reference Guide N to Z [ no ] rtr rtrIndex Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets the number of the RTR operation to be configured and accesses the RTR Description Configuration mode. The no version removes all configuration information for a specified RTR operation.
Page 453: Rtr Reaction-Configuration
Chapter 6: R Commands rtr reaction-configuration no rtr reaction-configuration rtrIndex Syntax This command has only a no version. See the no rtr reaction-configuration command Description for a complete description and syntax. Global Configuration Mode rtr reaction-configuration...
Page 454: Rtr Reaction-Configuration Action-Type
JUNOSe 11.1.x Command Reference Guide N to Z rtr reaction-configuration action-type rtr reaction-configuration rtrIndex [ action-type actionType ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets certain actions to occur based on events under control of the RTR. The default Description is that traps of enabled events are taken.
Page 455: Rtr Reaction-Configuration Operation-Failure
Chapter 6: R Commands rtr reaction-configuration operation-failure rtr reaction-configuration rtrIndex operation-failure [ operationFailureValue ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables operation-failure reaction. When the type of RTR entry is echo, you can also Description configure a value that triggers the operation-failure trap. When the type of RTR entry is pathEcho, you cannot configure the operation-failure trap.
Page 456: Rtr Reaction-Configuration Path-Change
JUNOSe 11.1.x Command Reference Guide N to Z rtr reaction-configuration path-change rtr reaction-configuration rtrIndex path-change Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables path change reaction. When the type of RTR entry is echo, you cannot Description configure the path-change trap. There is no no version. See the no rtr reaction-configuration command.
Page 457: Rtr Reaction-Configuration Test-Completion
Chapter 6: R Commands rtr reaction-configuration test-completion rtr reaction-configuration rtrIndex test-completion Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables test completion reaction. There is no no version. See the no rtr Description reaction-configuration command. rtrIndex Number of the operation to be configured, in the range 1–4294967295 Options Global Configuration Mode...
Page 458: Rtr Reaction-Configuration Test-Failure
JUNOSe 11.1.x Command Reference Guide N to Z rtr reaction-configuration test-failure rtr reaction-configuration rtrIndex test-failure [ testFailureValue ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables test failure reaction to occur. When the type of RTR entry is echo, you can Description also configure a value that triggers the test-failure trap.
Page 459: Rtr Reset
Chapter 6: R Commands rtr reset [ no ] rtr reset Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Shuts down all RTR operations and clears the RTR configuration for the given virtual Description router. The no version negates the reset operation. Global Configuration Mode rtr reset...
Page 460: Rtr Schedule
JUNOSe 11.1.x Command Reference Guide N to Z rtr schedule [ no ] rtr schedule rtrIndex Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Configures the RTR time parameters for an RTR operation. The no version stops the Description operation by putting it in the pending state.
Page 461: Rtr Schedule Life
Chapter 6: R Commands rtr schedule life rtr schedule rtrIndex life lifeValue Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the length of the RTR probe. There is no no version. Description rtrIndex Number of the operation to be configured, in the range 1–4294967295; Options no default lifeValue Number of operations or maximum TTL in the range 1–2147483647;...
Page 462: Rtr Schedule Restart-Time
JUNOSe 11.1.x Command Reference Guide N to Z rtr schedule restart-time rtr schedule rtrIndex restart-time restartValue Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the interval at which the RTR probe restarts, in seconds. There is no no Description version.
Page 463: Rtr Schedule Start-Time
Chapter 6: R Commands rtr schedule start-time rtr schedule rtrIndex start-time { now | pending } Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Configures an entry’s start. There is no no version. Description rtrIndex Number of the operation to be configured, in the range 1–4294967295; Options no default now RTR immediately begins to collect information.
Page 464: Run
JUNOSe 11.1.x Command Reference Guide N to Z run execCommand Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Allows you to issue an Exec mode command from any configuration command Description mode. This command functions the same as the do command. There is no no version. execCommand CLI command that you can issue from User Exec or Privileged Options Exec mode...
Page 465: Chapter 7 S Commands
Chapter 7 S Commands...
Page 466: Sample
JUNOSe 11.1.x Command Reference Guide N to Z sample sample value-id mibId Syntax no sample Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the MIB object that you want to sample for the trigger that you are Description configuring. The no version removes the MIB object from the trigger. mibId Object ID for the MIB object that you want to sample, for example, Options 1.3.6.1.2.1.60.1.2.1.1.7...
Page 467: Samples-Of-History-Kept
Chapter 7: S Commands samples-of-history-kept samples-of-history-kept samples Syntax no samples-of-history-kept Command introduced before JUNOSe Release 7.1.0. Release Information Sets the number of entries kept in the history table for each RTR operation. The no Description version restores the default value. samples Number of entries for each RTR index in the history table;...
Page 468: Schedule Macro
JUNOSe 11.1.x Command Reference Guide N to Z schedule macro schedule macro { interval { frequency freqInMinutes | time-of-day dayTime Syntax [day-of-week dayOfWeek | day-of-month dayOfMonth ] } | at atTime [ month day | day month ] } fileName macroName [ macroArg ]* no schedule macro [ fileName [ macroName ] ] Command introduced in JUNOSe Release 9.3.0.
Page 469: Scheduler-Profile
Chapter 7: S Commands scheduler-profile [ no ] scheduler-profile schedulerProfileName Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Configures a scheduler profile. The router supports up to 1000 scheduler profiles. Description The no version deletes the scheduler profile. schedulerProfileName Name of the scheduler profile Options Global Configuration Mode...
Page 470: Scramble
JUNOSe 11.1.x Command Reference Guide N to Z scramble [ no ] scramble Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables cell scrambling on a T3 Frame interface. The no version disables cell Description scrambling on the interface. If you issue this command, be sure to issue the dsu mode and dsu bandwidth commands.
Page 471: Sdh
Chapter 7: S Commands [ no ] sdh Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies that the interface supports SDH. The no version restores SONET operation Description on this interface. Controller Configuration Mode...
Page 472: Secret
JUNOSe 11.1.x Command Reference Guide N to Z secret secret [ encryptionType ] secretText Syntax no secret Command introduced before JUNOSe Release 7.1.0. Release Information Adds a secret to a user entry in the local user database. The new secret replaces an Description existing secret or password.
Page 473: Secure Ip Classifier-List
Chapter 7: S Commands secure ip classifier-list secure ip classifier-list classifierName { { classifier-auth-id { 0 } } | { [ traffic-class Syntax trafficClassName ] [ color { green | yellow | red } ] [ user-packet-class userPacketClassValue ] [ source-route-class routeClassValue ] [ destination-route-class routeClassValue ] [ local { true | false } ] [ not ] { protocol } [ not ] { sourceAddress sourceMask | host sourceHostAddress | any } [ sourceQualifier ]...
Page 474 JUNOSe 11.1.x Command Reference Guide N to Z sourceHostAddress Source host address to match any Matches any source or destination address sourceQualifier For UDP or TCP protocols, one of the following protocol-specific classifier parameters. See Creating or Modifying Classifier Control Lists for IP Policy Lists in the JUNOSe Policy Management Configuration Guide, for details.
Page 475 Chapter 7: S Commands ip-frag-offset Matches the specified IP fragmentation offset; use any of the following: eq 0 Equals 0 eq 1 Equals 1 gt 1 Greater than 1 precNum Upper three bits of the ToS byte; in the range 0–7 dsFieldNum Upper six bits of the ToS byte;...
Page 476: Secure Ipv6 Classifier-List
JUNOSe 11.1.x Command Reference Guide N to Z secure ipv6 classifier-list secure ipv6 classifier-list classifierName { { classifier-auth-id { 0 } } | { [ traffic-class Syntax trafficClassName ] [ color { green | yellow | red } ] [ user-packet-class userPacketClassValue ecopy.] [ source-route-class routeClassValue ] [ destination-route-class routeClassValue ] [ local { true | false } ] [ not ] { protocol } [ not ] { sourceAddress sourceMask | host sourceHostAddress | any }...
Page 477 Chapter 7: S Commands any Matches any source or destination address sourceQualifier For UDP or TCP protocols, one of the following protocol-specific classifier parameters. See Creating or Modifying Classifier Control Lists for IP Policy Lists in the JUNOSe Policy Management Configuration Guide, for details. portOperator One of the following Boolean operator keywords: lt (less than), gt (greater than), eq (equal to), ne (not equal), or range (range of port numbers)
Page 478 JUNOSe 11.1.x Command Reference Guide N to Z ip-frag-offset Matches the specified IP fragmentation offset; use any of the following: eq 0 Equals 0 eq 1 Equals 1 gt 1 Greater than 1 precNum Upper three bits of the ToS byte; in the range 0–7 dsFieldNum Upper six bits of the ToS byte;...
Page 479: Secure Ip Policy-List
Chapter 7: S Commands secure ip policy-list [ no ] secure ip policy-list policyName Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Creates or modifies a secure IP policy list. Enters Policy List Configuration mode, Description enabling you to specify the parameters of the secure IP policy list. If you enter Policy List Configuration mode and then type exit without specifying any parameters, the router creates a policy list with a mirror disable rule.
Page 480: Secure Ipv6 Policy-List
JUNOSe 11.1.x Command Reference Guide N to Z secure ipv6 policy-list [ no ] secure ipv6 policy-list policyName Syntax Command introduced in JUNOSe Release 10.1.0. Release Information Creates or modifies a secure IPv6 policy list. Enters Policy List Configuration mode, Description enabling you to specify the parameters of the secure IPv6 policy list.
Page 481: Secure L2Tp Policy-List
Chapter 7: S Commands secure l2tp policy-list [ no ] secure l2tp policy-list policyName Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Creates or modifies a secure L2TP policy list. Enters Policy List Configuration mode, Description enabling you to specify the parameters of the secure L2TP policy list. If you enter Policy List Configuration mode and then type exit without specifying any parameters, the router creates a policy list with a mirror disable rule.
Page 482: Send
JUNOSe 11.1.x Command Reference Guide N to Z send send { * | absoluteLineNumber | console consoleLineNumber | vty vtyLineNumber } Syntax [ message ] Command introduced before JUNOSe Release 7.1.0. Release Information Sends a message to one or more terminals. If you begin the message on the same Description line as the command, the first character is a delimiter;...
Page 483: Send-More-Specific-Routes-Disable
Chapter 7: S Commands send-more-specific-routes-disable [ no ] send-more-specific-routes-disable Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies that RIP does not send a more-specific route if it has a less-specific route Description with any metric. The no version restores the default condition, wherein RIP always sends a more-specific route even if a less-specific route with a metric is available.
Page 484: Send Version
JUNOSe 11.1.x Command Reference Guide N to Z send version [ no ] send version [ 1 | 2 | off ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Restricts the RIP version that the router can send on a remote-neighbor interface. Description The no version sets the remote-neighbor interface back to the default value, sending only RIP version 1.
Page 485: Serial Description
Chapter 7: S Commands serial description serial description name Syntax no serial description Command introduced before JUNOSe Release 7.1.0. Release Information Assigns a text description or an alias to a serial HDLC interface. Use the show Description interfaces serial command to display the text description. The no version removes the description or alias.
Page 486: Server-Address
JUNOSe 11.1.x Command Reference Guide N to Z server-address server-address address Syntax no server-address [ address ] Command introduced before JUNOSe Release 7.1.0. Release Information Sets the DHCP server address that is sent to DHCP clients. The no version removes Description server address.
Page 487: Server-Name
Chapter 7: S Commands server-name server-name serverName Syntax no server-name Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the hostname expected from the L2TP LNS when you set up a tunnel. The Description no version removes the server name. serverName Hostname;...
Page 488: Service
JUNOSe 11.1.x Command Reference Guide N to Z service service { empty-service-name action actionValue | serviceName [ action actionValue Syntax ] | unknown-service-name action actionValue } no service { empty-service-name | serviceName | unknown-service-name } Command introduced before JUNOSe Release 7.1.0. Release Information unknown-service-name keyword added in JUNOSe Release 10.1.0.
Page 489: Service Check-Config
Chapter 7: S Commands service check-config [ no ] service check-config [ auto | fileName fileName | running-configuration | Syntax running-configuration recover | auto-recover ] Command introduced in JUNOSe Release 9.3.0. Release Information auto-recover keyword added in JUNOSe Release 10.3.0. Detects corruption of running configuration and CNF files on both the primary and Description the standby SRP when it is due to a fatal duplicate key error.
Page 490: Service Config-Monitor-Periodicity
JUNOSe 11.1.x Command Reference Guide N to Z service config-monitor-periodicity service config-monitor-periodicity time Syntax Command introduced in JUNOSe Release 9.3.0. Release Information Sets the time of the monitoring task for detecting corruption of a running configuration Description on both the primary and the standby SRP. There is no no version. time Periodicity value of the monitor task in seconds Options Global Configuration...
Page 491: Service Ctrl-X-Reboot
Chapter 7: S Commands service ctrl-x-reboot [ no ] service ctrl-x-reboot Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables the Ctrl+x key combination to reboot the router at all times, except that Description the key combination has no effect if you are accessing the router through a Telnet session.
Page 492: Service-Description
JUNOSe 11.1.x Command Reference Guide N to Z service-description service-description serviceDescription Syntax no service-description Command introduced before JUNOSe Release 7.1.0. Release Information Provides a description that is associated with the AAA profile. The description can Description be used for RADIUS authentication and accounting. The no version negates the command.
Page 493: Service Dhcp-External
Chapter 7: S Commands service dhcp-external [ no ] service dhcp-external Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables the DHCP external server. The no version disables the DHCP external server Description and does not save the previous settings. Global Configuration Mode service dhcp-external...
Page 494: Service Dhcp-Local
JUNOSe 11.1.x Command Reference Guide N to Z service dhcp-local [ no ] service dhcp-local [ equal-access | standalone [ authenticate ] ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables the DHCP local server. In standalone mode, the authenticate keyword Description enables AAA-based authentication for incoming DHCP clients.
Page 495: Service Dhcpv6-Local
Chapter 7: S Commands service dhcpv6-local [ no ] service dhcpv6-local Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables the DHCPv6 local server. The no version disables the DHCPv6 local server. Description Global Configuration Mode service dhcpv6-local...
Page 496: Service-Management Install
JUNOSe 11.1.x Command Reference Guide N to Z service-management install [ no ] service-management install fileName.mac Syntax Command introduced in JUNOSe Release 7.2.0. Release Information Installs the specified Service Manager definition. The no version removes the specified Description definition. fileName Name of the service definition macro file, including the .mac extension Options Global Configuration Mode...
Page 497: Service-Management Owner-Session
Chapter 7: S Commands service-management owner-session [ no ] service-management owner-session ownerName ownerId Syntax service-session serviceName [ service-session-profile profileName ] Command introduced in JUNOSe Release 8.0.0. Release Information Activates subscriber service sessions based on the specified owner and Description owner-generated ID. The no version gracefully removes the specified service session for the specified owner session.
Page 498: Service-Management Service-Session-Profile
JUNOSe 11.1.x Command Reference Guide N to Z service-management service-session-profile [ no ] service-management service-session-profile profileName Syntax Command introduced in JUNOSe Release 7.2.0. Release Information Creates a new Service Manager service session profile or specifies the name of an Description existing service session profile, then enters Service Session Profile Configuration mode.
Page 499: Service-Management Subscriber-Session
Chapter 7: S Commands service-management subscriber-session [ no ] service-management subscriber-session subscriberName Syntax interface interfaceType interfaceSpecifier Command introduced in JUNOSe Release 7.2.0. Release Information Privileged Exec mode added in JUNOSe Release 8.0.0. Activates a subscriber session for the specified subscriber. The no version gracefully Description removes the subscriber session and all service sessions associated with this subscriber session.
Page 500: Service-Management Subscriber-Session Force
JUNOSe 11.1.x Command Reference Guide N to Z service-management subscriber-session force no service-management subscriber-session subscriberSessionId force Syntax This command has only a no version. See the no service-management Description subscriber-session force command for a complete description and syntax. Immediately terminates the specified subscriber session and deletes all service sessions associated with the subscriber session.
Page 501: Service-Management Subscriber-Session Service-Session
Chapter 7: S Commands service-management subscriber-session service-session [ no ] service-management subscriber-session subscriberName Syntax interface interfaceType interfaceSpecifier service-session serviceName | [ service-session-profile profileName ] Command introduced in JUNOSe Release 7.2.0. Release Information Privileged Exec mode added in JUNOSe Release 8.0.0. Activates a subscriber session and service session for the specified subscriber.
Page 502: Service Manual-Commit
JUNOSe 11.1.x Command Reference Guide N to Z service manual-commit [ no ] service manual-commit Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Stops the router from automatically saving configuration changes to nonvolatile Description storage. Places the router into Manual Commit mode; this mode has no effect on the CLI prompt.
Page 503: Service Password-Encryption
Chapter 7: S Commands service password-encryption [ no ] service password-encryption Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Directs the router to encrypt passwords that are saved in the configuration file. The Description command should be used as a simple cipher to prevent unauthorized users from viewing passwords.
Page 504: Service Show-Config
JUNOSe 11.1.x Command Reference Guide N to Z service show-config service show-config format { 1 | 2 } Syntax no service show-config format Command introduced before JUNOSe Release 7.1.0. Release Information Formats show configuration command output. The no version reverts the show Description configuration command format to its default (format 1).
Page 505: Service Timestamps
Chapter 7: S Commands service timestamps service timestamps log datetime [ show-timezone [ localtime ] ] Syntax no service timestamps [ log ] Command introduced before JUNOSe Release 7.1.0. Release Information Formats timestamps associated with log messages. The no version removes Description timestamps from log messages.
Page 506: Service Unattended-Password-Recovery
JUNOSe 11.1.x Command Reference Guide N to Z service unattended-password-recovery [ no ] service unattended-password-recovery Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Allows you to delete all passwords and secrets from the console without being Description physically present at the router. When executed, this command changes the behavior of the erase secrets command, which will not take any parameters and will not be available through a vty session.
Page 507: Session-Out-Of-Resource-Result-Code-Override
Chapter 7: S Commands session-out-of-resource-result-code-override [ no ] session-out-of-resource-result-code-override Syntax Command introduced in JUNOSe Release 9.2.0. Release Information Overrides out-of-resource result codes 4 [Call failed due to lack of appropriate facilities Description being available (temporary condition)] and 5 [Call failed due to lack of appropriate facilities being available (permanent condition)] with code 2 (Call disconnected for the reason indicated in error code) on a router configured as an LNS.
Page 508: Session-Timeout
JUNOSe 11.1.x Command Reference Guide N to Z session-timeout [ no ] session-timeout timeOutValue Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Defines the ANCP session timeout value (in seconds). The no version reverts the Description session timeout to its default setting (25 seconds). timeOutValue Session timeout in seconds, in the range 1–25;...
Page 509: Set
Chapter 7: S Commands set object Syntax { context-name contextName [ wildcard ] | id mibId | value objectValue } no set [ object { context-name | id | value } ] Command introduced before JUNOSe Release 7.1.0. Release Information Performs an SNMP set operation under certain event conditions.
Page 510: Set Admission-Bandwidth
JUNOSe 11.1.x Command Reference Guide N to Z set admission-bandwidth set admission-bandwidth { bandwidthValue | adaptive } Syntax no set admission-bandwidth Command introduced in JUNOSe Release 7.1.0. Release Information adaptive keyword added in JUNOSe Release 7.2.0. Sets a specific multicast bandwidth for admission control or defines the bandwidth Description as adaptive (automatically sensed).
Page 511: Set As-Path Prepend
Chapter 7: S Commands set as-path prepend set as-path prepend { list listName | asPathNumber [ asPathNumber ]* } Syntax no set as-path prepend Command introduced before JUNOSe Release 7.1.0. Release Information Prepends one or more AS numbers or a list of AS numbers to the AS path for BGP Description routes.
Page 512: Set Automatic-Tag
JUNOSe 11.1.x Command Reference Guide N to Z set automatic-tag [ no ] set automatic-tag Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Automatically computes the tag value. The no version removes the set clause from Description a route map. Route Map Configuration Mode set automatic-tag...
Page 513: Set Comm-List Delete
Chapter 7: S Commands set comm-list delete set comm-list { communityList | regularExpression } delete Syntax no set comm-list Command introduced before JUNOSe Release 7.1.0. Release Information Removes communities specified by the community list from the community attribute Description of routes matching the route map. The no version removes the set clause from a route map.
Page 514: Set Community
JUNOSe 11.1.x Command Reference Guide N to Z set community set community { list communityListName [ additive ] | none } Syntax set community { communityNumber | knownCommunity | asCommunNumber } [ communityNumber | knownCommunity | asCommunNumber ]* [ additive ] no set community Command introduced before JUNOSe Release 7.1.0.
Page 515: Set Dampening
Chapter 7: S Commands set dampening set dampening halfLife reuse suppress maxSuppressTime [ halfLifeUnreachable ] Syntax no set dampening Command introduced before JUNOSe Release 7.1.0. Release Information Enables route flap dampening and optionally specifies dampening parameters for Description routes passing through the route map. The no version removes the set clause from a route map.
Page 516: Set Dhcp Relay
JUNOSe 11.1.x Command Reference Guide N to Z set dhcp relay To create the DHCP relay independent of any DHCP servers and to explicitly delete Syntax the DHCP server [ no ] set dhcp relay To create and disable the DHCP relay for a specific DHCP server set dhcp relay { dhcpServerAddress [ proxy ] | agent [ circuit-ID-only | remote-ID-only ] |inhibit-access-route-creation | discard-access-routes { all | interfaceType interfaceSpecifier | | unknown } }...
Page 517 Chapter 7: S Commands circuit-ID-only Specifies circuit ID suboption (suboption 1) only remote-ID-only Specifies remote-ID suboption (suboption 2) only inhibit-access-route-creation Specifies that host routes are not installed; enforces consistent state of route/client database In relay mode, removes all installed host routes from IP; deletes all host routes data in the routing table and NVS;...
Page 518: Set Dhcp Relay Agent Sub-Option
JUNOSe 11.1.x Command Reference Guide N to Z set dhcp relay agent sub-option set dhcp relay agent sub-option { circuit-id | remote-id | vendor-specific Syntax { layer2-circuit-id | user-packet-class } } no set dhcp relay agent sub-option { circuit-id | remote-id | vendor-specific [ layer2-circuit-id | user-packet-class ] } Command introduced in JUNOSe Release 8.0.0.
