Frame-Relay Description - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

frame-relay description

frame-relay description name
Syntax
no frame-relay description
Command introduced before JUNOSe Release 7.1.0.
Release Information
Assigns a text description or an alias to a Frame Relay interface or subinterface. Use
Description
the show frame-relay interface or show frame-relay subinterface command to display
the text description. The no version removes the description or alias.
Options
Interface Configuration, Subinterface Configuration
Mode
642
frame-relay description
name Text string or alias of up to 80 characters for the Frame Relay interface
or subinterface