Ip Dhcp-Local Unique-Client-Ids - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ip dhcp-local unique-client-ids

[ no ] ip dhcp-local unique-client-ids
Syntax
Command introduced in JUNOSe Release 8.0.0.
Release Information
Configures the method that DHCP local server uses when it receives a DHCP
Description
DISCOVER or REQUEST packet from a client ID or hardware address that matches
the client ID or hardware address of a currently bound client on another subnet or
subinterface.
Use this command to specify that DHCP local server uses a method that considers
a request from a client with a duplicate client ID or hardware address to be from a
roaming client the server then terminates the currently bound client's existing lease
and assigns a new address to the requesting client.
The no version restores the default behavior, in which DHCP local server uses the
DHCP client's subnet or subinterface to differentiate between two clients that use
the same client ID or hardware address the DHCP server processes requests in the
normal manner.
NOTE: This command replaces the ip dhcp-local inhibit-roaming command, which
has been removed from the CLI.
Global Configuration
Mode
778
ip dhcp-local unique-client-ids