Page 519: Set Dhcp Relay Assign-Giaddr-Source-Ip
Chapter 7: S Commands set dhcp relay assign-giaddr-source-ip [ no ] set dhcp relay assign-giaddr-source-ip Syntax Command introduced in JUNOSe Release 7.1.0. Release Information Configures DHCP relay and DHCP relay proxy to assign the gateway IP address Description (giaddr) to the source IP address of traffic they send to DHCP servers. The no version restores the default, in which the DHCP relay and DHCP relay proxy do not assign the giaddr to the source IP address.
Page 520: Set Dhcp Relay Broadcast-Flag-Replies
JUNOSe 11.1.x Command Reference Guide N to Z set dhcp relay broadcast-flag-replies [ no ] set dhcp relay broadcast-flag-replies Syntax Command introduced in JUNOSe Release 8.1.0. Release Information Configures DHCP relay and DHCP relay proxy to use the setting of the broadcast flag Description in the DHCP request packet to control how DHCP Offer reply packets and ACK and NAK reply packets are transmitted to DHCP clients during the discovery process.
Page 521: Set Dhcp Relay Giaddr-Selects-Interface
Chapter 7: S Commands set dhcp relay giaddr-selects-interface [ no ] set dhcp relay giaddr-selects-interface Syntax Command introduced in JUNOSe Release 8.0.0. Release Information Configures DHCP relay to use information in the giaddr in the DHCP ACK packets Description that are generated by the server and destined for the DHCP client. The DHCP server uses this information to determine the primary interface that is used to optionally build dynamic subscriber interfaces.
Page 522: Set Dhcp Relay Layer2-Unicast-Replies
JUNOSe 11.1.x Command Reference Guide N to Z set dhcp relay layer2-unicast-replies [ no ] set dhcp relay layer2-unicast-replies Syntax Command introduced in JUNOSe Release 7.2.0. Release Information Configures DHCP relay and DHCP relay proxy to use the optional layer 2 unicast and Description layer 3 broadcast transmission method to transmit DHCP Offer reply packets and ACK reply packets to DHCP clients during the discovery process.
Page 523: Set Dhcp Relay Options
Chapter 7: S Commands set dhcp relay options set dhcp relay options { hostname | vrname | exclude-subinterface-id } Syntax no set dhcp relay options [ hostname | vrname | exclude-subinterface-id ] Command introduced before JUNOSe Release 7.1.0. Release Information Configures the relay agent option 82 information that the router adds to DHCP packets Description before it relays the packets to the DHCP server.
Page 524: Set Dhcp Relay Override
JUNOSe 11.1.x Command Reference Guide N to Z set dhcp relay override [ no ] set dhcp relay override { agent-option | giaddr } Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Configures DHCP relay to override the relay agent option 82 or giaddr values in Description packets destined for a DHCP server.
Page 525: Set Dhcp Relay Preserve-Trusted-Client-Option
Chapter 7: S Commands set dhcp relay preserve-trusted-client-option [ no ] set dhcp relay preserve-trusted-client-option Syntax Command introduced in JUNOSe Release 7.1.0. Release Information Configures DHCP relay and DHCP relay proxy to prevent option 82 information from Description being stripped from packets destined for a trusted client. The no version restores the default, in which the option 82 information is stripped from the packets.
Page 526: Set Dhcp Relay Proxy Send-First-Offer
JUNOSe 11.1.x Command Reference Guide N to Z set dhcp relay proxy send-first-offer [ no ] set dhcp relay proxy send-first-offer Syntax Command introduced in JUNOSe Release 8.0.0. Release Information Configures the DHCP relay proxy to immediately send the first DHCP offer it receives Description from any DHCP server to the DHCP client.
Page 527: Set Dhcp Relay Proxy Timeout
Chapter 7: S Commands set dhcp relay proxy timeout set dhcp relay proxy timeout hours Syntax no set dhcp relay proxy timeout Command introduced before JUNOSe Release 7.1.0. Release Information Sets the time that the DHCP relay proxy waits for a renewal message from the DHCP Description client after a reboot or switchover occurs.
Page 528: Set Dhcp Relay Trust-All
JUNOSe 11.1.x Command Reference Guide N to Z set dhcp relay trust-all [ no ] set dhcp relay trust-all Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables the DHCP relay trust-all method. When the trust-all method is enabled, the Description DHCP relay processes packets that are destined for a DHCP server as if they are from trusted sources.
Page 529: Set Dhcp Vendor-Option
Chapter 7: S Commands set dhcp vendor-option To set the default action to take when the option 60 string does not match a Syntax configured vendor-option string: [ no ] set dhcp vendor-option default [ drop | local-server | proxy-client | relay address | relay-server-list ] To set the action to take when the option 60 string matches a configured vendor-option string:...
Page 530: Set Distance
JUNOSe 11.1.x Command Reference Guide N to Z set distance set distance distance Syntax no set distance Command introduced before JUNOSe Release 7.1.0. Release Information Configures an administrative distance to apply to routes that match the route map. Description The no version removes the set clause from a route map. NOTE: Setting a distance in a route map is useful only when it is set on a route being installed into the routing table.
Page 531: Set Extcommunity
Chapter 7: S Commands set extcommunity set extcommunity Syntax { rt extCommValue [ extCommValue ]* [ additive ] } | { soo extCommValue } no set extcommunity Command introduced before JUNOSe Release 7.1.0. Release Information Sets the BGP extended communities attribute. The no version removes the set clause Description from a route map.
Page 532: Set Ip Interface-Profile
JUNOSe 11.1.x Command Reference Guide N to Z set ip interface-profile set ip interface-profile profileName Syntax no set ip interface-profile Command introduced before JUNOSe Release 7.1.0. Release Information Specifies a dynamic IP interface profile that is used in the route map. The no version Description removes the interface profile from the route map.
Page 533: Set Ip Next-Hop
Chapter 7: S Commands set ip next-hop set ip next-hop { ipAddress | interface interfaceType interfaceSpecifier | Syntax peerAddress } no set ip next-hop [ ipAddress | peerAddress] Command introduced before JUNOSe Release 7.1.0. Release Information Indicates where to send packets that pass a match clause of a route map for policy Description routing.
Page 534: Set Ip Service-Profile
JUNOSe 11.1.x Command Reference Guide N to Z set ip service-profile set ip service-profile profileName Syntax no set ip service-profile Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the name of a subscriber’s service profile that is used in the route map. The Description no version removes the service profile from the route map.
Page 535: Set Ip Source-Prefix
Chapter 7: S Commands set ip source-prefix [ no ] set ip source-prefix ipAddress ipMask { deny | primary } Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies a source address range that will be inserted into a specific interface and Description the action to take with the range.
Page 536: Set Ipv6 Next-Hop
JUNOSe 11.1.x Command Reference Guide N to Z set ipv6 next-hop [ no ] set ipv6 next-hop ipv6Address [ localAddress ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Indicates where to send packets that pass a match clause of a route map for IPv6 Description policy routing.
Page 537: Set Level
Chapter 7: S Commands set level set level atLevel Syntax no set level Command introduced before JUNOSe Release 7.1.0. Release Information Specifies where to import routes when all of a route map’s match criteria are met. Description The no version removes the set clause from a route map. atLevel Specifies one of the following levels: Options level-1 Imports routes into a level 1 area...
Page 538: Set Local-Preference
JUNOSe 11.1.x Command Reference Guide N to Z set local-preference set local-preference value Syntax no set local-preference Command introduced before JUNOSe Release 7.1.0. Release Information Specifies a preference value for the AS path. The no version removes the set clause Description from a route map.
Page 539: Set Metric
Chapter 7: S Commands set metric set metric [ +relValue | -relValue | absValue ] Syntax no set metric Command introduced before JUNOSe Release 7.1.0. Release Information Modifies the metric value (for BGP, the MED) for a route that matches the route map Description by applying a relative or absolute metric.
Page 540: Set Metric-Type
JUNOSe 11.1.x Command Reference Guide N to Z set metric-type set metric-type atMetric Syntax no set metric-type Command introduced before JUNOSe Release 7.1.0. Release Information Sets the metric type for the destination routing protocol. The no version removes Description the set clause from a route map. atMetric Specifies the metric type from the following choices: Options For BGP:...
Page 541: Set Mpls-Label
Chapter 7: S Commands set mpls-label [ no ] set mpls-label Syntax Command introduced in JUNOSe Release 7.1.0. Release Information Configures BGP to advertise prefixes that match the route map as labeled prefixes. Description The no version removes the configuration. Route Map Configuration Mode set mpls-label...
Page 542: Set Origin
JUNOSe 11.1.x Command Reference Guide N to Z set origin set origin atOrigin Syntax no set origin Command introduced before JUNOSe Release 7.1.0. Release Information Sets the BGP origin of an advertised route. The no version removes the set clause Description from a route map.
Page 543: Set-Overload-Bit
Chapter 7: S Commands set-overload-bit [ no ] set-overload-bit [ on-startup seconds | on-startup wait-for-bgp Syntax [ bgpSeconds ] ] Command introduced before JUNOSe Release 7.1.0. Release Information Sets the overload bit, indicating to other IS-IS routers not to use this router as an Description intermediate hop in their SPF calculations.
Page 544: Set Priority
JUNOSe 11.1.x Command Reference Guide N to Z set priority set priority priorityValue Syntax no set priority Command introduced in JUNOSe Release 8.2.0. Release Information Configures a priority value for the <S, G>data stream. Dynamic multicast admission Description control enables only prioritized groups to join the interface after the configured priority limit is reached on the physical port.
Page 545: Set Qos-Bandwidth
Chapter 7: S Commands set qos-bandwidth set qos-bandwidth { bandwidthValue | adaptive } Syntax no set qos-bandwidth Command introduced in JUNOSe Release 7.1.0. Release Information adaptive keyword added in JUNOSe Release 7.2.0. Sets a multicast bandwidth for QoS adjustment or defines the bandwidth as adaptive Description (automatically sensed).
Page 546: Set Route-Class
JUNOSe 11.1.x Command Reference Guide N to Z set route-class set route-class routeClass Syntax no set route-class Command introduced before JUNOSe Release 7.1.0. Release Information Sets the route class attribute for a route map. The no version deletes the route class Description attribute.
Page 547: Set Route-Type
Chapter 7: S Commands set route-type set route-type { internal | internal-intra | internal-inter | external } Syntax no set route-type Command introduced before JUNOSe Release 7.1.0. Release Information Sets routes of the specified type. The no version removes the set clause from a route Description map.
Page 548: Set Tag
JUNOSe 11.1.x Command Reference Guide N to Z set tag set tag tagValue Syntax no set tag Command introduced before JUNOSe Release 7.1.0. Release Information Sets the tag value of the destination routing protocol. The no version removes the Description set clause from a route map.
Page 549: Set Threshold
Chapter 7: S Commands set threshold set threshold thresholdValue Syntax no set threshold Command introduced in JUNOSe Release 8.2.0. Release Information Configures a threshold value for multicast VPN applications. The no version removes Description the threshold value. thresholdValue Threshold value for multicast VPN applications Options Global Configuration Mode...
Page 550: Set Weight
JUNOSe 11.1.x Command Reference Guide N to Z set weight [ no ] set weight value Syntax no set weight Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the BGP weight for the routing table. Overrides the weights assigned by Description using the neighbor weight and neighbor filter-list commands.
Page 551: Shadow-Node
Chapter 7: S Commands shadow-node [ no ] typeOfInterface shadow-node [ group trafficClassGroup | scheduler-profile Syntax schedulerProfileName ]* Command introduced in JUNOSe Release 8.0.0. Release Information Specifies that a shadow node be configured for each interface of the given interface Description type.
Page 552: Shaping-Rate
JUNOSe 11.1.x Command Reference Guide N to Z shaping-rate shaping-rate shapingRate [ operator operandValue ]* [ bps | kbps ] Syntax [ burst burstSize [ milliseconds | bytes ] ] shaping-rate operandValue [ operator operandValue ]* [ bps | kbps ] no shaping-rate Command introduced before JUNOSe Release 7.1.0.
Page 553 Chapter 7: S Commands Configuring Port Shaping Configuring a Basic Parameter Definition for QoS Administrators shaping-rate...
Page 554: Shared-Shaping-Constituent
JUNOSe 11.1.x Command Reference Guide N to Z shared-shaping-constituent shared-shaping-constituent [ priority [ priorityValue ] | weight [ weightValue ] ] Syntax no shared-shaping-constituent Command introduced before JUNOSe Release 7.1.0. Release Information Sets the attributes of implicit and explicit shared-shaping constituents and specifies Description explicit shared-shaping constituents.
Page 555: Shared-Shaping-Rate
Chapter 7: S Commands shared-shaping-rate shared-shaping-rate sharedShapingRate [ operator operandValue ]* [ bps | kbps ] Syntax [ burst burstSize [ milliseconds | bytes ] ] { simple | compound | auto } [ explicit-constituents ] shared-shaping-rate operandValue [ operator operandValue ]* [ bps | kbps ] [ burst burstSize [ milliseconds | bytes ] ] { simple | compound | auto } [ explicit-constituents ] no shared-shaping-rate...
Page 556 JUNOSe 11.1.x Command Reference Guide N to Z simple Specifies the simple form of shared shaping, which does not manage voice and video traffic, but shapes data queue rates to the value of the shared rate minus the combined voice and video traffic rate auto Specifies that the router automatically selects the type of shared shaping depending on the module;...
Page 557: Show Aaa Accounting
Chapter 7: S Commands show aaa accounting show aaa accounting [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays AAA accounting configuration information, including the destinations where Description broadcast and duplicate accounting records are sent. filter See Filtering show Commands on page 4 Options Privileged Exec Mode...
Page 558: Show Aaa Accounting Default
JUNOSe 11.1.x Command Reference Guide N to Z show aaa accounting default show aaa accounting { subscriberType } default [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the AAA accounting method used for the particular type of subscriber. Description subscriberType Specifies the type of subscriber: Options...
Page 559: Show Aaa Accounting Interval
Chapter 7: S Commands show aaa accounting interval show aaa accounting interval [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about the user and service accounting interval. Description filter See Filtering show Commands on page 4 Options Privileged Exec Mode...
Page 560: Show Aaa Accounting Vr-Group
JUNOSe 11.1.x Command Reference Guide N to Z show aaa accounting vr-group show aaa accounting vr-group [ vrGroupName ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the name of a particular virtual router group or the names of all virtual router Description groups configured on the router.
Page 561: Show Aaa Authentication Default
Chapter 7: S Commands show aaa authentication default show aaa authentication { subscriberType } default [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the AAA authentication method list used for the particular type of subscriber. Description subscriberType Specifies the type of subscriber: Options...
Page 562: Show Aaa Delimiters
JUNOSe 11.1.x Command Reference Guide N to Z show aaa delimiters show aaa delimiters [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the domain name and realm name delimiters, parse order, and parse Description direction configured on the router. filter See Filtering show Commands on page 4 Options Privileged Exec...
Page 563: Show Aaa Domain-Map
Chapter 7: S Commands show aaa domain-map show aaa domain-map [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the mapping between user domains and virtual routers. The display includes Description a tunnel group if one is assigned to the domain map. filter See Filtering show Commands on page 4 Options Privileged Exec...
Page 564: Show Aaa Dhcpv6-Delegated-Prefix
JUNOSe 11.1.x Command Reference Guide N to Z show aaa dhcpv6-delegated-prefix show aaa dhcpv6-delegated-prefix [ filter ] Syntax Command introduced in JUNOSe Release 10.1.0. Release Information Displays the RADIUS attribute used for DHCPv6 Prefix Delegation. Description filter See “Filtering show Commands” on page 4. Options Privileged Exec Mode...
Page 565: Show Aaa Duplicate-Address-Check
Chapter 7: S Commands show aaa duplicate-address-check show aaa duplicate-address-check [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Configures AAA to query the routing table for duplicate address assignment before Description granting access. filter See Filtering show Commands on page 4 Options Privileged Exec Mode...
Page 566: Show Aaa Intf-Desc-Format
JUNOSe 11.1.x Command Reference Guide N to Z show aaa intf-desc-format show aaa intf-desc-format Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays whether the router includes or excludes the subinterface number and adapter Description in the interface description that the router passes to RADIUS for inclusion in the NAS-Port-Id attribute Privileged Exec Mode...
Page 567: Show Aaa Ipv6-Nd-Ra-Prefix
Chapter 7: S Commands show aaa ipv6-nd-ra-prefix show aaa ipv6-nd-ra-prefix [ filter ] Syntax Command introduced in JUNOSe Release 10.1.0. Release Information Displays the RADIUS attribute used for IPv6 Neighbor Discovery router Description advertisements. filter See “Filtering show Commands” on page 4. Options Privileged Exec Mode...
Page 568: Show Aaa Model
JUNOSe 11.1.x Command Reference Guide N to Z show aaa model show aaa model [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays AAA model. Description filter See Filtering show Commands on page 4 Options Privileged Exec Mode show aaa model...
Page 569: Show Aaa Name-Servers
Chapter 7: S Commands show aaa name-servers show aaa name-servers [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the IP addresses of the primary and secondary DNS and WINS name servers. Description filter See Filtering show Commands on page 4 Options Privileged Exec Mode...
Page 570: Show Aaa Profile
JUNOSe 11.1.x Command Reference Guide N to Z show aaa profile show aaa profile [ brief | name profileName ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays AAA profile names and the actions associated with each specified AAA Description profile name.
Page 571: Show Aaa Qos Downstream-Rate
Chapter 7: S Commands show aaa qos downstream-rate show aaa qos downstream-rate Syntax Command introduced in JUNOSe Release 8.1.0. Release Information Displays whether the QoS downstream rate application is enabled to use downstream Description rates obtained from the Actual-Data-Rate-Downstream [26-30] DSL Forum VSA. Privileged Exec Mode Monitoring the AAA Downstream Rate for QoS...
Page 572: Show Aaa Route-Download
JUNOSe 11.1.x Command Reference Guide N to Z show aaa route-download show aaa route-download [ statistics [ delta ] ] [ filter ] Syntax Command introduced in JUNOSe Release 8.1.0. Release Information Displays AAA route download statistics. Description delta Displays baselined statistics Options filter See Filtering show Commands on page 4 Privileged Exec...
Page 573: Show Aaa Route-Download Routes
Chapter 7: S Commands show aaa route-download routes show aaa route-download routes [ vrfName ] [ detail ] [ filter ] Syntax Command introduced in JUNOSe Release 8.1.0. Release Information Displays information about AAA downloaded routes. Description vrfName Name of a virtual routing and forwarding instance to display Options detail Displays detailed information about downloaded routes filter See Filtering show Commands on page 4...
Page 574: Show Aaa Route-Download Routes Global
JUNOSe 11.1.x Command Reference Guide N to Z show aaa route-download routes global show aaa route-download routes global [ start startString ] [ detail ] [ filter ] Syntax Command introduced in JUNOSe Release 8.1.0. Release Information Displays information about AAA downloaded routes for all virtual routers and VRFs. Description startString String that specifies the first router context to display in the output;...
Page 575: Show Aaa Service Accounting Interval
Chapter 7: S Commands show aaa service accounting interval show aaa service accounting interval [ filter ] Syntax Command introduced in JUNOSe Release 9.0.0. Release Information Displays the default accounting interval used by the Service Manager application for Description RADIUS-initiated services associated with users attached to this virtual router. filter See Filtering show Commands on page 4 Options Privileged Exec...
Page 576: Show Aaa Statistics
JUNOSe 11.1.x Command Reference Guide N to Z show aaa statistics show aaa statistics [ delta ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the authentication and authorization statistics. Description delta Displays baselined statistics Options filter See Filtering show Commands on page 4 Privileged Exec...
Page 577: Show Aaa Subscriber Per-Port-Limit
Chapter 7: S Commands show aaa subscriber per-port-limit show aaa subscriber per-port-limit [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the number of active subscribers on each interface. Description filter See Filtering show Commands on page 4 Options Privileged Exec Mode...
Page 578: Show Aaa Subscriber Per-Vr-Limit
JUNOSe 11.1.x Command Reference Guide N to Z show aaa subscriber per-vr-limit show aaa subscriber per-vr-limit [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the number of active subscribers on each virtual router. Description filter See Filtering show Commands on page 4 Options Privileged Exec Mode...
Page 579: Show Aaa Timeout
Chapter 7: S Commands show aaa timeout show aaa timeout [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about the idle and session timeouts. Description filter See Filtering show Commands on page 4 Options Privileged Exec Mode show aaa timeout...
Page 580: Show Aaa Tunnel-Group
JUNOSe 11.1.x Command Reference Guide N to Z show aaa tunnel-group show aaa tunnel-group [ tunnelGroupName ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays currently configured tunnel groups. Description tunnelGroupName Name of the tunnel group Options filter See Filtering show Commands on page 4 Privileged Exec...
Page 581: Show Aaa Tunnel-Parameters
Chapter 7: S Commands show aaa tunnel-parameters show aaa tunnel-parameters [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays default tunnel parameters that are configured for tunnel definitions. Description filter See Filtering show Commands on page 4 Options Privileged Exec Mode...
Page 582: Show Aaa User Accounting Interval
JUNOSe 11.1.x Command Reference Guide N to Z show aaa user accounting interval show aaa user accounting interval [ filter ] Syntax Command introduced in JUNOSe Release 9.0.0. Release Information Displays the default accounting interval for users attached to this virtual router. Description filter See Filtering show Commands on page 4 Options...
Page 583: Show Access-List
Chapter 7: S Commands show access-list show [ ip ] access-list [ accessListName ] [ detail ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays access list information about the access list specified. Description accessListName Name of the access list Options detail Displays detailed information about the access list filter See Filtering show Commands on page 4...
Page 584: Show Adjustment-Factor
JUNOSe 11.1.x Command Reference Guide N to Z show adjustment-factor show adjustment-factor [ adsl1 | adsl2 | adsl2+ | vdsl | vdsl2 | sds ] Syntax Command introduced in JUNOSe Release 9.1.0. Release Information Displays the configured QoS adjustment factor that is applied to the ANCP-reported Description downstream and upstream data rate for all DSL line types or for the specified DSL line types.
Page 585: Show Aps
Chapter 7: S Commands show aps show aps [ all [ group [ groupName ] ] ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information all keyword added in JUNOSe Release 7.2.0. Displays information about APS/MSP interfaces or groups from APS-capable controllers Description in the system.
Page 586: Show Arp
JUNOSe 11.1.x Command Reference Guide N to Z show arp show [ ip ] arp [ vrfName ] [ ipAddress ] [ interfaceType interfaceSpecifier ] [ all ] Syntax [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about the Address Resolution Protocol cache.
