Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual page 531

warning or 4 Warning condition
notice or 5 Normal but significant condition
info or 6 Informational message
debug or 7 Debug message
verbosityLevel Verbosity of the log category's messages; can be any of the
following:
low Terse
medium Moderate detail
high Verbose
switchState Switches from one type of tree to another
rpt-switch Switch from a shortest-path tree to a shared path tree
spt-switch Switch from a shared-path tree to a shortest path tree
groupAddress IP address of the multicast group
sourceAddress IP address of the multicast source
on Turns on the specified PIM mode on all virtual routers
off Turns off the specified PIM mode on all virtual routers
sg-state Displays information about the relationship between a source, multicast
group, and RP router
rp Displays information about the relationships between sources, groups, and
the specified RP router
rpAddress Address of the RP router
count Displays one of the following
(with no optional keywords) number of relationships between a source,
multicast group, and RP router
(with the group keyword) number of sources associated with the multicast
group for PIM sparse mode
(with the source and group keywords) number of source-group pairs for PIM
sparse mode
(with the rp keyword) number of source-group pairs associated with the RP
router for PIM sparse mode
Privileged Exec
Mode
Chapter 5: D Commands
489
debug ip pim