Match Tag - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

match tag

match tag tagValue [ tagValue ]*
Syntax
no match tag [ tagValue ]*
Command introduced before JUNOSe Release 7.1.0.
Release Information
Matches the tag value of the destination routing protocol. The no version removes
Description
the match clause from a route map unless you specify a value, in which case only
that value is removed from the match clause.
Options
Policy List Configuration, Route Map Configuration
Mode
1292
match tag
tagValue Number in the range 0–4294967295
* Indicates that one or more parameters can be repeated multiple times in a
list in the command line