Page 587: Show Atm Aal5 Interface
Chapter 7: S Commands show atm aal5 interface show atm aal5 interface atm interfaceSpecifier [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays configuration information about an ATM AAL5 interface. Description interfaceSpecifier Particular interface; format varies according to interface type; Options see Interface Types and Specifiers on page 5 filter See Filtering show Commands on page 4...
Page 588: Show Atm Atm1483
JUNOSe 11.1.x Command Reference Guide N to Z show atm atm1483 show atm atm1483 Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays whether or not the router is set up to export ATM 1483 subinterface Description descriptions to line modules. Privileged Exec, User Exec Mode show atm atm1483...
Page 589: Show Atm Bulk-Config
Chapter 7: S Commands show atm bulk-config show atm bulk-config [ atm interfaceSpecifier ] [name bulkConfigName ] [ override ] Syntax [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information Displays information, including base profile assignments and overriding profile Description assignments, for the bulk-configured VC ranges on an ATM AAL5 interface.
Page 590: Show Atm Interface
JUNOSe 11.1.x Command Reference Guide N to Z show atm interface show atm interface {atm interfaceSpecifier | brief } [ delta ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays configuration information about an ATM interface or a brief description of Description all ATM (major) interfaces configured in the router.
Page 591: Show Atm Map
Chapter 7: S Commands show atm map show atm map [ mapName ] [ brief ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the list of all configured ATM static maps to remote hosts on an ATM network. Description mapName Name of the map list Options...
Page 592: Show Atm Mcpt-Timers
JUNOSe 11.1.x Command Reference Guide N to Z show atm mcpt-timers show atm mcpt-timers [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the current systemwide values configured on the router for the three ATM Description Martini cell packing timers.
Page 593: Show Atm Oam
Chapter 7: S Commands show atm oam show atm oam interfaceSpecifier [ vpi ] [ segment | end-to-end ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays F4 OAM statistics. Description interfaceSpecifier Particular interface; format varies according to interface type; Options see Interface Types and Specifiers on page 5 vpi Virtual path identifier...
Page 594: Show Atm Ping
JUNOSe 11.1.x Command Reference Guide N to Z show atm ping show atm ping [atm interfaceSpecifier [ vpi vci ] ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays a summary of the results (number of ping cells sent, number of ping cells Description received, success rate) of the ping operation.
Page 595: Show Atm Subinterface
Chapter 7: S Commands show atm subinterface show atm subinterface Syntax [ summary | atm interfaceSpecifier | summary atm interfaceSpecifier | status operatingStatus ] [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information Displays the current state of all ATM subinterfaces that you specify. Description interfaceSpecifier Particular interface;...
Page 596: Show Atm Vc
JUNOSe 11.1.x Command Reference Guide N to Z show atm vc show atm vc [ atm interfaceSpecifier ] { [ vpi vpi ] [ category categoryType ] Syntax [ status statusType ] | reserved } [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information Displays a summary of all configured ATM virtual circuits (VCs) and reserved VC Description...
Page 597: Show Atm Vc Atm
Chapter 7: S Commands show atm vc atm show atm vc { description | atm interfaceSpecifier { vcd | vpi-vci vpi vci } } [ delta ] Syntax [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information Displays OAM statistics on a VC. You can specify the circuit to display by entering Description the VCD, or by using the vpi-vci keyword and specifying the VPI and VCI.
Page 598: Show Atm Vc-Class
JUNOSe 11.1.x Command Reference Guide N to Z show atm vc-class show atm vc-class [ vcClassName [ include-defaults ] ] [ filter ] Syntax Command introduced in JUNOSe Release 7.3.0. Release Information Displays the names of all VC classes configured on the router, or, when issued with Description a VC class name, displays detailed information about the attributes configured in the specified VC class.
Page 599: Show Atm Vp
Chapter 7: S Commands show atm vp show atm vp atm interfaceSpecifier vpi [ delta ] [ filter ] Syntax Command introduced in JUNOSe Release 7.1.0. Release Information Displays detailed statistics for a specific ATM virtual path (VP) configured on the Description router.
Page 600: Show Atm Vp-Description
JUNOSe 11.1.x Command Reference Guide N to Z show atm vp-description show atm vp-description [ interfaceSpecifier [ vpi ] ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays descriptions configured for virtual paths (VPs) on an ATM interface. You Description can display all VP descriptions configured on the router, all VP descriptions configured for a particular interface, or the VP description configured for a particular VPI.
Page 601: Show Atm Vp-Tunnel
Chapter 7: S Commands show atm vp-tunnel show atm vp-tunnel [ interfaceSpecifier ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays a summary of all configured ATM virtual path tunnels. Description interfaceSpecifier Particular interface; format varies according to interface type; Options see Interface Types and Specifiers on page 5 filter See Filtering show Commands on page 4...
Page 602: Show Bandwidth Oversubscription
JUNOSe 11.1.x Command Reference Guide N to Z show bandwidth oversubscription show bandwidth oversubscription [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the bandwidth oversubscription status. Description filter See Filtering show Commands on page 4 Options Privileged Exec, User Exec Mode...
Page 603: Show Bfd Session
Chapter 7: S Commands show bfd session show bfd session [ address [ ipAddress | ipv6Address ] ] [ detail ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays Bidirectional Forwarding Detection (BFD) protocol session information. Description ipAddress IPv4 address of the session Options...
Page 604: Show Bgp Ipv6
JUNOSe 11.1.x Command Reference Guide N to Z show bgp ipv6 To display information about networks in address families other than the route-target Syntax address family: show bgp ipv6 [ unicast | multicast | vpnv6 all | vpnv6 vrf vrfName ] ipv6Prefix [ longer-prefixes ] [ fields { fieldOptions } ] [ filter ] To display information about networks in only the route-target address family: show bgp ipv6 route-target signaling { rtfPrefix [ longer-prefixes ] | rtfAddress }...
Page 605 Chapter 7: S Commands number1 Autonomous system (AS) number, in the range 1–4294967295, or an IP address number2 Unique integer, in the range 1–4294967295; 32 bits if number1 is a 16-bit AS number; 16 bits if number1 is an IP address or a 32-bit AS number prefixLength Number that specifies the length of the route prefix, in the range 32–96...
Page 606 JUNOSe 11.1.x Command Reference Guide N to Z next-hop IP address of the next router that is used when forwarding a packet to the destination network next-hop-cost Whether the indirect next hop of the route is unreachable, if not, displays IGP cost to the indirect next hop origin Origin of the route originator-id Router ID of the router in the local AS that originated the route out-label MPLS label for the route;...
Page 607: Show Bgp Ipv6 Advertised-Routes
Chapter 7: S Commands show bgp ipv6 advertised-routes To display routes advertised to a neighbor or peer group in all address families or a Syntax particular address family other than the route-target address family: show bgp ipv6 [ unicast | multicast | vpnv6 all | vpnv6 vrf vrfName ] { neighbors { ipAddress | ipv6Address } | peer-group peerGroupName } advertised-routes [ ipv6Prefix [ longer-prefixes ] ] [ fields { fieldOptions } ] [ delta ] [ filter ]...
Page 608 JUNOSe 11.1.x Command Reference Guide N to Z route-target signaling Specifies the route-target address family l2vpn Displays information for only the L2VPN address family all Optional keyword; has no effect route-target-filter neighbor Displays routes actually advertised to the specified peer group member (neighbor); which routes are advertised is determined by the application of the route-target filter received from that neighbor to routes in the peer group’s Adj-RIBs-Out table ipRtfNbrAddress IP address of a peer group member that has advertised...
Page 609 Chapter 7: S Commands next-hop-cost Whether the indirect next hop of the route is unreachable, if not, displays IGP cost to the indirect next hop origin Origin of the route originator-id Router ID of the router in the local AS that originated the route out-label MPLS label for the route;...
Page 610: Show Bgp Ipv6 Aggregate-Address
JUNOSe 11.1.x Command Reference Guide N to Z show bgp ipv6 aggregate-address show bgp ipv6 [ unicast | multicast | vpnv6 all | vpnv6 vrf vrfName ] Syntax aggregate-address [ ipv6Prefix ] [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about IPv6 BGP aggregate addresses.
Page 611: Show Bgp Ipv6 Community
Chapter 7: S Commands show bgp ipv6 community show bgp ipv6 Syntax [ unicast | multicast | vpnv6 all | vpnv6 vrf vrfName | route-target signaling ] community { communityNumber | local-as | no-advertise | no-export } [ communityNumber | local-as | no-advertise | no-export ]* [ exact-match ] [ fields { fieldOptions } ] [ filter ] Command introduced before JUNOSe Release 7.1.0.
Page 612 JUNOSe 11.1.x Command Reference Guide N to Z as-path AS path through which this route bas been advertised atomic-aggregate Whether the atomic aggregate attribute is present best Whether this is the best route for the prefix clusters List of cluster IDs through which the route has been advertised communities Community number associated with the route extended-communities Extended community imported Whether the route was imported...
Page 613: Show Bgp Ipv6 Community-List
Chapter 7: S Commands show bgp ipv6 community-list show bgp ipv6 Syntax [ unicast | multicast | vpnv6 all | vpnv6 vrf vrfName | route-target signaling ] community-list communityListName [ exact-match ] [ fields { fieldOptions } ] [ filter ] Command introduced before JUNOSe Release 7.1.0.
Page 614 JUNOSe 11.1.x Command Reference Guide N to Z extended-communities Extended community imported Whether the route was imported intro Introductory information about the state of various BGP attributes; this information is displayed only if you specify this keyword in-label MPLS label for the route; the label received with incoming MPLS frames;...
Page 615: Show Bgp Ipv6 Dampened-Paths
Chapter 7: S Commands show bgp ipv6 dampened-paths show bgp ipv6 Syntax [ unicast | multicast | vpnv6 all | vpnv6 vrf vrfName | route-target signaling ] dampened-paths [ fields { fieldOptions } ] [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information route-target signaling keywords added in JUNOSe Release 8.2.0.
Page 616 JUNOSe 11.1.x Command Reference Guide N to Z in-label MPLS label for the route; the label received with incoming MPLS frames; typically, but not always, this is the label advertised to MP-BGP peers loc-pref Local preference for the route med Multiexit discriminator for the route next-hop IP address of the next router that is used when forwarding a packet to the destination network next-hop-cost Whether the indirect next hop of the route is unreachable,...
Page 617: Show Bgp Ipv6 Filter-List
Chapter 7: S Commands show bgp ipv6 filter-list show bgp ipv6 Syntax [ unicast | multicast | vpnv6 all | vpnv6 vrf vrfName | route-target signaling ] filter-list asPathAccessListName [ fields { fieldOptions } ] [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information route-target signaling keywords added in JUNOSe Release 8.2.0.
Page 618 JUNOSe 11.1.x Command Reference Guide N to Z intro Introductory information about the state of various BGP attributes; this information is displayed only if you specify this keyword in-label MPLS label for the route; the label received with incoming MPLS frames;...
Page 619: Show Bgp Ipv6 Flap-Statistics
Chapter 7: S Commands show bgp ipv6 flap-statistics To display IPv6 BGP flap statistics for any case other than for the route-target address Syntax family: show bgp ipv6 [ unicast | multicast | vpnv6 all | vpnv6 vrf vrfName ] flap-statistics [ ipv6Prefix ] [ filter ] To display IPv6 BGP flap statistics for the route-target address family: show bgp ipv6 route-target signaling flap-statistics [ rtfPrefix | rtfAddress ] [ filter ]...
Page 620 JUNOSe 11.1.x Command Reference Guide N to Z prefixLength Number that specifies the length of the route prefix, in the range 32–96 rtfAddress rtfPrefix with a prefix length of 96; representing the route-target membership NLRI (RT-MEM-NLRI), in the format asNumber:extendedCommunity (for example, 320:320:524 or 320:50.2.3.4:524) filter See Filtering show Commands on page 4 Privileged Exec, User Exec...
Page 621: Show Bgp Ipv6 Inconsistent-As
Chapter 7: S Commands show bgp ipv6 inconsistent-as show bgp ipv6 Syntax [ unicast | multicast | vpnv6 all | vpnv6 vrf vrfName | route-target signaling ] inconsistent-as [ fields { fieldOptions } ] [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information route-target signaling keywords added in JUNOSe Release 8.2.0.
Page 622 JUNOSe 11.1.x Command Reference Guide N to Z in-label MPLS label for the route; the label received with incoming MPLS frames; typically, but not always, this is the label advertised to MP-BGP peers loc-pref Local preference for the route med Multiexit discriminator for the route next-hop IP address of the next router that is used when forwarding a packet to the destination network next-hop-cost Whether the indirect next hop of the route is unreachable,...
Page 623: Show Bgp Ipv6 Neighbors
Chapter 7: S Commands show bgp ipv6 neighbors show bgp ipv6 Syntax [ unicast | multicast | vpnv6 all | vpnv6 vrf vrfName | route-target signaling ] neighbors [ ipAddress | ipv6Address ] [ delta ] [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information ipv6Address variable added in JUNOSe Release 8.0.0.
Page 624: Show Bgp Ipv6 Neighbors Dampened-Routes
JUNOSe 11.1.x Command Reference Guide N to Z show bgp ipv6 neighbors dampened-routes show bgp ipv6 Syntax [ unicast | multicast | vpnv6 all | vpnv6 vrf vrfName | route-target signaling ] neighbors { ipAddress | ipv6Address } dampened-routes [ fields { fieldOptions } ] [ delta ] [ filter ] Command introduced before JUNOSe Release 7.1.0.
Page 625 Chapter 7: S Commands extended-communities Extended community imported Whether the route was imported intro Introductory information about the state of various BGP attributes; this information is displayed only if you specify this keyword in-label MPLS label for the route; the label received with incoming MPLS frames;...
Page 626: Show Bgp Ipv6 Neighbors Paths
JUNOSe 11.1.x Command Reference Guide N to Z show bgp ipv6 neighbors paths show bgp ipv6 Syntax [ unicast | multicast | vpnv6 all | vpnv6 vrf vrfName | route-target signaling ] neighbors { ipAddress | ipv6Address } paths [ pathExpression ] [ filter ] Command introduced before JUNOSe Release 7.1.0.
Page 627: Show Bgp Ipv6 Neighbors Received-Routes
Chapter 7: S Commands show bgp ipv6 neighbors received-routes show bgp ipv6 Syntax [ unicast | multicast | vpnv6 all | vpnv6 vrf vrfName | route-target signaling ] neighbors { ipAddress | ipv6Address } received-routes [ fields { fieldOptions } ] [ delta ] [ filter ] Command introduced before JUNOSe Release 7.1.0.
Page 628 JUNOSe 11.1.x Command Reference Guide N to Z extended-communities Extended community imported Whether the route was imported intro Introductory information about the state of various BGP attributes; this information is displayed only if you specify this keyword in-label MPLS label for the route; the label received with incoming MPLS frames;...
Page 629: Show Bgp Ipv6 Neighbors Routes
Chapter 7: S Commands show bgp ipv6 neighbors routes show bgp ipv6 Syntax [ unicast | multicast | vpnv6 all | vpnv6 vrf vrfName | route-target signaling ] neighbors { ipAddress | ipv6Address } routes [ fields { fieldOptions } ] [ delta ] [ filter ] Command introduced before JUNOSe Release 7.1.0.
Page 630 JUNOSe 11.1.x Command Reference Guide N to Z extended-communities Extended community imported Whether the route was imported intro Introductory information about the state of various BGP attributes; this information is displayed only if you specify this keyword in-label MPLS label for the route; the label received with incoming MPLS frames;...
Page 631: Show Bgp Ipv6 Network
Chapter 7: S Commands show bgp ipv6 network To display information about a prefix configured for all address families or for a Syntax specific address family other than the route-target address family: show bgp ipv6 [ unicast | multicast | vpnv6 all | vpnv6 vrf vrfName ] network [ ipv6Prefix ] [ filter ] To display information about about a prefix configured for the route-target address family:...
Page 632 JUNOSe 11.1.x Command Reference Guide N to Z prefixLength Number that specifies the length of the route prefix, in the range 32–96 filter See Filtering show Commands on page 4 Privileged Exec, User Exec Mode show bgp ipv6 network...
Page 633: Show Bgp Ipv6 Next-Hops
Chapter 7: S Commands show bgp ipv6 next-hops show bgp ipv6 Syntax [ unicast | multicast | vpnv6 all | vpnv6 vrf vrfName | route-target signaling ] next-hops [ ipv6Address ] [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information route-target signaling keywords added in JUNOSe Release 8.2.0.
Page 634: Show Bgp Ipv6 Paths
JUNOSe 11.1.x Command Reference Guide N to Z show bgp ipv6 paths show bgp ipv6 Syntax [ unicast | multicast | vpnv6 all | vpnv6 vrf vrfName | route-target signaling ] paths [ pathExpression ] [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information route-target signaling keywords added in JUNOSe Release 8.2.0.
Page 635: Show Bgp Ipv6 Peer-Group
Chapter 7: S Commands show bgp ipv6 peer-group show bgp ipv6 Syntax [ unicast | multicast | vpnv6 all | vpnv6 vrf vrfName | route-target signaling ] peer-group [ peerGroupName ] [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information route-target signaling keywords added in JUNOSe Release 8.2.0.
Page 636: Show Bgp Ipv6 Quote-Regexp
JUNOSe 11.1.x Command Reference Guide N to Z show bgp ipv6 quote-regexp show bgp ipv6 Syntax [ unicast | multicast | vpnv6 all | vpnv6 vrf vrfName | route-target signaling ] quote-regexp pathExpression [ fields { fieldOptions } ] [ filter ] Command introduced before JUNOSe Release 7.1.0.
Page 637 Chapter 7: S Commands communities Community number associated with the route extended-communities Extended community imported Whether the route was imported intro Introductory information about the state of various BGP attributes; this information is displayed only if you specify this keyword in-label MPLS label for the route;...
Page 638: Show Bgp Ipv6 Regexp
JUNOSe 11.1.x Command Reference Guide N to Z show bgp ipv6 regexp show bgp ipv6 Syntax [ unicast | multicast | vpnv6 all | vpnv6 vrf vrfName | route-target signaling ] regexp pathExpression [ fields { fieldOptions } ] [ filter ] Command introduced before JUNOSe Release 7.1.0.
Page 639 Chapter 7: S Commands communities Community number associated with the route extended-communities Extended community imported Whether the route was imported intro Introductory information about the state of various BGP attributes; this information is displayed only if you specify this keyword in-label MPLS label for the route;...
Page 640: Show Bgp Ipv6 Summary
JUNOSe 11.1.x Command Reference Guide N to Z show bgp ipv6 summary show bgp ipv6 Syntax [ unicast | multicast | vpnv6 all | vpnv6 vrf vrfName | route-target signaling ] summary [ fields { fieldOptions } ] [ delta ] [ filter ] Command introduced before JUNOSe Release 7.1.0.
Page 641 Chapter 7: S Commands rib-version Last RIB version queued to be sent to this peer send-queue-length Number of messages queued to be sent to this peer state State of the BGP session times-up Number of times the session has been established up-down-time How long the session has been up or down updates-received Number of update messages received from the peer updates-sent Number of update messages sent to the peer...
Page 642: Show Boot
JUNOSe 11.1.x Command Reference Guide N to Z show boot show boot [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the configuration and router settings that are used at startup. Description filter See Filtering show Commands on page 4 Options Privileged Exec, User Exec Mode...
Page 643: Show Bridge1483 Interface
Chapter 7: S Commands show bridge1483 interface show bridge1483 interface [ atm interfaceSpecifier ] [ filter ] Syntax To display summary information: show bridge1483 interface summary Command introduced before JUNOSe Release 7.1.0. Release Information atm keyword and interfaceSpecifier variable added in JUNOSe Release 7.2.0. Displays configuration and status information for all bridged Ethernet interfaces Description currently configured on the router.
Page 644: Show Bridge
JUNOSe 11.1.x Command Reference Guide N to Z show bridge show bridge { bridgeGroupName | vplsName } [ all [ delta ] ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information vplsName variable added in JUNOSe Release 7.1.0. Displays configuration and statistics information for the specified bridge group or Description VPLS instance.
Page 645: Show Bridge Groups
Chapter 7: S Commands show bridge groups show bridge groups [ details ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays configuration information for all bridge groups and VPLS instances currently Description configured on the router. details Displays configuration settings for each bridge group or VPLS instance Options on the router;...
Page 646: Show Bridge Interface
JUNOSe 11.1.x Command Reference Guide N to Z show bridge interface To display information about a specified network interface that belongs to a bridge Syntax group or to a VPLS instance: show bridge interface interfaceType interfaceSpecifier [ delta ] [ filter ] To display information about all interfaces that belong to a bridge group or to a VPLS instance, including the VPLS virtual core interface for a VPLS instance: show bridge { bridgeGroupName | vplsName } interface [ brief | delta ] [ filter ]...
Page 647 Chapter 7: S Commands Privileged Exec, User Exec Mode Monitoring Configuration, Statistics, and Status for VPLS Network Interfaces in the Related Topics JUNOSe BGP and MPLS Configuration Guide show bridge interface...
Page 648: Show Bridge Interface Vpls
JUNOSe 11.1.x Command Reference Guide N to Z show bridge interface vpls show bridge interface vpls vplsName [ delta ] [ filter ] Syntax Command introduced in JUNOSe Release 7.1.0. Release Information Displays configuration, statistics, and status information for a VPLS instance on the Description VPLS virtual core interface, which represents all the MPLS tunnels from the router to the remote VPLS edge (VE) devices.
Page 649: Show Bridge Port
Chapter 7: S Commands show bridge port show bridge { bridgeGroupName | vplsName } port [ portNumber ] [ brief | delta ] [ Syntax filter ] Command introduced before JUNOSe Release 7.1.0. Release Information vplsName variable added in JUNOSe Release 7.1.0. Displays configuration, statistics, and status information for ports (interfaces) Description associated with a bridge group or VPLS instance.
Page 650: Show Bridge Table
JUNOSe 11.1.x Command Reference Guide N to Z show bridge table show bridge { bridgeGroupName | vplsName } table [ static | dynamic ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information vplsName variable added in JUNOSe Release 7.1.0. Displays information about the entries in the MAC address table for the specified Description bridge group or VPLS instance.
