Frame-Relay Lmi-N393Dte - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

frame-relay lmi-n393dte

frame-relay lmi-n393dte events
Syntax
no frame-relay lmi-n393dte
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets the monitored event count (N393) on a DTE interface. The no version removes
Description
current setting and sets the default.
Options
Interface Configuration
Mode
652
frame-relay lmi-n393dte
events Number in the range 1–10 events; default value is 4 events; specifies
the diagnostic window used to verify link integrity (the detection of N392 errors
within the window of N393 samples places the interface in an operationally
down state)