Ipv6 Ospf Network - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

Chapter 10: I Commands

ipv6 ospf network

ipv6 ospf [ processId ] network { broadcast | point-to-point }
Syntax
no ipv6 ospf [ processId ] network
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies a network type (broadcast or point-to-point) for an interface. The no version
Description
resets the path cost to the default.
processId Integer in the range 1–65535
Options
Interface Configuration, Subinterface Configuration
Mode
1085
ipv6 ospf network