Page 651: Show Bulkstats
Chapter 7: S Commands show bulkstats show bulkstats [ brief ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays bulkstats statistical information. Description brief Displays a brief description for each collector type Options filter See Filtering show Commands on page 4 Privileged Exec, User Exec Mode show bulkstats...
Page 652: Show Bulkstats Collector Description
JUNOSe 11.1.x Command Reference Guide N to Z show bulkstats collector description show bulkstats collector description [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the collector’s file description. Description filter See Filtering show Commands on page 4 Options Privileged Exec, User Exec Mode...
Page 653: Show Bulkstats Collector Interval
Chapter 7: S Commands show bulkstats collector interval show bulkstats collector interval [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the time for which the router transfers data to the receivers. Description filter See Filtering show Commands on page 4 Options Privileged Exec, User Exec Mode...
Page 654: Show Bulkstats Collector Max-Size
JUNOSe 11.1.x Command Reference Guide N to Z show bulkstats collector max-size show bulkstats collector max-size [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the maximum size of the bulkstats file. Description filter See Filtering show Commands on page 4 Options Privileged Exec, User Exec Mode...
Page 655: Show Bulkstats Collector Transfer-Mode
Chapter 7: S Commands show bulkstats collector transfer-mode show bulkstats collector transfer-mode [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the way in which the router transfers data to the receivers. Description filter See Filtering show Commands on page 4 Options Privileged Exec, User Exec Mode...
Page 656: Show Bulkstats Interface-Type
JUNOSe 11.1.x Command Reference Guide N to Z show bulkstats interface-type show bulkstats interface-type [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about the collection of statistical data for the particular interface Description type (for example, ATM). filter See Filtering show Commands on page 4 Options Privileged Exec, User Exec...
Page 657: Show Bulkstats Receiver
Chapter 7: S Commands show bulkstats receiver show bulkstats receiver [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the configuration of the receiver’s remote files. Description filter See Filtering show Commands on page 4 Options Privileged Exec, User Exec Mode show bulkstats receiver...
Page 658: Show Bulkstats Schema
JUNOSe 11.1.x Command Reference Guide N to Z show bulkstats schema show bulkstats schema [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays data on the selected schema. Description filter if-stack or if-stats; see Filtering show Commands on page 4 Options Privileged Exec, User Exec Mode...
Page 659: Show Bulkstats Statistics
Chapter 7: S Commands show bulkstats statistics show bulkstats statistics [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about statistics counters. Description filter See Filtering show Commands on page 4 Options Privileged Exec, User Exec Mode show bulkstats statistics...
Page 660: Show Bulkstats Traps
JUNOSe 11.1.x Command Reference Guide N to Z show bulkstats traps show bulkstats traps [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about bulkstats traps. Description filter See Filtering show Commands on page 4 Options Privileged Exec, User Exec Mode...
Page 661: Show Bulkstats Virtual-Routers
Chapter 7: S Commands show bulkstats virtual-routers show bulkstats virtual-routers Syntax Command introduced in JUNOSe Release 7.1.0. Release Information Displays information about bulkstats router groups. Description Privileged Exec, User Exec Mode show bulkstats virtual-routers...
Page 662: Show Cac
JUNOSe 11.1.x Command Reference Guide N to Z show cac show cac [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays global call admission control configuration. Description filter See Filtering show Commands on page 4 Options Privileged Exec, User Exec Mode show cac...
Page 663: Show Cac Interface
Chapter 7: S Commands show cac interface show cac interface [ brief | interfaceType interfaceSpecifier ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays all interfaces on which TE bandwidth accounting is configured, or information Description only for the specified interface.
Page 664: Show Classifier-List
JUNOSe 11.1.x Command Reference Guide N to Z show classifier-list show classifier-list [ classifierName [ classifierNumber ] ] [ brief | detailed ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about classifier control lists. Description classifierName Name of classifier control list Options...
Page 665: Show Clns
Chapter 7: S Commands show clns show clns [ es-neighbors | is-neighbors ] [ interfaceType interfaceSpecifier ] Syntax [ detail ] [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about the CLNS network. Description es-neighbors Displays IS-IS related information for IS-IS end-system adjacencies. Options Neighbor entries are sorted according to the area in which they are located.
Page 666: Show Clns Interface
JUNOSe 11.1.x Command Reference Guide N to Z show clns interface show clns interface [ interfaceType interfaceSpecifier ] [ brief ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information brief keyword added in JUNOSe Release 8.0.0. Lists the Connectionless Network Service information about each interface.
Page 667: Show Clns Neighbors
Chapter 7: S Commands show clns neighbors show clns neighbors [ interfaceType interfaceSpecifier ] [ detail ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays both ES and IS neighbors. Description interfaceType Interface type; see Interface Types and Specifiers on page 5 Options interfaceSpecifier Particular interface;...
Page 668: Show Clns Protocol
JUNOSe 11.1.x Command Reference Guide N to Z show clns protocol show clns protocol [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Lists the protocol-specific information for each IS-IS routing process in the router. Description filter See Filtering show Commands on page 4 Options Privileged Exec, User Exec Mode...
Page 669: Show Clns Traffic
Chapter 7: S Commands show clns traffic show clns traffic [ interfaceType interfaceSpecifier ] [ detail ] [ delta ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays IS-IS protocol statistics globally for the router or for only a specified interface. Description interfaceType Interface type;...
Page 670: Show Clock
JUNOSe 11.1.x Command Reference Guide N to Z show clock show clock [ detail ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the router’s clock source. Description detail Provides expanded information about the clock settings, rather than a Options summary filter See Filtering show Commands on page 4...
Page 671: Show Color-Mark-Profile
Chapter 7: S Commands show color-mark-profile show color-mark-profile [ filter ] Syntax colorMarkProfileName Command introduced in JUNOSe Release 7.2.0. Release Information Displays color mark profile entries. Description colorMarkProfileName Name of the color mark profile Options filter See Filtering show Commands on page 4 Privileged Exec, User Exec Mode Monitoring Color-Mark Profiles...
Page 672: Show Columns
JUNOSe 11.1.x Command Reference Guide N to Z show columns show columns Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays configuration information of bridged Ethernet over ATM, IP over ATM, PPP, Description or PPPoE static and dynamic interface columns. It is designed to categorize interface subscribers into PPP, PPPoE, bridged, or routed.
Page 673: Show Configuration
Chapter 7: S Commands show configuration show configuration [ interface interfaceType interfaceSpecifier ] | Syntax [ category categoryName [ categoryName ]* ] [ virtual-router routerName ] [ [ exclude-category interface interfaceType ]* ] [ include-defaults ] [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information Displays the current (running) configuration of the router, a specified virtual router, Description...
Page 674: Show Control-Plane Policer
JUNOSe 11.1.x Command Reference Guide N to Z show control-plane policer show control-plane policer protocol protocolValue Syntax Command introduced in JUNOSe Release 8.0.0. Release Information Displays control plane information for a specified protocol or for all protocols. Description protocolValue Name of the protocol Options Privileged Exec, User Exec Mode...
Page 675: Show Controllers E3
Chapter 7: S Commands show controllers e3 show controllers e3 [ brief | { interfaceSpecifier [ brief | all | summary ] | Syntax serial [ interfaceSpecifier ] } ] [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about E3 controller interfaces.
Page 676: Show Controllers Sonet
JUNOSe 11.1.x Command Reference Guide N to Z show controllers sonet show controllers sonet { [ brief ] | interfaceSpecifier [ :controllerSpecifier ] Syntax { [ configuration ] | layerType [ interval | total [ delta ] ] | controllerType [ interval ] | all [ total [ delta ] ] } } [ filter ] Command introduced before JUNOSe Release 7.1.0.
Page 677 Chapter 7: S Commands configuration Displays the configuration of each controller at the specified level and above layerType Type of SONET/SDH layer section Section layer of an interface line Line layer of an interface path SONET or SDH path interval Number of 15-minute intervals over which the router monitors information;...
Page 678: Show Controllers Sonet Remote
JUNOSe 11.1.x Command Reference Guide N to Z show controllers sonet remote show controllers sonet { interfaceSpecifier [ :controllerSpecifier ] remote [ all ] } Syntax [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about the statistics on the remote device when MDL is configured Description on a T3 over channelized SONET interface or FDL is configured on either a T1 channel on a T3 over channelized SONET interface or a T1 over SONET/SDH interface.
Page 679 Chapter 7: S Commands Privileged Exec, User Exec Mode show controllers sonet remote...
Page 680: Show Controllers T1
JUNOSe 11.1.x Command Reference Guide N to Z show controllers t1 show controllers t1 [ brief | { { fractional | serial } [ interfaceSpecifier ] | Syntax interfaceSpecifier [ brief | all | summary ] } ] [ filter ] Command introduced before JUNOSe Release 7.1.0.
Page 681: Show Controllers T3
Chapter 7: S Commands show controllers t3 show controllers t3 [ brief | { interfaceSpecifier [ brief | all | summary ] | Syntax { ft1 | serial } [ interfaceSpecifier ] } ] [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about the T3 controller interfaces.
Page 682: Show Controllers T3 Remote
JUNOSe 11.1.x Command Reference Guide N to Z show controllers t3 remote show controllers t3 interfaceSpecifier remote [ all ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about the statistics on the remote device when MDL is configured Description on a T3 interface or FDL is configured on a T1 channel.
Page 683: Show Cops Info
Chapter 7: S Commands show cops info show cops info [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about SRC (formerly SDX) sessions and about the COPS layer Description created for SRC sessions. filter See Filtering show Commands on page 4 Options Privileged Exec, User Exec Mode...
Page 684: Show Cops Statistics
JUNOSe 11.1.x Command Reference Guide N to Z show cops statistics show cops statistics [ delta ] [ filter ] Syntax Command introduced in JUNOSe Release 7.1.0. Release Information Displays statistics about SRC (formerly SDX) sessions. Description delta Displays baselined statistics Options filter See Filtering show Commands on page 4 Privileged Exec, User Exec...
Page 685: Show Dhcp Binding
Chapter 7: S Commands show dhcp binding To display information for the specified binding ID: Syntax show dhcp binding bindingId To display information for DHCP client bindings on the specified subnet: show dhcp binding [ local | external | relay-proxy ] [ subnetAddress ] [ detail ] [ filter To display information for DHCP client bindings for the specified IP prefix: show dhcp binding [ local | external | relay-proxy ] [ subnetAddress ] ip-prefix ipPrefix [ detail ] [ filter ]...
Page 686 JUNOSe 11.1.x Command Reference Guide N to Z NOTE: This command replaces the deprecated show ip dhcp-external binding, show ip dhcp-external binding-id, and show ip dhcp-local binding commands, which may be removed completely in a future release. bindingId DHCP binding ID for a specific client Options local Specifies DHCP local server client bindings that meet the display criteria external Specifies DHCP external server client bindings that meet the display...
Page 687 Chapter 7: S Commands _ (underscore) Matches a ^, a $, a comma, a space, a {, or a }. Placed on either side of a string to specify a literal and disallow substring matching. Numerals enclosed by underscores can be preceded or followed by any of the characters listed above | Matches characters on either side of the metacharacter;...
Page 688: Show Dhcp Count
JUNOSe 11.1.x Command Reference Guide N to Z show dhcp count To display counts of DHCP client bindings and interfaces on the specified subnet: Syntax show dhcp count [ local | external | relay-proxy ] [ subnetAddress ] [ filter ] To display counts of DHCP client bindings and interfaces for the specified IP prefix: show dhcp count [ local | external | relay-proxy ] [ subnetAddress ] ip-prefix ipPrefix [ filter ]...
Page 689 Chapter 7: S Commands ipPrefix IP prefix (address and subnetwork mask) of the DHCP clients; for example, 10.10.10.0/24 no-interface Specifies DHCP clients without a lower-layer interface; use this keyword to display count information for DHCP client bindings configured over dynamic interfaces for which the lower-layer interface has been shut down filter See Filtering show Commands on page 4 string Regular expression string that represents the interface, circuit ID, or remote ID to be matched;...
Page 690 JUNOSe 11.1.x Command Reference Guide N to Z To represent the binary sequence 0d 0a (hex), use the string '\\r\\n'. This consists of four ASCII characters: 5c for \\, 72 for r, 5c for \\, and 6e for n. For example, to match the sequence 74 65 73 74 0d 0a 6f 6e 65 (hex), use the string 'test\\r\\none'.
Page 691: Show Dhcp-External
Chapter 7: S Commands show dhcp-external show dhcp-external Syntax Command introduced in JUNOSe Release 9.3.0. Release Information Displays global configuration information for the DHCP external server application. Description Currently, this command indicates whether the ability to use a combination of the MAC address and giaddr to uniquely identify DHCP clients with duplicate MAC addresses is enabled or disabled for the DHCP external server application.
Page 692: Show Dhcp Host
JUNOSe 11.1.x Command Reference Guide N to Z show dhcp host To display information for DHCP client bindings on the specified subnet: Syntax show dhcp host [ local | external | relay-proxy ] [ subnetAddress ] [ detail ] [ filter ] To display information for DHCP client bindings for the specified IP prefix: show dhcp host [ local | external | relay-proxy ] [ subnetAddress ] ip-prefix ipPrefix [ detail ] [ filter ]...
Page 693 Chapter 7: S Commands ipPrefix IP prefix (address and subnetwork mask) of the DHCP clients; for example, 10.10.10.0/24 no-interface Specifies DHCP clients without a lower-layer interface; use this keyword to display information for DHCP client bindings configured over dynamic interfaces for which the lower-layer interface has been shut down detail Shows detailed information for the specified DHCP bindings filter See Filtering show Commands on page 4 string Regular expression string that represents the interface, circuit ID, or...
Page 694 JUNOSe 11.1.x Command Reference Guide N to Z To represent the binary sequence 0d 0a (hex), use the string '\\r\\n'. This consists of four ASCII characters: 5c for \\, 72 for r, 5c for \\, and 6e for n. For example, to match the sequence 74 65 73 74 0d 0a 6f 6e 65 (hex), use the string 'test\\r\\none'.
Page 695: Show Dhcp Relay
Chapter 7: S Commands show dhcp relay show dhcp relay [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays DHCP relay configuration information and IP addresses of configured DHCP Description servers. filter See Filtering show Commands on page 4 Options Privileged Exec Mode...
Page 696: Show Dhcp Relay Proxy Statistics
JUNOSe 11.1.x Command Reference Guide N to Z show dhcp relay proxy statistics show dhcp relay proxy statistics [ delta ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the statistics of the configured DHCP relay proxy. Description delta Displays baselined statistics Options...
Page 697: Show Dhcp Relay Statistics
Chapter 7: S Commands show dhcp relay statistics show dhcp relay statistics [ detail ] [ delta ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information detail keyword added in JUNOSe Release 7.2.0. Displays statistics that are common to both DHCP relay and DHCP relay proxy, and Description also to display DHCP server statistics for DHCP relay only.
Page 698: Show Dhcp Server
JUNOSe 11.1.x Command Reference Guide N to Z show dhcp server show dhcp server [ statistics [ delta ] ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the IP address(es) and statistics of the configured DHCP server. Description server DHCP Proxy Client configuration Options...
Page 699: Show Dhcp Summary
Chapter 7: S Commands show dhcp summary show dhcp summary Syntax Command introduced in JUNOSe Release 8.2.0. Release Information Displays the currently configured DHCP applications and indicates whether they are Description active. Privileged Exec Mode Monitoring Status of DHCP Applications Related Topics show dhcp summary...
Page 700: Show Dhcp Vendor-Option
JUNOSe 11.1.x Command Reference Guide N to Z show dhcp vendor-option show dhcp vendor-option [ default | vendor-option-relay-server ServerAddress ] Syntax Command introduced in JUNOSe Release 8.2.0. Release Information Displays configuration and action information for the DHCP vendor-option feature. Description default Displays where DHCP client packets that do not match a configured Options vendor-string are sent by default...
Page 701: Show Dos-Protection-Group
Chapter 7: S Commands show dos-protection-group show dos-protection-group groupName rates slot slotNumber [ filter ] ] Syntax Command introduced in JUNOSe Release 8.1.0. Release Information Displays information about denial of service (DoS) protection groups. Description groupName Name of the DoS protection group Options rate Calculated values for the minimum rate, maximum rate, minimum burst, and maximum burst...
Page 702: Show Drop-Profile
JUNOSe 11.1.x Command Reference Guide N to Z show drop-profile show drop-profile [ dropProfileName ] [ brief | references ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about the drop profile. Description dropProfileName Name for the drop profile Options brief Displays information in a condensed format...
Page 703: Show Dvmrp Destination Profile
Chapter 7: S Commands show dvmrp destination profile show dvmrp destination profile [ profileName ] Syntax Command introduced in JUNOSe Release 8.2.0. Release Information Displays the configuration and status of a destination profile for dynamic DVMRP Description tunnels. profileName Name of the destination profile Options Privileged Exec Mode...
Page 704: Show Dvmrp Tunnel
JUNOSe 11.1.x Command Reference Guide N to Z show dvmrp tunnel show dvmrp tunnel [ detail ] [ state tunnelStatus ] [ tunnelName | Syntax [ virtual-router vrName ] ip ipAddress [ tunnelName ] ] [ filter ] To display summary information: show dvmrp tunnel summary [ filter ] Command introduced before JUNOSe Release 7.1.0.
Page 705: Show Egress-Queue Events
Chapter 7: S Commands show egress-queue events show egress-queue events { interface interfaceType interfaceSpecifier | Syntax l2tp session sessionName | tunnel-server interfaceType } [ atmVpi | s-vlanIdValue ] [ explicit | summary ] [ traffic-class trafficClassName ] [ event-exceeding eventExceedingNumber { committed | conformed | exceeded | forwarded } ] [ filter ] Command introduced before JUNOSe Release 7.1.0.
Page 706: Show Egress-Queue Rates
JUNOSe 11.1.x Command Reference Guide N to Z show egress-queue rates show egress-queue rates [ color ] [ previous | current ] [ full | brief ] Syntax { interface interfaceType interfaceSpecifier | l2tp session sessionName | tunnel-server interfaceType } [ atmVpi | s-vlanIdValue ] [ explicit | summary ] [ traffic-class trafficClassName ] [ rate-exceeding rateExceedingNumber { aggregate | committed | conformed | exceeded | forwarded | minimum | maximum } ] [ filter ]...
Page 707 Chapter 7: S Commands exceeded Displays queues in which the exceeded drop rate exceeds the rateExceedingNumber forwarded Displays queues in which the forwarding rate exceeds the rateExceedingNumber minimum Displays queues in which the minimum queue rate exceeds the rateExceedingNumber maximum Displays queues in which the maximum queue rate exceeds the rateExceedingNumber filter See Filtering show Commands on page 4 Privileged Exec, User Exec...
Page 708: Show Environment
JUNOSe 11.1.x Command Reference Guide N to Z show environment show environment [ all ] [ table ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about the router’s physical environment, such as power and Description temperature.
Page 709: Show Ethernet Oam Lfm Discovery
Chapter 7: S Commands show ethernet oam lfm discovery show ethernet oam lfm discovery interfaceType interfaceSpecifier Syntax Command introduced in JUNOSe Release 11.1.0. Release Information Displays the results of the Ethernet OAM link-fault management discovery process Description for a particular interface. interfaceType One of the following interface types listed in “Interface Types Options and Specifiers”...
Page 710: Show Ethernet Oam Lfm Statistics
JUNOSe 11.1.x Command Reference Guide N to Z show ethernet oam lfm statistics show ethernet oam lfm statistics interfaceType interfaceSpecifier Syntax Command introduced in JUNOSe Release 11.1.0. Release Information Displays detailed information about the Ethernet OAM link-fault management packets Description that are processed by a particular interface.
Page 711: Show Ethernet Oam Lfm Status
Chapter 7: S Commands show ethernet oam lfm status show ethernet oam lfm status interfaceType interfaceSpecifier Syntax Command introduced in JUNOSe Release 11.1.0. Release Information Displays the current Ethernet OAM link-fault management configuration for a Description particular interface. OAM must be operational on the interface when you run this command.
Page 712: Show Ethernet Oam Lfm Summary
JUNOSe 11.1.x Command Reference Guide N to Z show ethernet oam lfm summary show ethernet oam lfm summary Syntax Command introduced in JUNOSe Release 11.1.0. Release Information Displays a summary of the MAC-layer OAM status of all Ethernet links on which OAM Description link-fault management is enabled.
Page 713: Show Exception Dump
Chapter 7: S Commands show exception dump show exception dump [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the parameters for transferring core dump files. Description filter See Filtering show Commands on page 4 Options Privileged Exec Mode show exception dump...
Page 714: Show Exception Monitor
JUNOSe 11.1.x Command Reference Guide N to Z show exception monitor show exception monitor [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about core dump monitor status and configuration. Description filter See Filtering show Commands on page 4 Options Privileged Exec Mode...
Page 715: Show Fabric-Queue
Chapter 7: S Commands show fabric-queue show fabric-queue [ traffic-class trafficClassName [ detail ] | Syntax egress-slot egressSlotNumber | detail | traffic-class trafficClassName egress-slot egressSlotNumber ] [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information Displays forwarded and dropped statistics for the queues in the fabric. Description trafficClassName Name of the traffic class Options...
Page 716: Show Fabric Weights
JUNOSe 11.1.x Command Reference Guide N to Z show fabric weights show fabric weights Syntax Command introduced in JUNOSe Release 7.2.0. Release Information Displays the multicast-to-unicast ratio for the router switch fabric. Description Privileged Exec, User Exec Mode show fabric weights...
Page 717: Show Flash
Chapter 7: S Commands show flash show flash Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about installed flash cards. Description Privileged Exec, User Exec Mode show flash...
Page 718: Show Forwarding-Table Route-Holddown
JUNOSe 11.1.x Command Reference Guide N to Z show forwarding-table route-holddown show forwarding-table route-holddown Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the configured route hold-down time (in seconds) that is allowed after an Description initial routing table change for the accumulation and subsequent distribution of a set of routing table updates to the line modules.
Page 719: Show Frame-Relay Interface
Chapter 7: S Commands show frame-relay interface show frame-relay interface [ interfaceType interfaceSpecifier ] [ members ] Syntax [ brief ] [ delta ] [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information Displays Frame Relay statistics for interfaces. Description interfaceType One of the following interface types listed in Interface Types and Options...
Page 720: Show Frame-Relay Lip
JUNOSe 11.1.x Command Reference Guide N to Z show frame-relay lip show frame-relay lip [ interface interfaceType interfaceSpecifier ] [ brief ] [ delta ] Syntax [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information Displays Link Integrity Protocol state and statistics for a link in an MLFR bundle. Description interfaceType One of the following interface types listed in “Interface Types Options...
