Committed-Action - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

committed-action

For IP and IPv6 rate-limit profiles:
Syntax
[ no ] committed-action { drop | transmit | mark markVal }
For L2TP rate-limit profiles:
[ no ] committed-action { drop | transmit }
For MPLS rate-limit profiles:
[ no ] committed-action { drop | transmit | mark-exp expValue }
For hierarchical rate-limit profiles:
[ no ] committed-action { drop | transmit [ conditional | unconditional | final ] }
Command introduced before JUNOSe Release 7.1.0.
Release Information
conditional, unconditional, and final keywords added in JUNOSe Release 7.2.0.
Sets the action for packets conforming to the committed rate and committed burst
Description
size and conforming to the exceed rate and exceed burst size for a rate-limit profile.
The no version restores the value to the default value, drop.
Options
Rate Limit Profile Configuration
Mode
Related Topics
drop Drops the packet
transmit Transmits the packet; for hierarchical rate limits:
conditional Packets must pass the next rate limit
unconditional Packets take resources, but are not affected by the rest of
the hierarchy
final Packets exit the hierarchy at rate limit
markVal Value in the range 0–255
expValue EXP bit value in the range 0–7
Creating a Two-Rate Rate-Limit Profile
Chapter 4: C Commands
445
committed-action