Page 721: Show Frame-Relay Lmi
Chapter 7: S Commands show frame-relay lmi show frame-relay lmi [ interface interfaceType interfaceSpecifier ] [ brief ] Syntax [ delta ] [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information Displays state and statistics for the local management interface. Description interfaceType One of the following interface types listed in Interface Types and Options...
Page 722: Show Frame-Relay Map
JUNOSe 11.1.x Command Reference Guide N to Z show frame-relay map show frame-relay map [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the current Frame Relay map entries and information about the Frame Description Relay connections. filter See Filtering show Commands on page 4 Options Privileged Exec, User Exec...
Page 723: Show Frame-Relay Multilinkinterface
Chapter 7: S Commands show frame-relay multilinkInterface show frame-relay multilinkInterface [ interfaceType interfaceSpecifier ] [ brief ] Syntax [ delta ] [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information Displays statistics about all MLFR interfaces or the specified MLFR interfaces. Description interfaceType One of the following interface types listed in “Interface Types Options...
Page 724: Show Frame-Relay Pvc
JUNOSe 11.1.x Command Reference Guide N to Z show frame-relay pvc show frame-relay pvc [ dlci | interface interfaceType interfaceSpecifier ] Syntax [ brief ] [ delta ] [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information Displays permanent virtual circuit statistics for Frame Relay or MLFR interfaces. Description dlci DLCI number to be used on the specified subinterface to identify a virtual Options...
Page 725: Show Frame-Relay Subinterface
Chapter 7: S Commands show frame-relay subinterface show frame-relay subinterface [ interfaceType interfaceSpecifier ] [ brief ] Syntax [ delta ] [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information Displays statistics about Frame Relay subinterfaces. Description interfaceType One of the following interface types listed in “Interface Types Options and Specifiers”...
Page 726: Show Frame-Relay Summary
JUNOSe 11.1.x Command Reference Guide N to Z show frame-relay summary show frame-relay summary [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Scans all defined Frame Relay interfaces and circuits and reports aggregate status Description counts. filter See Filtering show Commands on page 4 Options Privileged Exec, User Exec...
Page 727: Show Ftp-Server
Chapter 7: S Commands show ftp-server show ftp-server Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about the FTP server. Description Privileged Exec Mode show ftp-server...
Page 728: Show Gre Destination Profile
JUNOSe 11.1.x Command Reference Guide N to Z show gre destination profile show gre destination profile [ profileName ] Syntax Command introduced in JUNOSe Release 8.2.0. Release Information Displays the configuration and status of a destination profile for dynamic GRE tunnels. Description profileName Name of the destination profile Options...
Page 729: Show Gre Tunnel
Chapter 7: S Commands show gre tunnel show gre tunnel [ detail ] [ state tunnelStatus ] Syntax [ tunnelName | [ virtual-router vrName ] ip ipAddress ] [ filter ] [ summary ] To display summary information: show gre tunnel summary [ filter ] Command introduced before JUNOSe Release 7.1.0.
Page 730: Show Hardware
JUNOSe 11.1.x Command Reference Guide N to Z show hardware show hardware [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about the modules installed in the router. Description filter See Filtering show Commands on page 4 Options Privileged Exec Mode...
Page 731: Show Hdlc Interface
Chapter 7: S Commands show hdlc interface show hdlc interface [ { dataRestriction [ dataRestriction ]* } | full ] Syntax [ delta ] [ stateRestriction ] [ { interfaceType } interfaceSpecifier ] [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information Displays statistics about specified Cisco HDLC interfaces.
Page 732: Show Hosts
JUNOSe 11.1.x Command Reference Guide N to Z show hosts show hosts [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays a list of configured network servers. Description filter See Filtering show Commands on page 4 Options Privileged Exec Mode...
Page 733: Show Hotfix
Chapter 7: S Commands show hotfix show hotfix [ hfixFileName ] [ detail ] Syntax Command introduced in JUNOSe Release 7.2.0. Release Information Displays information for any hotfix available on the local file system. The information Description includes name and ID of the hotfix, activation and arming status, and any other required hotfixes.
Page 734: Show Icr-Partition
JUNOSe 11.1.x Command Reference Guide N to Z show icr-partition show icr-partition [ interfaceType interfaceSpecifier [ vrid ] ] [ filter ] Syntax Command introduced in JUNOSe Release 10.3.0. Release Information Displays ICR partition information for the VRID configured on the specified interface. Description interfaceType One of the following interface types listed in Interface Types and Options...
Page 735: Show Icr-Partitions
Chapter 7: S Commands show icr-partitions show icr-partitions [ backup | dormant | master | summary ] [ filter ] Syntax Command introduced in JUNOSe Release 10.3.0. Release Information Displays a list of all configured ICR partitions in different states, and a summary of Description all configured ICR partitions on the router.
Page 736: Show Ike Certificates
JUNOSe 11.1.x Command Reference Guide N to Z show ike certificates show ike certificates { all | crl | peer | public-certs | root-cas } [ hex-format ] Syntax [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information Displays the IKE certificates configured on the E Series router.
Page 737: Show Ike Configuration
Chapter 7: S Commands show ike configuration show ike configuration [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays a summary of the IKE configuration. Description NOTE: This command has been replaced by the show ipsec ike-configuration command and may be removed completely in a future release.
Page 738: Show Ike Identity
JUNOSe 11.1.x Command Reference Guide N to Z show ike identity show ike identity [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the IKE identity configuration. Description NOTE: This command has been replaced by the show ipsec identity command and may be removed completely in a future release.
Page 739: Show Ike Policy-Rule
Chapter 7: S Commands show ike policy-rule show ike policy-rule [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays configuration of IKE phase 1 policy rules. Description NOTE: This command has been replaced by the show ipsec ike-policy-rule command and may be removed completely in a future release.
Page 740: Show Ike Sa
JUNOSe 11.1.x Command Reference Guide N to Z show ike sa show ike sa [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays IKE phase 1 SAs running on the router. Description NOTE: This command has been replaced by the show ipsec ike-sa command and may be removed completely in a future release.
Page 741: Show Interfaces
Chapter 7: S Commands show interfaces show interfaces interfaceType interfaceSpecifier [ delta ] [ brief ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the current state of the interface you specify. Description interfaceType Interface type; see Interface Types and Specifiers on page 5 Options interfaceSpecifier Particular interface;...
Page 742: Show Interfaces Lag
JUNOSe 11.1.x Command Reference Guide N to Z show interfaces lag show interfaces interfaceType interfaceSpecifier lag [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about a specified Ethernet member link in an IEEE 802.3ad Description link aggregation group (LAG) bundle.
Page 743: Show Interfaces Lag Members
Chapter 7: S Commands show interfaces lag members show interfaces lag [ interfaceSpecifier ] members [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about the Ethernet member links in all IEEE 802.3ad link Description aggregation group (LAG) bundles configured on the router, or about the member links in a specified IEEE 802.3ad LAG bundle.
Page 744: Show Ip
JUNOSe 11.1.x Command Reference Guide N to Z show ip show ip [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays general information for IP. Description filter See Filtering show Commands on page 4 Options Privileged Exec, User Exec Mode show ip...
Page 745: Show Ip Address
Chapter 7: S Commands show ip address show ip address [ vrfName ] [ brief | detail ] localAddress [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays interface information for the specified IP address. Description vrfName Name of the VRF Options brief Displays summary information about the interface...
Page 746: Show Ip As-Path-Access-List
JUNOSe 11.1.x Command Reference Guide N to Z show ip as-path-access-list show ip as-path-access-list [ accessListName ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about AS-path access lists. Description accessListName Name of an AS-path access list Options filter See Filtering show Commands on page 4 Privileged Exec, User Exec...
Page 747: Show Ip Bgp
Chapter 7: S Commands show ip bgp To display information about networks for all address families or for a specific address Syntax family other than the L2VPN address family and the route-target address family: show ip bgp [ ipv4 unicast | ipv4 multicast | vpnv4 all | vpnv4 vrf vrfName ] [ network [ networkMask [ longer-prefixes ] ] ] [ fields fieldOptions ] [ filter ] To display information for networks associated with only the L2VPN address family: show ip bgp { l2vpn all | l2vpn vpls vplsName | l2vpn vpws vpwsName }...
Page 748 JUNOSe 11.1.x Command Reference Guide N to Z l2vpn all Specifies all VPLS and VPWS instances in the L2VPN address family l2vpn vpls vplsName Specifies the VPLS instance with the name vplsName l2vpn vpws vpwsName Specifies the VPWS instance with the name vpwsName siteId Numerical identifier for the site;...
Page 749 Chapter 7: S Commands extended-communities Extended community imported Whether the route was imported intro Introductory information about the state of various BGP attributes; this information is displayed only if you specify this keyword in-label MPLS label for the route; the label received with incoming MPLS frames;...
Page 750: Show Ip Bgp Advertised-Routes
JUNOSe 11.1.x Command Reference Guide N to Z show ip bgp advertised-routes To display routes advertised to a neighbor or peer group in all address families or a Syntax particular address family: show ip bgp [ ipv4 unicast | ipv4 multicast | vpnv4 all | vpnv4 vrf vrfName | l2vpn [ all ] | route-target signaling ] { neighbors { ipAddress | ipv6Address } | peer-group peerGroupName } advertised-routes [ fields { fieldOptions } ] [ delta ] [ filter ]...
Page 751 Chapter 7: S Commands rtMemNlri variable replaced by rtfPrefix variable in JUNOSe Release 9.1.0. Displays the routes in the Adj-RIBs-Out table of the specified peer or peer group. For Description peers, displays routes that have been previously advertised to the peer and the attributes for the routes before the application of outbound policy.
Page 752 JUNOSe 11.1.x Command Reference Guide N to Z rtfPrefix Prefix representing the route-target membership NLRI (RT-MEM-NLRI), in the format asNumber:extendedCommunity/prefixLength (for example, 320:320:524/36) where: asNumber AS number for origin of route target information, in the range 1–4294967295 extendedCommunity Two-part number in the format number1:number2 that identifies an extended community of VPNs, in the format number1:number2, where: number1 Autonomous system (AS) number, in the range...
Page 753 Chapter 7: S Commands med Multiexit discriminator for the route next-hop IP address of the next router that is used when forwarding a packet to the destination network next-hop-cost Whether the indirect next hop of the route is unreachable, if not, displays IGP cost to the indirect next hop origin Origin of the route originator-id Router ID of the router in the local AS that originated the route out-label MPLS label for the route;...
Page 754: Show Ip Bgp Aggregate-Address
JUNOSe 11.1.x Command Reference Guide N to Z show ip bgp aggregate-address show ip bgp [ ipv4 unicast | ipv4 multicast | vpnv4 all | vpnv4 vrf vrfName ] Syntax aggregate-address [ ipAddress mask ] [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about aggregate addresses.
Page 755: Show Ip Bgp Cidr-Only
Chapter 7: S Commands show ip bgp cidr-only show ip bgp [ ipv4 unicast | ipv4 multicast | vpnv4 all | vpnv4 vrf vrfName ] Syntax cidr-only [ fields { fieldOptions } ] [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information Displays information only about routes having nonnatural network masks.
Page 756 JUNOSe 11.1.x Command Reference Guide N to Z loc-pref Local preference for the route med Multiexit discriminator for the route next-hop IP address of the next router that is used when forwarding a packet to the destination network next-hop-cost Whether the indirect next hop of the route is unreachable, if not, displays IGP cost to the indirect next hop origin Origin of the route originator-id Router ID of the router in the local AS that originated the route...
Page 757: Show Ip Bgp Community
Chapter 7: S Commands show ip bgp community show ip bgp [ ipv4 unicast | ipv4 multicast | vpnv4 all | vpnv4 vrf vrfName | Syntax l2vpn all | l2vpn vpls vplsName | l2vpn vpws vpwsName | route-target signaling ] community { communityNumber | local-as | no-advertise | no-export } [ communityNumber | local-as | no-advertise | no-export ]* [ exact-match ] [ fields fieldOptions ] [ filter ]...
Page 758 JUNOSe 11.1.x Command Reference Guide N to Z | next-hop-cost | origin | originator-id | out-label | peer | peer-type | rd | safi | stale | unknown-types | weight ]* all All available information; not recommended, because this information for each network does not fit on a single line and is difficult to read afi Address family identifier aggregator AS number and IP address of aggregator...
Page 759 Chapter 7: S Commands weight Weight of the route * Indicates that one or more parameters can be repeated multiple times in a list in the command line filter See Filtering show Commands on page 4 Privileged Exec, User Exec Mode Monitoring BGP-Related Settings for L2VPNs in the JUNOSe BGP and MPLS Related Topics...
Page 760: Show Ip Bgp Community-List
JUNOSe 11.1.x Command Reference Guide N to Z show ip bgp community-list show ip bgp [ ipv4 unicast | ipv4 multicast | vpnv4 all | vpnv4 vrf vrfName | Syntax l2vpn all | l2vpn vpls vplsName | l2vpn vpws vpwsName | route-target signaling ] community-list communityListName [ exact-match ] [ fields fieldOptions ] [ filter ] Command introduced before JUNOSe Release 7.1.0.
Page 761 Chapter 7: S Commands best Whether this is the best route for the prefix clusters List of cluster IDs through which the route has been advertised communities Community number associated with the route extended-communities Extended community imported Whether the route was imported intro Introductory information about the state of various BGP attributes;...
Page 762 JUNOSe 11.1.x Command Reference Guide N to Z Monitoring BGP-Related Settings for L2VPNs in the JUNOSe BGP and MPLS Related Topics Configuration Guide show ip bgp community-list...
Page 763: Show Ip Bgp Dampened-Paths
Chapter 7: S Commands show ip bgp dampened-paths show ip bgp [ ipv4 unicast | ipv4 multicast | vpnv4 all | vpnv4 vrf vrfName | Syntax l2vpn all | l2vpn vpls vplsName | l2vpn vpws vpwsName | route-target signaling ] dampened-paths [ fields fieldOptions ] [ filter ] Command introduced before JUNOSe Release 7.1.0.
Page 764 JUNOSe 11.1.x Command Reference Guide N to Z communities Community number associated with the route extended-communities Extended community imported Whether the route was imported intro Introductory information about the state of various BGP attributes; this information is displayed only if you specify this keyword in-label MPLS label for the route;...
Page 765: Show Ip Bgp Filter-List
Chapter 7: S Commands show ip bgp filter-list show ip bgp [ ipv4 unicast | ipv4 multicast | vpnv4 all | vpnv4 vrf vrfName | Syntax l2vpn all | l2vpn vpls vplsName | l2vpn vpws vpwsName | route-target signaling ] filter-list asPathAccessListName [ fields fieldOptions ] [ filter ] Command introduced before JUNOSe Release 7.1.0.
Page 766 JUNOSe 11.1.x Command Reference Guide N to Z best Whether this is the best route for the prefix clusters List of cluster IDs through which the route has been advertised communities Community number associated with the route extended-communities Extended community imported Whether the route was imported intro Introductory information about the state of various BGP attributes;...
Page 767 Chapter 7: S Commands See Monitoring BGP-Related Settings for L2VPNs in JUNOSe BGP and MPLS Related Topics Configuration Guide show ip bgp filter-list...
Page 768: Show Ip Bgp Flap-Statistics
JUNOSe 11.1.x Command Reference Guide N to Z show ip bgp flap-statistics To display information about dampened routes for address families other than the Syntax L2VPN and route-target signaling address families: show ip bgp [ ipv4 unicast | ipv4 multicast | vpnv4 all | vpnv4 vrf vrfName ] flap-statistics [ network [ networkMask ] ] [ filter ] To display information about dampened routes for only the route-target signaling address family:...
Page 769 Chapter 7: S Commands rtfPrefix Prefix representing the route-target membership NLRI (RT-MEM-NLRI), in the format asNumber:extendedCommunity/prefixLength (for example, 320:320:524/36) where: asNumber AS number for origin of route target information, in the range 1–4294967295 extendedCommunity Two-part number in the format number1:number2 that identifies an extended community of VPNs, in the format number1 : number2, where: number1 Autonomous system (AS) number, in the range...
Page 770: Show Ip Bgp Inconsistent-As
JUNOSe 11.1.x Command Reference Guide N to Z show ip bgp inconsistent-as show ip bgp Syntax [ ipv4 unicast | ipv4 multicast | vpnv4 all | vpnv4 vrf vrfName | route-target signaling ] inconsistent-as [ fields { fieldOptions } ] [ filter ] Command introduced before JUNOSe Release 7.1.0.
Page 771 Chapter 7: S Commands intro Introductory information about the state of various BGP attributes; this information is displayed only if you specify this keyword in-label MPLS label for the route; the label received with incoming MPLS frames; typically, but not always, this is the label advertised to MP-BGP peers loc-pref Local preference for the route med Multiexit discriminator for the route next-hop IP address of the next router that is used when forwarding a...
Page 772: Show Ip Bgp Neighbors
JUNOSe 11.1.x Command Reference Guide N to Z show ip bgp neighbors show ip bgp [ ipv4 unicast | ipv4 multicast | vpnv4 all | vpnv4 vrf vrfName | Syntax l2vpn [ all ] | route-target signaling ] neighbors [ ipAddress | ipv6Address ] [ delta ] [ filter ] Command introduced before JUNOSe Release 7.1.0.
Page 773: Show Ip Bgp Neighbors Dampened-Routes
Chapter 7: S Commands show ip bgp neighbors dampened-routes show ip bgp [ ipv4 unicast | ipv4 multicast | vpnv4 all | vpnv4 vrf vrfName | Syntax l2vpn [ all ] | route-target signaling ] neighbors { ipAddress | ipv6Address } dampened-routes [ fields fieldOptions ] [ delta ] [ filter ] Command introduced before JUNOSe Release 7.1.0.
Page 774 JUNOSe 11.1.x Command Reference Guide N to Z best Whether this is the best route for the prefix clusters List of cluster IDs through which the route has been advertised communities Community number associated with the route extended-communities Extended community imported Whether the route was imported intro Introductory information about the state of various BGP attributes;...
Page 775 Chapter 7: S Commands See Monitoring BGP-Related Settings for L2VPNs in JUNOSe BGP and MPLS Related Topics Configuration Guide show ip bgp neighbors dampened-routes...
Page 776: Show Ip Bgp Neighbors Paths
JUNOSe 11.1.x Command Reference Guide N to Z show ip bgp neighbors paths show ip bgp Syntax [ ipv4 unicast | ipv4 multicast | vpnv4 all | vpnv4 vrf vrfName | route-target signaling ] neighbors { ipAddress | ipv6Address } paths [ regularExpression ] [ filter ] Command introduced before JUNOSe Release 7.1.0.
Page 777: Show Ip Bgp Neighbors Received Prefix-Filter
Chapter 7: S Commands show ip bgp neighbors received prefix-filter show ip bgp [ ipv4 unicast | ipv4 multicast | vpnv4 all | vpnv4 vrf vrfName ] Syntax neighbors { ipAddress | ipv6Address } received prefix-filter [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information ipv6Address variable added in JUNOSe Release 8.0.0.
Page 778: Show Ip Bgp Neighbors Received-Routes
JUNOSe 11.1.x Command Reference Guide N to Z show ip bgp neighbors received-routes show ip bgp [ ipv4 unicast | ipv4 multicast | vpnv4 all | vpnv4 vrf vrfName | Syntax l2vpn all | route-target signaling ] neighbors { ipAddress | ipv6Address } received-routes [ fields fieldOptions ] [ delta ] [ filter ] Command introduced before JUNOSe Release 7.1.0.
Page 779 Chapter 7: S Commands best Whether this is the best route for the prefix clusters List of cluster IDs through which the route has been advertised communities Community number associated with the route extended-communities Extended community imported Whether the route was imported intro Introductory information about the state of various BGP attributes;...
Page 780 JUNOSe 11.1.x Command Reference Guide N to Z See Monitoring BGP-Related Settings for L2VPNs in JUNOSe BGP and MPLS Related Topics Configuration Guide show ip bgp neighbors received-routes...
Page 781: Show Ip Bgp Neighbors Routes
Chapter 7: S Commands show ip bgp neighbors routes show ip bgp [ ipv4 unicast | ipv4 multicast | vpnv4 all | vpnv4 vrf vrfName | Syntax l2vpn [ all ] | route-target signaling ] neighbors { ipAddress | ipv6Address } routes [ fields fieldOptions ] [ delta ] [ filter ] Command introduced before JUNOSe Release 7.1.0.
Page 782 JUNOSe 11.1.x Command Reference Guide N to Z best Whether this is the best route for the prefix clusters List of cluster IDs through which the route has been advertised communities Community number associated with the route extended-communities Extended community imported Whether the route was imported intro Introductory information about the state of various BGP attributes;...
Page 783 Chapter 7: S Commands See Monitoring BGP-Related Settings for L2VPNs in JUNOSe BGP and MPLS Related Topics Configuration Guide show ip bgp neighbors routes...
Page 784: Show Ip Bgp Network
JUNOSe 11.1.x Command Reference Guide N to Z show ip bgp network To display information about a prefix configured for all address families or for a Syntax specific address family other than the route-target address family: show ip bgp [ ipv4 unicast | ipv4 multicast | vpnv4 all | vpnv4 vrf vrfName ] network [ networkNumber [ [ mask ] networkMask ] ] [ filter ] To display information about about a prefix configured for the route-target address family:...
Page 785 Chapter 7: S Commands number2 Unique integer, in the range 1–4294967295; 32 bits if number1 is a 16-bit AS number; 16 bits if number1 is an IP address or a 32-bit AS number prefixLength Number that specifies the length of the route prefix, in the range 32–96 filter See Filtering show Commands on page 4 Privileged Exec, User Exec...
Page 786: Show Ip Bgp Next-Hops
JUNOSe 11.1.x Command Reference Guide N to Z show ip bgp next-hops show ip bgp [ ipv4 unicast | ipv4 multicast | vpnv4 all | vpnv4 vrf vrfName | Syntax l2vpn all | l2vpn vpls vplsName | l2vpn vpws vpwsName } | route-target signaling ] next-hops [ ipAddress ] [ filter ] Command introduced before JUNOSe Release 7.1.0.
Page 787: Show Ip Bgp Paths
Chapter 7: S Commands show ip bgp paths show ip bgp [ ipv4 unicast | ipv4 multicast | vpnv4 all | vpnv4 vrf vrfName | Syntax l2vpn all | l2vpn vpls vplsName | l2vpn vpws vpwsName | route-target signaling ] paths [ regularExpression ] [ filter ] Command introduced before JUNOSe Release 7.1.0.
Page 788: Show Ip Bgp Peer-Group
JUNOSe 11.1.x Command Reference Guide N to Z show ip bgp peer-group show ip bgp [ ipv4 unicast | ipv4 multicast | vpnv4 all | vpnv4 vrf vrfName | Syntax l2vpn [ all ] | route-target signaling ] peer-group [ peerGroupName ] [ filter ] Command introduced before JUNOSe Release 7.1.0.
Page 789: Show Ip Bgp Quote-Regexp
Chapter 7: S Commands show ip bgp quote-regexp show ip bgp [ ipv4 unicast | ipv4 multicast | vpnv4 all | vpnv4 vrf vrfName | Syntax l2vpn all | l2vpn vpls vplsName | l2vpn vpws vpwsName | route-target signaling ] quote-regexp pathExpression [ fields fieldOptions ] [ filter ] Command introduced before JUNOSe Release 7.1.0.
Page 790 JUNOSe 11.1.x Command Reference Guide N to Z ^ Matches the beginning of the path unless appearing as the first character within brackets; see below [^ ] Matches any AS number except the ones specified within the brackets $ Matches the end of the path { Matches the beginning of an AS_SET } Matches the end of an AS_SET ( Matches the start of an AS_CONFED_SET or AS_CONFED_SEQ...
Page 791 Chapter 7: S Commands atomic-aggregate Whether the atomic aggregate attribute is present best Whether this is the best route for the prefix clusters List of cluster IDs through which the route has been advertised communities Community number associated with the route extended-communities Extended community imported Whether the route was imported intro Introductory information about the state of various BGP attributes;...
Page 792 JUNOSe 11.1.x Command Reference Guide N to Z Monitoring BGP-Related Settings for L2VPNs in the JUNOSe BGP and MPLS Related Topics Configuration Guide show ip bgp quote-regexp...
Page 793: Show Ip Bgp Regexp
Chapter 7: S Commands show ip bgp regexp show ip bgp [ ipv4 unicast | ipv4 multicast | vpnv4 all | vpnv4 vrf vrfName | Syntax l2vpn all | l2vpn vpls vplsName | l2vpn vpws vpwsName | route-target signaling ] regexp pathExpression [ fields fieldOptions ] [ filter ] Command introduced before JUNOSe Release 7.1.0.
Page 794 JUNOSe 11.1.x Command Reference Guide N to Z ^ Matches the beginning of the path unless appearing as the first character within brackets; see below [^ ] Matches any AS number except the ones specified within the brackets $ Matches the end of the path { Matches the beginning of an AS_SET } Matches the end of an AS_SET ( Matches the start of an AS_CONFED_SET or AS_CONFED_SEQ...
Page 795 Chapter 7: S Commands atomic-aggregate Whether the atomic aggregate attribute is present best Whether this is the best route for the prefix clusters List of cluster IDs through which the route has been advertised communities Community number associated with the route extended-communities Extended community imported Whether the route was imported intro Introductory information about the state of various BGP attributes;...
Page 796 JUNOSe 11.1.x Command Reference Guide N to Z Monitoring BGP-Related Settings for L2VPNs in the JUNOSe BGP and MPLS Related Topics Configuration Guide show ip bgp regexp...
Page 797: Show Ip Bgp Summary
Chapter 7: S Commands show ip bgp summary show ip bgp [ ipv4 unicast | ipv4 multicast | vpnv4 all | vpnv4 vrf vrfName | Syntax l2vpn all | l2vpn vpls vplsName | l2vpn vpws vpwsName | route-target signaling ] summary [ fields fieldOptions ] [ delta ] [ filter ] Command introduced before JUNOSe Release 7.1.0.
Page 798 JUNOSe 11.1.x Command Reference Guide N to Z more-in-queue Status indicating whether any messages are waiting to be sent to this peer peer-type Type of BGP peer: internal, external, or confederation prefixes-received Number of unique prefixes received from the peer remote-as Remote AS number of the peer rib-version Last RIB version queued to be sent to this peer send-queue-length Number of messages queued to be sent to this peer...
Page 799: Show Ip Cache Flow
Chapter 7: S Commands show ip cache flow show ip cache flow [ history | active [ brief | detail Syntax [ interfaceType interfaceNumber ] ] ] [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information Displays IP flow cache operational statistics. Description history Displays a history (running total) of cache flows since the J-Flow statistics Options...
Page 800: Show Ip Cache Flow Aggregation
JUNOSe 11.1.x Command Reference Guide N to Z show ip cache flow aggregation show ip cache flow aggregation aggregationType [ history | active [ brief | detail ] ] Syntax [ filter ] Command introduced before JUNOSe Release 8.1.0. Release Information Displays IP flow cache operational statistics for an aggregation cache.
Page 801: Show Ip Community-List
Chapter 7: S Commands show ip community-list show ip community-list [ listName ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays community list information. Description listName Name of a community list Options filter See Filtering show Commands on page 4 Privileged Exec, User Exec Mode show ip community-list...
Page 802: Show Ip Demux Interface
JUNOSe 11.1.x Command Reference Guide N to Z show ip demux interface show ip demux interface interfaceType interfaceSpecifier [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about a subscriber interface. Description interfaceType Interface type; see Interface Types and Specifiers on page 5 Options interfaceSpecifier Particular interface;...
Page 803: Show Ip Dhcp-Capture
Chapter 7: S Commands show ip dhcp-capture show ip dhcp-capture [ filter ] Syntax Command introduced in JUNOSe Release 7.3.0. Release Information Displays the per-interface DHCP packet capture configuration information. Description filter See Filtering show Commands on page 4 Options Privileged Exec Mode Monitoring Duplicate MAC Addresses Use By DHCP Local Server Clients...
Page 804: Show Ip Dhcp-External Binding
JUNOSe 11.1.x Command Reference Guide N to Z show ip dhcp-external binding show ip dhcp-external binding [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays binding for DHCP external clients. Description NOTE: This command is deprecated and might be removed completely in a future release.
Page 805: Show Ip Dhcp-External Binding-Id
Chapter 7: S Commands show ip dhcp-external binding-id show ip dhcp-external binding-id [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays binding information for DHCP clients. Description NOTE: This command is deprecated and might be removed completely in a future release.
Page 806: Show Ip Dhcp-External Configuration
JUNOSe 11.1.x Command Reference Guide N to Z show ip dhcp-external configuration show ip dhcp-external configuration [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays configuration information for the DHCP external server. Description filter See Filtering show Commands on page 4 Options Privileged Exec Mode...
Page 807: Show Ip Dhcp-External Statistics
Chapter 7: S Commands show ip dhcp-external statistics show ip dhcp-external statistics [ delta ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays statistics for the DHCP external server. Description delta Displays baselined statistics Options filter See Filtering show Commands on page 4 Privileged Exec Mode...
Page 808: Show Ip Dhcp-Local
JUNOSe 11.1.x Command Reference Guide N to Z show ip dhcp-local show ip dhcp-local Syntax Command introduced in JUNOSe Release 7.2.0. Release Information Displays DHCP local server configuration information, including the status of SNMP Description traps and client roaming support. Privileged Exec Mode Monitoring DHCP Local Server Configuration...
Page 809: Show Ip Dhcp-Local Auth
Chapter 7: S Commands show ip dhcp-local auth show ip dhcp-local auth { config | statistics [ delta ] } [ filter ] Syntax Command introduced in JUNOSe Release 7.1.0. Release Information Displays information about the DHCP local server authentication configuration. Description config Specifies that configuration information is shown Options...
Page 810: Show Ip Dhcp-Local Binding
JUNOSe 11.1.x Command Reference Guide N to Z show ip dhcp-local binding show ip dhcp-local binding [ ipAddress | interface interfaceType interfaceValue ] Syntax [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information Displays DHCP local server binding information for DHCP local server clients. Description NOTE: This command is deprecated and might be removed completely in a future release.
Page 811: Show Ip Dhcp-Local Duplicate-Clients
Chapter 7: S Commands show ip dhcp-local duplicate-clients show ip dhcp-local duplicate-clients [ macAddress ] [ filter ] Syntax Command introduced in JUNOSe Release 7.2.0. Release Information Displays information about all, or specific, MAC addresses being used by more than Description one DHCP local server client.
Page 812: Show Ip Dhcp-Local Excluded
JUNOSe 11.1.x Command Reference Guide N to Z show ip dhcp-local excluded show ip dhcp-local excluded [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays IP addresses that have been excluded. These are addresses that the DHCP Description local server does not allocate because they are already used by devices on the subnet.
Page 813: Show Ip Dhcp-Local Leases
Chapter 7: S Commands show ip dhcp-local leases show ip dhcp-local leases [ ipAddress ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays DHCP local server lease and binding information. Description ipAddress Specific IP address Options filter See Filtering show Commands on page 4 Privileged Exec...
Page 814: Show Ip Dhcp-Local Limits
JUNOSe 11.1.x Command Reference Guide N to Z show ip dhcp-local limits show ip dhcp-local limits [ interface InterfaceType InterfaceSpecifier | filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information interface keyword and interfaceType and interfaceSpecifier variables added in JUNOSe Release 7.1.0.
Page 815: Show Ip Dhcp-Local Pool
Chapter 7: S Commands show ip dhcp-local pool show ip dhcp-local pool [ groups ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the configuration of DHCP local pools. Description groups Displays DHCP local server pool group information Options filter See Filtering show Commands on page 4 Privileged Exec...
Page 816: Show Ip Dhcp-Local Reserved
JUNOSe 11.1.x Command Reference Guide N to Z show ip dhcp-local reserved show ip dhcp-local reserved [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the static IP address/MAC address pairs that the DHCP local server supplies Description in standalone mode.
Page 817: Show Ip Dhcp-Local Statistics
Chapter 7: S Commands show ip dhcp-local statistics show ip dhcp-local statistics [ interface [ interfaceType interfaceSpecifier ] ] Syntax [ delta ] [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information Displays statistics for the DHCP local server. Description interfaceType Interface type;...
Page 818: Show Ip Domain-Lookup
JUNOSe 11.1.x Command Reference Guide N to Z show ip domain-lookup show ip domain-lookup [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the name servers that you have specified on the router with the ip Description name-server command.
Page 819: Show Ip Dvmrp
Chapter 7: S Commands show ip dvmrp show ip dvmrp [ delta ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays DVMRP information for a virtual router. Description delta Displays baselined statistics Options filter See Filtering show Commands on page 4 Privileged Exec, User Exec Mode show ip dvmrp...
Page 820: Show Ip Dvmrp Interface
JUNOSe 11.1.x Command Reference Guide N to Z show ip dvmrp interface show ip dvmrp interface Syntax { { [ brief ] [ interfaceType interfaceSpecifier ] } | summary } [ delta ] [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information Displays DVMRP parameters for the specified interfaces.
Page 821: Show Ip Dvmrp Mroute
Chapter 7: S Commands show ip dvmrp mroute show ip dvmrp mroute [ group [ sourceAddress [ sourceMask ] ] ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about DVMRP routes to multicast groups. Description group IP address of a specific multicast group Options...
Page 822: Show Ip Dvmrp Neighbor
JUNOSe 11.1.x Command Reference Guide N to Z show ip dvmrp neighbor show ip dvmrp neighbor [ interfaceType interfaceSpecifier [ ipAddress ] ] Syntax [ brief ] [ delta ] [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about DVMRP neighbors.
Page 823: Show Ip Dvmrp Route
Chapter 7: S Commands show ip dvmrp route show ip dvmrp route Syntax [ ipAddress [ addressMask ] | interfaceType interfaceSpecifier ] [ brief ] [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about DVMRP routes. Description ipAddress IP address for which the best route is displayed Options...
Page 824: Show Ip Dvmrp Routenexthop
JUNOSe 11.1.x Command Reference Guide N to Z show ip dvmrp routeNextHop show ip dvmrp routeNextHop Syntax [ ipAddress [ addressMask [ interfaceType interfaceSpecifier ] ] ] [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about the next hop. Description ipAddress IP address of the network Options...
Page 825: Show Ip Explicit-Paths
Chapter 7: S Commands show ip explicit-paths show { mpls | ip } explicit-paths Syntax [ detail | { name pathName | identifier pathNum } ] [ filter ] Displays all explicit paths or a particular explicit path in a non–E Series Description implementation.
Page 826: Show Ip Extcommunity-List
JUNOSe 11.1.x Command Reference Guide N to Z show ip extcommunity-list show ip extcommunity-list [ listName ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays all extended-community lists or a specific extended-community list. Description listName Name of the extended-community list Options filter See Filtering show Commands on page 4 Privileged Exec...
Page 827: Show Ip Flow
Chapter 7: S Commands show ip flow show ip flow { export | sampling } Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays configuration values for either J-Flow sampling or export. Description export Displays export configuration settings Options sampling Displays sampling configuration settings Privileged Exec, User Exec Mode...
Page 828: Show Ip Forwarding-Table Slot
JUNOSe 11.1.x Command Reference Guide N to Z show ip forwarding-table slot show ip forwarding-table slot slotNumber Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about routing table memory, load errors, and status for the Description forwarding table of a specific line module. slotNumber Number of the slot containing the line module Options Privileged Exec, User Exec...
Page 829: Show Ip Http
Chapter 7: S Commands show ip http show ip http [ scalar | server | statistics [ delta ] ] [ filter ] Syntax Command introduced in JUNOSe Release 7.2.0. Release Information Displays information about HTTP local servers, information about the parameters Description configured for the HTTP local server, and statistics about the connections to the HTTP local server.
Page 830: Show Ip Igmp
JUNOSe 11.1.x Command Reference Guide N to Z show ip igmp show ip igmp [ delta ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays IGMP information for a virtual router. Description delta Displays baselined statistics Options filter See Filtering show Commands on page 4 Privileged Exec, User Exec...
Page 831: Show Ip Igmp Groups
Chapter 7: S Commands show ip igmp groups show ip igmp groups [ count ] [ groupAddress ] Syntax [ interfaceType interfaceSpecifier ] [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about statically joined and directly connected groups learned Description by means of IGMP.
Page 832: Show Ip Igmp Interface
JUNOSe 11.1.x Command Reference Guide N to Z show ip igmp interface show ip igmp interface [ brief | count ] [ delta ] Syntax [ interfaceType interfaceSpecifier ] [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information Displays IGMP information for interfaces on which you enabled IGMP.
Page 833: Show Ip Igmp Mapped-Oif
Chapter 7: S Commands show ip igmp mapped-oif show ip igmp mapped-oif [ interfaceType interfaceSpecifier ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the current mappings to all mapped outgoing interfaces or to the specified Description outgoing interface.
Page 834: Show Ip Igmp Membership
JUNOSe 11.1.x Command Reference Guide N to Z show ip igmp membership show ip igmp membership [ groupAddress ] [ tracked ] Syntax [ interfaceType interfaceSpecifier ] [ filter ] Command introduced in JUNOSe Release 8.2.0. Release Information Displays IGMP membership information for multicast groups and (S, G) channels. Description groupAddress Address of the group whose membership information you want Options...
Page 835: Show Ip Igmp Oif-Map
Chapter 7: S Commands show ip igmp oif-map show ip igmp oif-map [ mapName ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays all outgoing interface (OIF) maps or the OIF map for the specified interface. Description mapName Outgoing interface multicast map name Options...
Page 836: Show Ip Igmp Oif-Mapping
JUNOSe 11.1.x Command Reference Guide N to Z show ip igmp oif-mapping show ip igmp oif-mapping mapName [ groupAddress [ sourceAddress ] ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the mapped OIF that would be assigned to a given map name, group address, Description and source address.
Page 837: Show Ip Igmp-Proxy
Chapter 7: S Commands show ip igmp-proxy show ip igmp-proxy [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays IGMP proxy parameters on a virtual router. Description filter See Filtering show Commands on page 4 Options Privileged Exec, User Exec Mode show ip igmp-proxy...
Page 838: Show Ip Igmp-Proxy Groups
JUNOSe 11.1.x Command Reference Guide N to Z show ip igmp-proxy groups show ip igmp-proxy groups [ groupAddress | count ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about multicast groups that IGMP proxy interfaces reported. Description groupAddress IP address of a group for which you want to display information Options...
Page 839: Show Ip Igmp-Proxy Interface
Chapter 7: S Commands show ip igmp-proxy interface show ip igmp-proxy interface [ brief ] [ delta ] [ interfaceType interfaceSpecifier ] Syntax [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about the interface on which you configured IGMP proxy. Description brief Displays summarized information Options...
Page 840: Show Ip Igmp Ssm-Mapping
JUNOSe 11.1.x Command Reference Guide N to Z show ip igmp ssm-mapping show ip igmp ssm-mapping [ groupAddress ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the SSM mapping state and the source list mapping associated with a Description multicast group address.
Page 841: Show Ip Interface
Chapter 7: S Commands show ip interface show ip interface [ vrf vrfName ] Syntax { { [ brief | detail | other | show-virtual-router [ virtualRouterName ] ] [ interfaceType interfaceSpecifier ] } | summary } [ delta ] [ filter ] Command introduced before JUNOSe Release 7.1.0.
Page 842: Show Ip Interface Shares
JUNOSe 11.1.x Command Reference Guide N to Z show ip interface shares show ip interface shares [ vrf vrfName ] [ brief | detail ] Syntax [ interfaceType interfaceSpecifier ] [ delta ] [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about shared IP interfaces for all IP interfaces or for the IP Description...
Page 843: Show Ip Interface Vrf
Chapter 7: S Commands show ip interface vrf show ip interface vrf vrfName [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays current state of all interfaces on the specified VRF. Description vrfName Name of the VRF Options filter See Filtering show Commands on page 4 Privileged Exec, User Exec...
Page 844: Show Ip Local Alias
JUNOSe 11.1.x Command Reference Guide N to Z show ip local alias show ip local alias [ aliasName ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about the aliases for local address pools configured on your Description system.
Page 845: Show Ip Local Pool
Chapter 7: S Commands show ip local pool show ip local pool [ poolName | statistics [ delta ] ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about the local address pools configured on the router. Description poolName Name of a specific local address pool Options...
Page 846: Show Ip Local Shared-Pool
JUNOSe 11.1.x Command Reference Guide N to Z show ip local shared-pool show ip local shared-pool [ poolName ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about the shared local address pools configured on the router. Description poolName Name of a specific shared local address pool Options...
Page 847: Show Ip Mac-Validate Interface
Chapter 7: S Commands show ip mac-validate interface show ip mac-validate interface interfaceType interfaceSpecifier ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the status of MAC address validation on the physical interface that you Description specify.
Page 848: Show Ip Match-Policy-List
JUNOSe 11.1.x Command Reference Guide N to Z show ip match-policy-list show ip match-policy-list [ listName ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays all the policy lists or the policy list that you specify. The default is all policy Description lists.
Page 849: Show Ip Mirror Interface
Chapter 7: S Commands show ip mirror interface show ip mirror interface [ vrf vrfName ] [ interfaceType interfaceSpecifier ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about the interface mirroring configuration of all interfaces, or Description for a specific interface on which mirroring is enabled.
Page 850: Show Ip Mobile Binding
JUNOSe 11.1.x Command Reference Guide N to Z show ip mobile binding show ip mobile binding [ nai { user@realm | @realm | @ } | ipAddress | Syntax summary ] [ filter ] Command introduced in JUNOSe Release 9.0.0. Release Information Displays the contents of the binding table for the Mobile IP home agent in the current Description...
Page 851: Show Ip Mobile Home-Agent
Chapter 7: S Commands show ip mobile home-agent show ip mobile home-agent Syntax Command introduced in JUNOSe Release 9.0.0. Release Information Displays configuration information for the Mobile IP home agent in the current virtual Description router. This information includes access list name, registration lifetime, replay protection time, and reverse tunnel setting.
Page 852: Show Ip Mobile Host
JUNOSe 11.1.x Command Reference Guide N to Z show ip mobile host show ip mobile host [ nai { user@realm | @realm | @ } | ipAddress ] [ filter ] Syntax Command introduced in JUNOSe Release 9.0.0. Release Information Displays configuration information for all or specified mobile nodes or domain users.
Page 853: Show Ip Mobile Profile
Chapter 7: S Commands show ip mobile profile show ip mobile profile Syntax Command introduced in JUNOSe Release 9.0.0. Release Information Displays the name of the interface profile associated with the Mobile IP home agent Description in the current virtual router. Privileged Exec, User Exec Mode show ip mobile profile...
Page 854: Show Ip Mobile Secure Foreign-Agent
JUNOSe 11.1.x Command Reference Guide N to Z show ip mobile secure foreign-agent show ip mobile secure foreign-agent [ ipAddress ] [ filter ] Syntax Command introduced in JUNOSe Release 9.0.0. Release Information Displays the security associations configured for all Mobile IP foreign agents in the Description current virtual router.
Page 855: Show Ip Mobile Secure Host
Chapter 7: S Commands show ip mobile secure host show ip mobile secure host [ nai { user@realm | @realm | @ } | ipAddress ] Syntax [ filter ] Command introduced in JUNOSe Release 9.0.0. Release Information Displays the security associations configured for all mobile nodes or domains in the Description current virtual router.
Page 856: Show Ip Mobile Traffic
JUNOSe 11.1.x Command Reference Guide N to Z show ip mobile traffic show ip mobile traffic [ delta ] Syntax Command introduced in JUNOSe Release 9.0.0. Release Information Displays protocol statistics for the Mobile IP home agent traffic, including Description advertisements, solicitations, registrations, registration errors, and security violations.
Page 857: Show Ip Mroute
Chapter 7: S Commands show ip mroute show ip mroute [ groupIpAddress [ sourceIpAddress ] ] Syntax [ summary | count | statistics ] [ active [ bandwidth ] ] [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information active keyword added in JUNOSe Release 8.1.0.
Page 858: Show Ip Multicast Protocols
JUNOSe 11.1.x Command Reference Guide N to Z show ip multicast protocols show ip multicast protocols [ brief ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about the multicast protocols enabled on the router. Description brief Displays a summary rather than detailed information Options...
Page 859: Show Ip Multicast Routing
Chapter 7: S Commands show ip multicast routing show ip multicast routing Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about the status of multicast routing on the router. Description filter See Filtering show Commands on page 4 Options Privileged Exec, User Exec Mode...
Page 860: Show Ip Nat Inside Rule
JUNOSe 11.1.x Command Reference Guide N to Z show ip nat inside rule show ip nat inside rule [ accessListName ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays NAT inside rule information. Description accessListName Name of the access list Options filter See Filtering show Commands on page 4 User Exec...
Page 861: Show Ip Nat Outside Rule
Chapter 7: S Commands show ip nat outside rule show ip nat outside rule [ accessListName ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays NAT outside rule information. Description accessListName Name of the access list Options filter See Filtering show Commands on page 4 User Exec...
Page 862: Show Ip Nat Pool
JUNOSe 11.1.x Command Reference Guide N to Z show ip nat pool show ip nat pool [ poolName ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays NAT address pool information. Description poolName Name of the pool Options filter See Filtering show Commands on page 4 User Exec...
Page 863: Show Ip Nat Statistics
Chapter 7: S Commands show ip nat statistics show ip nat statistics [ global [ pool ] | pool [ poolName ] ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays internal NAT statistics. Description global Displays system-wide statistics Options pool Displays address pool statistics...
Page 864: Show Ip Nat Translations
JUNOSe 11.1.x Command Reference Guide N to Z show ip nat translations show ip nat translations [ static | dynamic ] [ gre | icmp | tcp | udp ]* [ verbose ] Syntax [ filter ] show ip nat translations inside insideLocalIpAddress [ localPort ] [ insideGlobalIpAddress [ globalPort ] ] [ verbose ] [ filter ] show ip nat translations outside outsideGlobalIpAddress [ globalPort ] [ outsideLocalIpAddress [ localPort ] ] [ verbose ] [ filter ]...
Page 865: Show Ip Nfs
Chapter 7: S Commands show ip nfs show ip nfs [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about the interface that the current virtual router uses to Description exchange messages with the NFS server. filter See Filtering show Commands on page 4 Options Privileged Exec, User Exec...
Page 866: Show Ip Ospf
JUNOSe 11.1.x Command Reference Guide N to Z show ip ospf show ip ospf [ vrf vrfName ] [ delta ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays general information about OSPF routing processes. Description vrfName Name of the VRF Options...
Page 867: Show Ip Ospf Border-Routers
Chapter 7: S Commands show ip ospf border-routers show ip ospf border-routers [ vrf vrfName ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays routing table entries for area border and AS boundary routers. Description vrfName Name of the VRF Options filter See Filtering show Commands on page 4...
Page 868: Show Ip Ospf Database
JUNOSe 11.1.x Command Reference Guide N to Z show ip ospf database show ip ospf database [ vrf vrfName ] [ database-summary | area areaId | areaIdInt Syntax | { asbr-summary | external | network | nssa-external | router | summary | opaque-area | link-local } [ ipAddress | internal ] ] [ filter ] Command introduced before JUNOSe Release 7.1.0.
Page 869: Show Ip Ospf Interface
Chapter 7: S Commands show ip ospf interface show ip ospf interface [ vrf vrfName ] [ interfaceType interfaceSpecifier ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays a list of OSPFv2 interfaces. Description vrfName Name of the VRF Options interfaceType Interface type;...
Page 870: Show Ip Ospf Internal-Statistics
JUNOSe 11.1.x Command Reference Guide N to Z show ip ospf internal-statistics show ip ospf internal-statistics [ vrf vrfName ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays internal OSPFv2 statistics. Description vrfName Name of the VRF Options filter See Filtering show Commands on page 4 Privileged Exec, User Exec...
Page 871: Show Ip Ospf Neighbors
Chapter 7: S Commands show ip ospf neighbors show ip ospf neighbors [ vrf vrfName ] [ history ] [ neighborAddress ] Syntax [ interfaceType interfaceSpecifier ] [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information history keyword added in JUNOSe Release 7.3.0. Displays a list of OSPF neighbors.
Page 872: Show Ip Ospf Remote-Neighbor Interface
JUNOSe 11.1.x Command Reference Guide N to Z show ip ospf remote-neighbor interface show ip ospf remote-neighbor [ ipAddress ] interface [ vrf vrfName ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays interfaces associated with OSPF remote neighbors. Description ipAddress Source IP address of a remote neighbor Options...
Page 873: Show Ip Ospf Spf-Log
Chapter 7: S Commands show ip ospf spf-log show ip ospf spf-log [ vrf vrfName ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays how often and why the router has run a full SPF calculation. Description vrfName Name of the VRF Options...
Page 874: Show Ip Ospf Virtual-Links
JUNOSe 11.1.x Command Reference Guide N to Z show ip ospf virtual-links show ip ospf virtual-links [ vrf vrfName ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the parameters and the current state of OSPF virtual links. A virtual link is Description a logical connection between two routers.
Page 875: Show Ip Pim
Chapter 7: S Commands show ip pim show ip pim Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays general PIM router-level information. Description Privileged Exec, User Exec Mode show ip pim...
Page 876: Show Ip Pim Auto-Rp
JUNOSe 11.1.x Command Reference Guide N to Z show ip pim auto-rp show ip pim auto-rp [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about rendezvous point routers and the RP mapping agent in Description a PIM sparse mode environment.
Page 877: Show Ip Pim Bsr
Chapter 7: S Commands show ip pim bsr show ip pim bsr [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays BSR information and the group prefixes for which the local router is a C-RP Description in a PIM sparse mode environment.
Page 878: Show Ip Pim Data-Mdt
JUNOSe 11.1.x Command Reference Guide N to Z show ip pim data-mdt show ip pim data-mdt [ senders | receivers ] [ group groupIPAddress ] Syntax [ source sourceIPAddress ] [ summary | count ] Command introduced in JUNOSe Release 8.2.0. Release Information Displays the configuration and status of a data MDT.
Page 879: Show Ip Pim Dense-Mode Sg-State
Chapter 7: S Commands show ip pim dense-mode sg-state show ip pim dense-mode sg-state Syntax [ group groupAddress [ source sourceAddress ] ] [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information Displays information for each SG entry that PIM dense mode knows about. Description groupAddress IP address of a multicast group Options...
Page 880: Show Ip Pim Interface
JUNOSe 11.1.x Command Reference Guide N to Z show ip pim interface show ip pim interface { summary | [ interfaceType interfaceSpecifier ] [ count ] Syntax [ filter ] } Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about each PIM dense mode interface. Description summary Displays the number of configured, enabled, and disabled PIM dense Options...
Page 881: Show Ip Pim Neighbor
Chapter 7: S Commands show ip pim neighbor show ip pim neighbor [ interfaceType interfaceSpecifier ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about each PIM neighbor that the router has discovered. Description interfaceType Interface type;...
Page 882: Show Ip Pim Remote-Neighbor
JUNOSe 11.1.x Command Reference Guide N to Z show ip pim remote-neighbor show ip pim remote-neighbor [ ipAddress ] [ count ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about all PIM remote neighbors or the specified remote neighbor. Description NOTE: This command is typically used when you configure PIM remote neighbors to run multicast services over BGP/MPLS VPNs.
Page 883: Show Ip Pim Rp
Chapter 7: S Commands show ip pim rp show ip pim rp { groupAddress | mapping } [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about PIM group-to-RP mappings. Description groupAddress Address of a group for which you want to view group-to-RP Options mappings mapping Displays all group-to-RP mappings that the router has recorded...
Page 884: Show Ip Pim Rp-Hash
JUNOSe 11.1.x Command Reference Guide N to Z show ip pim rp-hash show ip pim rp-hash groupAddress [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Shows which RP a multicast group is using. Description groupAddress IP address of multicast group for which you want to view the RP Options filter See Filtering show Commands on page 4 Privileged Exec, User Exec...
Page 885: Show Ip Pim Sparse-Mode Sg-State
Chapter 7: S Commands show ip pim sparse-mode sg-state show ip pim sparse-mode sg-state [ group groupAddress Syntax [ source sourceAddress ] | rp rpAddress ] [ count ] [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information Displays information for each SG entry that PIM sparse mode knows about.
Page 886: Show Ip Pim Sparse-Mode Unicast-Route
JUNOSe 11.1.x Command Reference Guide N to Z show ip pim sparse-mode unicast-route show ip pim sparse-mode unicast-route [ routeAddress routeMask ] [ count ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the unicast routes that PIM sparse mode is using. Description routeAddress IP address associated with a unicast route Options...
Page 887: Show Ip Pim Spt-Threshold
Chapter 7: S Commands show ip pim spt-threshold show ip pim spt-threshold [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the threshold for switching to the shortest-path-tree at a PIM designated Description router. filter See Filtering show Commands on page 4 Options Privileged Exec, User Exec Mode...
Page 888: Show Ip Prefix-List
JUNOSe 11.1.x Command Reference Guide N to Z show ip prefix-list show ip prefix-list [ listName [ seq seqNum | ipPrefix [ longer | first-match ] ] ] Syntax [ filter ] To display summary or detail info: show ip prefix-list { summary | detail } [ listName ] [ filter ] Command introduced before JUNOSe Release 7.1.0.
Page 889: Show Ip Prefix-Tree
Chapter 7: S Commands show ip prefix-tree show ip prefix-tree [ treeName [ ipPrefix [ longer ] ] ] [ filter ] Syntax To display summary or detail info: show ip prefix-tree { summary | detail } [ treeName ] [ filter ] Command introduced before JUNOSe Release 7.1.0.
Page 890: Show Ip Profile
JUNOSe 11.1.x Command Reference Guide N to Z show ip profile show ip profile profileName [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about a specific IP profile. Description profileName Name of the profile you want to display Options filter See Filtering show Commands on page 4 Privileged Exec, User Exec...
Page 891: Show Ip Protocols
Chapter 7: S Commands show ip protocols show ip protocols [ vrf vrfName ] [ summary ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays detailed information about IP protocols currently configured on the router. Description vrfName Displays information about protocols only for the specified VRF Options...
Page 892: Show Ip Redistribute
JUNOSe 11.1.x Command Reference Guide N to Z show ip redistribute show ip redistribute [ vrfName ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays configured route redistribution policy. Description vrfName Name of the VRF Options filter See Filtering show Commands on page 4 Privileged Exec, User Exec...
Page 893: Show Ip Rip
Chapter 7: S Commands show ip rip show ip rip [ vrf vrfName ] [ brief ] [ ifconfig ] [ ipAddress ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays limited RIP general status information. Description vrfName Name of the VRF Options...
Page 894: Show Ip Rip Database
JUNOSe 11.1.x Command Reference Guide N to Z show ip rip database show ip rip database [ vrf vrfName ] [ all ] [ inactive ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays route entries in the RIP routing table (RIP database). Description vrfName Name of the VRF Options...
Page 895: Show Ip Rip Network
Chapter 7: S Commands show ip rip network show ip rip network [ vrf vrfName ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the networks associated with the RIP routing process. Description vrfName Name of the VRF Options filter See Filtering show Commands on page 4 Privileged Exec, User Exec...
Page 896: Show Ip Rip Peer
JUNOSe 11.1.x Command Reference Guide N to Z show ip rip peer show ip rip peer [ vrf vrfName ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays all RIP neighbors, with limited information about each peer. Description vrfName Name of the VRF Options...
Page 897: Show Ip Rip Statistics
Chapter 7: S Commands show ip rip statistics show ip rip statistics [ vrf vrfName ] [ ipAddress ] [ delta ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays global statistics associated with the RIP routing process. If you specify an Description IP address, additionally displays statistics for that interface.
Page 898: Show Ip Rip Summary-Address
JUNOSe 11.1.x Command Reference Guide N to Z show ip rip summary-address show ip rip summary-address [ vrf vrfName ] [ ipAddress [ ipMask ] ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays RIP summary addresses. Description vrfName Name of the VRF Options...
Page 899: Show Ip Route
Chapter 7: S Commands show ip route show ip route [ vrf vrfName ] [ destination [ ipMask ] [ detail ] ] [ all ] [ protocol ] Syntax [ filter ] To display summary information: show ip route summary [ vrf vrfName ] [ filter ] Command introduced before JUNOSe Release 7.1.0.
Page 900 JUNOSe 11.1.x Command Reference Guide N to Z static Displays the best static routes added by network management to the routing table static-rpf Displays the best static RPF routes added by network management to the routing table summary Displays summary counters for all routes in the IP routing table filter See Filtering show Commands on page 4 Privileged Exec, User Exec Mode...
Page 901: Show Ip Route Slot
Chapter 7: S Commands show ip route slot show ip route slot slotNumber [ vrf vrfName ] ipAddress Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the interface and next hop for an IP address in the routing table of a line Description module.
Page 902: Show Ip Rpf-Route
JUNOSe 11.1.x Command Reference Guide N to Z show ip rpf-route show ip rpf-route [ vrf vrfName ] [ destination [ ipMask ] [ detail ] ] Syntax [ all ] [ protocol ] [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information Displays routes that the router can use to verify source addresses in multicast packets.
Page 903 Chapter 7: S Commands static Displays the best static routes added by network management to the routing table static-rpf Displays the best static RPF routes added by network management to the routing table filter See Filtering show Commands on page 4 Privileged Exec, User Exec Mode show ip rpf-route...
Page 904: Show Ip Service-Profile
JUNOSe 11.1.x Command Reference Guide N to Z show ip service-profile show ip service-profile [ profileName ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays information for IP service profiles. Description profileName Name of a specific service profile Options Privileged Exec Mode...
Page 905: Show Ip Socket Statistics
Chapter 7: S Commands show ip socket statistics show ip socket statistics [ detailed ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays BSD socket-emulation statistics. Description detailed Displays detailed statistics for each TCP socket Options filter See Filtering show Commands on page 4 Privileged Exec, User Exec...
Page 906: Show Ip Ssh
JUNOSe 11.1.x Command Reference Guide N to Z show ip ssh show ip ssh [ detail ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the current state of the SSH server. Description detail Displays detailed information Options filter See Filtering show Commands on page 4 Privileged Exec...
Page 907: Show Ip Static
Chapter 7: S Commands show ip static show ip static [ vrfName ] [ ipAddress ipMask [ all ] ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays general status information for static routes added by network management Description to the routing table.
Page 908: Show Ip-Subscriber
JUNOSe 11.1.x Command Reference Guide N to Z show ip-subscriber show ip-subscriber [ subscriberId | interface interfaceType interfaceSpecifier | username Syntax userName | virtual-router vrName | summary ] [ detail ] [ filter ] Command introduced in JUNOSe Release 8.1.0. Release Information filter variable added in JUNOSe Release 9.1.0.
Page 909: Show Ip Traffic
Chapter 7: S Commands show ip traffic show ip traffic [ vrfName ] [ delta ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays statistics about IP traffic. Description vrfName Name of the VRF Options delta Displays baselined statistics filter See Filtering show Commands on page 4 Privileged Exec, User Exec...
Page 910: Show Ip Tunnel Reassembly Statistics
JUNOSe 11.1.x Command Reference Guide N to Z show ip tunnel reassembly statistics show ip tunnel reassembly statistics [ detail ] [ all ] [ delta ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information delta keyword added in JUNOSe Release 8.0.0. Displays statistics on the reassembly of fragmented tunnel packets within the current Description virtual router context.
Page 911: Show Ip Tunnel-Route
Chapter 7: S Commands show ip tunnel-route show ip tunnel-route [ vrf vrfName ] [ destination [ ipMask ] [ detail ] ] Syntax [ all ] [ protocol ] [ filter ] Command introduced in JUNOSe Release 7.1.0. Release Information Displays current state of the IPv4 tunnel routing table.
Page 912: Show Ip Udp Statistics
JUNOSe 11.1.x Command Reference Guide N to Z show ip udp statistics show ip udp statistics [ vrfName ] [ delta ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays UDP statistics. Description vrfName Name of the VRF Options delta Displays baselined statistics filter See Filtering show Commands on page 4...
Page 913: Show Ip Vrf
Chapter 7: S Commands show ip vrf show ip vrf [ [ detail ] [ vrfName ] | interfaces [ detail ] ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays information for a specified VRF and its associated interfaces or all VRFs and Description their associated interfaces for the current virtual router context.
Page 914: Show Ip Vrrp
JUNOSe 11.1.x Command Reference Guide N to Z show ip vrrp show ip vrrp [ brief ] [ interface interfaceType interfaceSpecifier [ vrid ] ] [ filter ] Syntax To display summary information: show ip vrrp summary [ filter ] Command introduced before JUNOSe Release 7.1.0.
Page 915: Show Ip Vrrp Neighbor
Chapter 7: S Commands show ip vrrp neighbor show ip vrrp neighbor [ interface interfaceType interfaceSpecifier [ vrid ] ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays summary of all neighbors known to the VRRP router configured on the Description specified interface.
Page 916: Show Ip Vrrp Statistics
JUNOSe 11.1.x Command Reference Guide N to Z show ip vrrp statistics show ip vrrp statistics [ global | [ interface interfaceType interfaceSpecifier [ vrid ] ] Syntax [ delta ] [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information Displays global statistics, interface statistics, or statistics per interface and VRID.
Page 917: Show Ip Vrrp Tracked-Objects
Chapter 7: S Commands show ip vrrp tracked-objects show ip vrrp tracked-objects [ filter ] Syntax Command introduced in JUNOSe Release 7.2.0. Release Information Displays VRRP tracked objects. Description filter See Filtering show Commands on page 4 Options Privileged Exec Mode show ip vrrp tracked-objects...
Page 918: Show Ipsec Ca Identity
JUNOSe 11.1.x Command Reference Guide N to Z show ipsec ca identity show ipsec ca identity { name | all } [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays information for a specific IKE CA identity or for all IKE CA identities that Description are configured on the E Series router and that support the online digital certificate process.
Page 919: Show Ipsec Certificates
Chapter 7: S Commands show ipsec certificates show ipsec certificates { all | crl | peer | public-certs | root-cas } [ hex-format ] Syntax [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information Displays the IKE certificates configured on the E Series router. Description NOTE: This command is replacing the show ike certificates command.
Page 920: Show Ipsec Identity
JUNOSe 11.1.x Command Reference Guide N to Z show ipsec identity show ipsec identity [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the IKE identity configuration. Description NOTE: This command is replacing the show ike identity command. The show ike identity command may be removed completely in a future release.
Page 921: Show Ipsec Ike-Configuration
Chapter 7: S Commands show ipsec ike-configuration show ipsec ike-configuration [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays a summary of the IKE configuration. Description NOTE: This command is replacing the show ike configuration command. The show ike configuration command may be removed completely in a future release.
Page 922: Show Ipsec Ike-Policy-Rule
JUNOSe 11.1.x Command Reference Guide N to Z show ipsec ike-policy-rule show ipsec ike-policy-rule [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays configuration of IKE phase 1 policy rules. Description NOTE: This command is replacing the show ike policy-rule command. The show ike policy-rule command may be removed completely in a future release.
Page 923: Show Ipsec Ike-Sa
Chapter 7: S Commands show ipsec ike-sa show ipsec ike-sa [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays IKE phase 1 SAs running on the router. Description NOTE: This command is replacing the show ike sa command. The show ike sa command may be removed completely in a future release.
Page 924: Show Ipsec Key Mypubkey Rsa
JUNOSe 11.1.x Command Reference Guide N to Z show ipsec key mypubkey rsa show ipsec key mypubkey rsa [ filter ] Syntax Command introduced in JUNOSe Release 7.1.0. Release Information Displays the ISAKMP/IKE public key configured on the router. The public key is Description generated as part of a public/private key pair used to perform RSA authentication for IKE SA negotiations.
Page 925: Show Ipsec Key Pubkey-Chain Rsa
Chapter 7: S Commands show ipsec key pubkey-chain rsa show ipsec key pubkey-chain rsa { summary | address ipAddress | Syntax name identityString } [ filter ] Command introduced in JUNOSe Release 7.1.0. Release Information Displays the ISAKMP/IKE public key that a remote peer uses for RSA authentication Description without the need for a digital certificate.
Page 926: Show Ipsec Lifetime
JUNOSe 11.1.x Command Reference Guide N to Z show ipsec lifetime show ipsec lifetime Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the configured default lifetime of phase II SAs. Description Privileged Exec Mode show ipsec lifetime...
Page 927: Show Ipsec Local-Endpoint
Chapter 7: S Commands show ipsec local-endpoint show ipsec local-endpoint [ transport-virtual-router transportVirtualRouter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the address and transport virtual router of local endpoints. Description transportVirtualRouter Name of virtual router that includes source or destination Options addresses or both assigned to tunnel interfaces Privileged Exec...
Page 928: Show Ipsec Option
JUNOSe 11.1.x Command Reference Guide N to Z show ipsec option show ipsec option Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the dead peer detection (DPD), Network Address Translation Traversal Description (NAT-T) status (enabled or disabled), and invalid cookie transmission status (enabled or disabled) for the current virtual router.
Page 929: Show Ipsec Transform-Set
Chapter 7: S Commands show ipsec transform-set show ipsec transform-set [ transformSetName ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays transform sets configured on the router. Description transformSetName Name of a transform set Options Privileged Exec Mode show ipsec transform-set...
Page 930: Show Ipsec Transport Interface
JUNOSe 11.1.x Command Reference Guide N to Z show ipsec transport interface show ipsec transport interface [ detail ] [ application applicationType ] Syntax [ state { up | down } ] [ interfaceName | [ virtual-router vrName ] destination destAddress | local localAddress ] [ filter ] To display summary information: show ipsec transport interface summary Command introduced before JUNOSe Release 7.1.0.
Page 931: Show Ipsec Transport Profile
Chapter 7: S Commands show ipsec transport profile show ipsec transport profile [ profileName ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the configuration of an IPSec transport profile. Description profileName Name of the profile that you want to display Options Privileged Exec Mode...
Page 932: Show Ipsec Tunnel
JUNOSe 11.1.x Command Reference Guide N to Z show ipsec tunnel show ipsec tunnel [ tunnelName | [ virtual-router vrName ] ip ipAddress ] Syntax [ state { adminState | operStatus } ] [ filter ] [ detail ] [ delta ] To display summary information: show ipsec tunnel summary [ filter ] Command introduced before JUNOSe Release 7.1.0.
Page 933: Show Ipsec Tunnel Profile
Chapter 7: S Commands show ipsec tunnel profile show ipsec tunnel profile [ detail ] [ profileName ] [ filter ] Syntax Command introduced in JUNOSe Release 7.3.0. Release Information Displays information about all existing IPSec tunnel profiles or the specified tunnel Description profile.
Page 934: Show Ipv6
JUNOSe 11.1.x Command Reference Guide N to Z show ipv6 show ipv6 [ vrf vrfName ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information vrf keyword and vrfName variable added in JUNOSe Release 7.2.0. Displays general information for IPv6. Description vrfName Name of the VRF Options...
Page 935: Show Ipv6 Access-List
Chapter 7: S Commands show ipv6 access-list show ipv6 access-list [ accessListName ] [ detail ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays access list information about the specified IPv6 access list. Description accessListName Name of the access list Options detail Displays detailed information about the access list filter See Filtering show Commands on page 4...
Page 936: Show Ipv6 Address
JUNOSe 11.1.x Command Reference Guide N to Z show ipv6 address show ipv6 address [ vrf vrfName ] [ brief | detail ] localAddress Syntax Command introduced before JUNOSe Release 7.1.0. Release Information vrf keyword and vrfName variable added in JUNOSe Release 7.2.0. Displays interface information for the specified IPv6 address.
Page 937: Show Ipv6 Dhcpv6-Local Binding
Chapter 7: S Commands show ipv6 dhcpv6-local binding show ipv6 dhcpv6-local binding [ ipv6Prefix ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the mapping between the token or enduring IPv6 prefix and the DHCP Description unique ID (DUID) of the client computer.
Page 938: Show Ipv6 Dhcpv6-Local Dns-Domain-Searchlist
JUNOSe 11.1.x Command Reference Guide N to Z show ipv6 dhcpv6-local dns-domain-searchlist show ipv6 dhcpv6-local dns-domain-searchlist [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the DHCPv6 local server’s DNS search list. Description filter See Filtering show Commands on page 4 Options Privileged Exec Mode...
Page 939: Show Ipv6 Dhcpv6-Local Dns-Servers
Chapter 7: S Commands show ipv6 dhcpv6-local dns-servers show ipv6 dhcpv6-local dns-servers [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays DNS servers that are configured on the DHCPv6 local server. Description filter See Filtering show Commands on page 4 Options Privileged Exec Mode...
Page 940: Show Ipv6 Dhcpv6-Local Prefix-Lifetime
JUNOSe 11.1.x Command Reference Guide N to Z show ipv6 dhcpv6-local prefix-lifetime show ipv6 dhcpv6-local prefix-lifetime [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the DHCPv6 default prefix lifetime. Description filter See Filtering show Commands on page 4 Options Privileged Exec Mode...
Page 941: Show Ipv6 Dhcpv6-Local Statistics
Chapter 7: S Commands show ipv6 dhcpv6-local statistics show ipv6 dhcpv6-local statistics [ delta ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays statistics for the DHCPv6 local server. Description delta Displays baselined statistics Options filter See Filtering show Commands on page 4 Privileged Exec Mode...
Page 942: Show Ipv6 Forwarding-Table Slot
JUNOSe 11.1.x Command Reference Guide N to Z show ipv6 forwarding-table slot show ipv6 forwarding-table slot slotNumber Syntax Command introduced in JUNOSe Release 7.1.0. Release Information Displays information about routing table memory, load errors, and status for the Description IPv6 forwarding table of a specific line module. slotNumber Number of the slot containing the line module Options Privileged Exec, User Exec...
Page 943: Show Ipv6 Interface
Chapter 7: S Commands show ipv6 interface show ipv6 interface [ vrf vrfName ] [ brief | detail ] Syntax [ interfaceType interfaceSpecifier ][ delta ] [ filter ] To display summary information: show ipv6 interface summary [ vrf vrfName ] [ filter ] Command introduced before JUNOSe Release 7.1.0.
Page 944: Show Ipv6 Local Pool
JUNOSe 11.1.x Command Reference Guide N to Z show ipv6 local pool show ipv6 local pool [ poolName | statistics [ delta ] ] [ filter ] Syntax Command introduced in JUNOSe Release 10.1.0. Release Information Displays information for all IPv6 local address pools configured on a virtual router, Description a particular IPv6 local address pool, or the IPv6 local address pool statistics for DHCPv6 prefix delegation.
Page 945: Show Ipv6 Mld
Chapter 7: S Commands show ipv6 mld show ipv6 mld [ delta ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays MLD information for a virtual router. Description delta Displays baselined statistics Options filter See Filtering show Commands on page 4 Privileged Exec, User Exec Mode show ipv6 mld...
Page 946: Show Ipv6 Mld Groups
JUNOSe 11.1.x Command Reference Guide N to Z show ipv6 mld groups show ipv6 mld groups [ count ] [ groupAddress ] Syntax [ interfaceType interfaceSpecifier ] [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about statically joined and directly connected groups learned Description through MLD.
Page 947: Show Ipv6 Mld Membership
Chapter 7: S Commands show ipv6 mld membership show ipv6 mld membership [ groupAddress ] [ tracked ] Syntax [ interfaceType interfaceSpecifier ] [ filter ] Command introduced in JUNOSe Release 8.2.0. Release Information Displays MLD membership information for multicast groups and (S, G) channels. Description groupAddress Address of the group whose membership information you want Options...
Page 948: Show Ipv6 Mld Interface
JUNOSe 11.1.x Command Reference Guide N to Z show ipv6 mld interface show ipv6 mld interface [ brief | count ] [ delta ] Syntax [ interfaceType interfaceSpecifier ] [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information Displays MLD information for interfaces on which you enabled MLD.
Page 949: Show Ipv6 Mld Mapped-Oif
Chapter 7: S Commands show ipv6 mld mapped-oif show ipv6 mld mapped-oif [ interfaceType interfaceSpecifier ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the current mappings to all mapped outgoing interfaces or to the specified Description outgoing interface.
Page 950: Show Ipv6 Mld Oif-Map
JUNOSe 11.1.x Command Reference Guide N to Z show ipv6 mld oif-map show ipv6 mld oif-map [ mapName ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays all outgoing interface (OIF) maps or the OIF map for the specified interface. Description mapName Outgoing interface multicast map name Options...
Page 951: Show Ipv6 Mld Oif-Mapping
Chapter 7: S Commands show ipv6 mld oif-mapping show ipv6 mld oif-mapping mapName [ groupAddress [ sourceAddress ] ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the mapped OIF to be assigned to a given map name, group address, and Description source address.
Page 952: Show Ipv6 Mld-Proxy
JUNOSe 11.1.x Command Reference Guide N to Z show ipv6 mld-proxy show ipv6 mld-proxy [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays MLD proxy parameters on a virtual router. Description filter See Filtering show Commands on page 4 Options Privileged Exec, User Exec Mode...
Page 953: Show Ipv6 Mld-Proxy Groups
Chapter 7: S Commands show ipv6 mld-proxy groups show ipv6 mld-proxy groups [ count ] [ groupAddress ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about multicast groups that MLD proxy interfaces reported. Description count Displays the number of groups that MLD proxy reported Options...
Page 954: Show Ipv6 Mld-Proxy Interface
JUNOSe 11.1.x Command Reference Guide N to Z show ipv6 mld-proxy interface show ipv6 mld-proxy interface [ brief ] [ delta ] [ interfaceType interfaceSpecifier ] Syntax [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about the interface on which you configured MLD proxy. Description brief Displays summarized information Options...
Page 955: Show Ipv6 Mld Ssm-Mapping
Chapter 7: S Commands show ipv6 mld ssm-mapping show ipv6 mld ssm-mapping [ groupAddress ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the SSM mapping state and the source list mapping associated with a Description multicast group address.
Page 956: Show Ipv6 Mroute
JUNOSe 11.1.x Command Reference Guide N to Z show ipv6 mroute show ipv6 mroute [ groupIpAddress [ sourceIpAddress ] ] Syntax [ summary | count | statistics ] [ active [ bandwidth ] ] [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information active keyword added in JUNOSe Release 8.1.0.
Page 957: Show Ipv6 Multicast Protocols
Chapter 7: S Commands show ipv6 multicast protocols show ipv6 multicast protocols [ brief ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about the multicast protocols enabled on the router. Description brief Displays a summary rather than detailed information Options filter See Filtering show Commands on page 4 Privileged Exec, User Exec...
Page 958: Show Ipv6 Multicast Routing
JUNOSe 11.1.x Command Reference Guide N to Z show ipv6 multicast routing show ipv6 multicast routing [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about the status of multicast routing on the router. Description filter See Filtering show Commands on page 4 Options Privileged Exec, User Exec...
Page 959: Show Ipv6 Neighbors
Chapter 7: S Commands show ipv6 neighbors show ipv6 neighbors [ vrf vrfName ] [ ipv6Address ] [ interfaceType interfaceSpecifier Syntax [ static | dynamic | summary ] [ filter ] show ipv6 neighbors summary [ vrf vrfName ] [ filter ] Command introduced before JUNOSe Release 7.1.0.
Page 960: Show Ipv6 Ospf
JUNOSe 11.1.x Command Reference Guide N to Z show ipv6 ospf show ipv6 ospf [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays general information about OSPFv3 routing processes. Description filter See Filtering show Commands on page 4 Options Privileged Exec, User Exec Mode...
Page 961: Show Ipv6 Ospf Border-Routers
Chapter 7: S Commands show ipv6 ospf border-routers show ipv6 ospf border-routers [ vrf vrfName ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays IPv6 routing table entries for area border and AS boundary routers. Description vrfName Name of the VRF Options...
Page 962: Show Ipv6 Ospf Database
JUNOSe 11.1.x Command Reference Guide N to Z show ipv6 ospf database show ipv6 ospf database [ vrf vrfName ] [ database-summary | { router | Syntax intra-area-prefix | link | network | inter-area-net | inter-area-router | external | grace } [ advRouterId ] ] [ filter ] Command introduced before JUNOSe Release 7.1.0.
Page 963: Show Ipv6 Ospf Internal-Statistics
Chapter 7: S Commands show ipv6 ospf internal-statistics show ipv6 ospf internal-statistics [ delta ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays internal OSPFv3 statistics. Description delta Displays baselined information Options filter See Filtering show Commands on page 4 Privileged Exec, User Exec Mode show ipv6 ospf internal-statistics...
Page 964: Show Ipv6 Ospf Interface
JUNOSe 11.1.x Command Reference Guide N to Z show ipv6 ospf interface show ipv6 ospf [ areaId | areaIdInt ] interface Syntax [ interfaceType interfaceSpecifier ] [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information Displays a list of OSPFv3 interfaces. Description areaId OSPF area ID in IP address format Options...
Page 965: Show Ipv6 Ospf Neighbors
Chapter 7: S Commands show ipv6 ospf neighbors show ipv6 ospf [ areaId | areaIdInt ] neighbors [ neighborAddress ] Syntax [ interfaceType interfaceSpecifier ] [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information Displays a list of OSPFv3 neighbors. Description areaId OSPF area ID in IP address format Options...
Page 966: Show Ipv6 Ospf Summary-Prefix
JUNOSe 11.1.x Command Reference Guide N to Z show ipv6 ospf summary-prefix show ipv6 ospf summary-prefix [ vrfName ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays summary prefixes configured to summarize externals. Description vrfName Name of the VRF Options filter See Filtering show Commands on page 4 Privileged Exec, User Exec...
Page 967: Show Ipv6 Ospf Traffic
Chapter 7: S Commands show ipv6 ospf traffic show ipv6 ospf traffic [ delta ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays OSPFv3 packet statistics. Description delta Displays baselined information Options filter See Filtering show Commands on page 4 Privileged Exec, User Exec Mode show ipv6 ospf traffic...
Page 968: Show Ipv6 Pim
JUNOSe 11.1.x Command Reference Guide N to Z show ipv6 pim show ipv6 pim Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays general PIM router-level information. Description Privileged Exec, User Exec Mode show ipv6 pim...
Page 969: Show Ipv6 Pim Bsr
Chapter 7: S Commands show ipv6 pim bsr show ipv6 pim bsr [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays BSR information and the group prefixes for which the local router is a C-RP Description in a PIM sparse mode environment.
Page 970: Show Ipv6 Pim Interface
JUNOSe 11.1.x Command Reference Guide N to Z show ipv6 pim interface show ipv6 pim interface Syntax { summary | [ interfaceType interfaceSpecifier ] [ detail | count ] [ filter ] } Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about each PIM IPv6 interface.
Page 971: Show Ipv6 Pim Neighbor
Chapter 7: S Commands show ipv6 pim neighbor show ipv6 pim neighbor [ interfaceType interfaceSpecifier ] [ detail ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about each PIM IPv6 neighbor that the router has discovered. Description interfaceType Interface type;...
Page 972: Show Ipv6 Pim Remote-Neighbor
JUNOSe 11.1.x Command Reference Guide N to Z show ipv6 pim remote-neighbor show ipv6 pim remote-neighbor [ ipv6Address ] [ count ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about all PIM IPv6 remote neighbors or the specified IPv6 Description remote neighbor.
Page 973: Show Ipv6 Pim Rp
Chapter 7: S Commands show ipv6 pim rp show ipv6 pim rp { groupAddress | mapping } [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about PIM IPv6 group-to-RP mappings. Description groupAddress IPv6 address of a group for which you want to view group-to-RP Options mappings mapping Displays all group-to-RP mappings that the router has recorded...
Page 974: Show Ipv6 Pim Rp-Hash
JUNOSe 11.1.x Command Reference Guide N to Z show ipv6 pim rp-hash show ipv6 pim rp-hash groupAddress [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays which RP an IPv6 multicast group is using. Description groupAddress IPv6 address of multicast group for which you want to view the RP Options filter See Filtering show Commands on page 4 Privileged Exec, User Exec...
Page 975: Show Ipv6 Pim Sparse-Mode Sg-State
Chapter 7: S Commands show ipv6 pim sparse-mode sg-state show ipv6 pim sparse-mode sg-state Syntax [ group groupAddress [ source sourceAddress ] | rp rpAddress ] [ count ] [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information Displays information for each SG entry that PIM sparse mode knows about.
Page 976: Show Ipv6 Pim Sparse-Mode Unicast-Route
JUNOSe 11.1.x Command Reference Guide N to Z show ipv6 pim sparse-mode unicast-route show ipv6 pim sparse-mode unicast-route [ routeAddress routeMask | ipv6Prefix ] Syntax [ count ] [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information Displays the IPv6 unicast routes that PIM sparse mode is using. Description routeAddress IPv6 address associated with a unicast route Options...
Page 977: Show Ipv6 Pim Spt-Threshold
Chapter 7: S Commands show ipv6 pim spt-threshold show ipv6 pim spt-threshold [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the threshold for switching to the shortest-path-tree at a PIM designated Description router. filter See Filtering show Commands on page 4 Options Privileged Exec, User Exec Mode...
Page 978: Show Ipv6 Prefix-List
JUNOSe 11.1.x Command Reference Guide N to Z show ipv6 prefix-list show ipv6 prefix-list Syntax [ listName [ seq seqNum | ipv6Prefix [ longer | first-match ] ] ] [ filter ] To display summary or detailed information: show ipv6 prefix-list { summary | detail } [ listName ] [ filter ] Command introduced before JUNOSe Release 7.1.0.
Page 979: Show Ipv6 Profile
Chapter 7: S Commands show ipv6 profile show ipv6 profile profileName [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the IPv6 profile configuration. Description profileName Name of the profile you want to display Options filter See Filtering show Commands on page 4 Privileged Exec, User Exec Mode show ipv6 profile...
Page 980: Show Ipv6 Protocols
JUNOSe 11.1.x Command Reference Guide N to Z show ipv6 protocols show ipv6 protocols [ vrf vrfName ] [ summary ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information vrf keyword and vrfName variable added in JUNOSe Release 7.2.0. Displays detailed information about IPv6 protocols currently configured on the router.
Page 981: Show Ipv6 Redistribute
Chapter 7: S Commands show ipv6 redistribute show ipv6 redistribute [ vrf vrfName ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information vrf keyword and vrfName variable added in JUNOSe Release 7.2.0. Displays configured IPv6 route redistribution policy. Description vrfName Name of the VRF Options...
Page 982: Show Ipv6 Route
JUNOSe 11.1.x Command Reference Guide N to Z show ipv6 route show ipv6 route [ vrf vrfName ] [ ipv6Address [ detail ] | ipv6Prefix [ detail ] ] [ all ] Syntax [ protocol ] [ filter ] To display summary information: show ipv6 route summary [ vrf vrfName ] [ filter ] Command introduced before JUNOSe Release 7.1.0.
Page 983 Chapter 7: S Commands static Displays the best static routes added by network management to the routing table static-rpf Displays the best static RPF routes added by network management to the routing table filter See Filtering show Commands on page 4 summary Displays summary counters for all routes in the IPv6 routing table Privileged Exec, User Exec Mode...
Page 984: Show Ipv6 Routers
JUNOSe 11.1.x Command Reference Guide N to Z show ipv6 routers show ipv6 routers [ vrf vrfName ] [ interfaceType interfaceSpecifier ] [ ipv6Address ] Syntax [ conflicts ] [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information vrf keyword and vrfName variable added in JUNOSe Release 7.2.0.
Page 985: Show Ipv6 Rpf-Route
Chapter 7: S Commands show ipv6 rpf-route show ipv6 rpf-route [ vrf vrfName ] [ ipv6Address [ detail ] | ipv6Prefix [ detail ] ] Syntax [ all ] [ protocol ] [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information vrf keyword and vrfName variable added in JUNOSe Release 7.2.0.
Page 986 JUNOSe 11.1.x Command Reference Guide N to Z static Displays the best static routes added by network management to the routing table static-rpf Displays the best static RPF routes added by network management to the routing table filter See Filtering show Commands on page 4 Privileged Exec, User Exec Mode show ipv6 rpf-route...
Page 987: Show Ipv6 Static
Chapter 7: S Commands show ipv6 static show ipv6 static [ vrf vrfName ] [ ipv6Prefix [ all ] ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information vrf keyword and vrfName variable added in JUNOSe Release 7.2.0. Displays general status information for static routes added by network management Description to the routing table.
Page 988: Show Ipv6 Traffic
JUNOSe 11.1.x Command Reference Guide N to Z show ipv6 traffic show ipv6 traffic [ vrf vrfName ] [ delta ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information vrf keyword and vrfName variable added in JUNOSe Release 7.2.0. Displays statistics about IPv6 traffic.
Page 989: Show Ipv6 Tunnel-Route
Chapter 7: S Commands show ipv6 tunnel-route show ipv6 tunnel-route [ vrf vrfName ] [ ipv6Address [ detail ] | ipv6Prefix [ detail ] ] Syntax [ all ] [ protocol ] [ filter ] Command introduced in JUNOSe Release 7.1.0. Release Information vrf keyword and vrfName variable added in JUNOSe Release 7.2.0.
Page 990: Show Ipv6 Udp Statistics
JUNOSe 11.1.x Command Reference Guide N to Z show ipv6 udp statistics show ipv6 udp statistics [ vrf vrfName ] [ delta ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information vrf keyword and vrfName variable added in JUNOSe Release 7.2.0. Displays IPv6 UDP statistics.
Page 991: Show Isis Database
Chapter 7: S Commands show isis database show isis database [ level-1 | level-2 | l1 | l2 | lspid | hostname | detail | verbose ]* Syntax [ filter ] Command introduced before JUNOSe Release 7.1.0. Release Information hostname variable added in JUNOSe Release 7.3.0. Displays the IS-IS link-state database.
Page 992: Show Isis Mpls Adjacency-Log
JUNOSe 11.1.x Command Reference Guide N to Z show isis mpls adjacency-log show isis mpls [ traffic-eng ] adjacency-log [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays a log of the last 20 IS-IS adjacency changes. Description traffic-eng Specifies optional keyword for compatibility with non–E Series Options...
Page 993: Show Isis Mpls Advertisements
Chapter 7: S Commands show isis mpls advertisements show isis mpls [ traffic-eng ] advertisements [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays the last record flooded from MPLS. Description traffic-eng Specifies optional keyword for compatibility with non–E Series Options implementations filter See Filtering show Commands on page 4...
Page 994: Show Isis Mpls Tunnel
JUNOSe 11.1.x Command Reference Guide N to Z show isis mpls tunnel show isis mpls [ traffic-eng ] tunnel [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about tunnels used in the calculation of IS-IS next hops. Description traffic-eng Specifies optional keyword for compatibility with non–E Series Options...
Page 995: Show Isis Nsf
Chapter 7: S Commands show isis nsf show isis nsf Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about the configured and operational settings on the router for Description IS-IS graceful restart. Graceful restart is also known as nonstop forwarding (NSF). Privileged Exec, User Exec Mode show isis nsf...
Page 996: Show Isis Spf-Log
JUNOSe 11.1.x Command Reference Guide N to Z show isis spf-log show isis spf-log [ detail ] [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays how often and why the router has run a full SPF calculation. Description detail Displays the time it takes to perform the route table update and the time Options...
Page 997: Show Isis Summary-Addresses
Chapter 7: S Commands show isis summary-addresses show isis summary-addresses [ filter ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays aggregate address information for IS-IS. Description filter See Filtering show Commands on page 4 Options Privileged Exec, User Exec Mode show isis summary-addresses...
Page 998: Show Isis Topology
JUNOSe 11.1.x Command Reference Guide N to Z show isis topology show isis topology [ [ level-1 | level-2 | l1 | l2 ]* [ nsap ] Syntax [ level-1 | level-2 | l1 | l2 ]* ] [ filter ] Command introduced before JUNOSe Release 7.1.0.
Page 999: Show Issu
Chapter 7: S Commands show issu show issu [ brief | detail ] [ filter ] Syntax Command introduced in JUNOSe Release 9.0.0. Release Information Displays the current status of unified ISSU operation. Description brief Displays hardware and software criteria required for unified ISSU to begin Options and whether criteria are met detail Displays detailed information about unified ISSU status and warnings in...
Page 1000: Show L2C
JUNOSe 11.1.x Command Reference Guide N to Z show l2c show l2c Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about the ANCP configuration on the router. Description Privileged Exec Mode show l2c...
Page 1001: Show L2C Discovery-Table
Chapter 7: S Commands show l2c discovery-table show l2c discovery-table [ neighbor neighborName ] [ end-user-id userIdString ] Syntax [ brief ] Command introduced in JUNOSe Release 7.2.0. Release Information Displays information about ANCP discovery table entries. Description neighborName Name of the neighbor for which you want to view ANCP discovery Options table information userIdString ID of the neighbor for which you want to view ANCP discovery...

This manual is also suitable for:

Junose 11.1.x