Ethernet Oam Lfm Pdu-Lost-Threshold - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ethernet oam lfm pdu-lost-threshold

[ no ] ethernet oam lfm pdu-lost-threshold pduLostPackets
Syntax
Command introduced in JUNOSe Release 11.1.0.
Release Information
Configures the number of OAM protocol data units (PDUs) that a local OAM client
Description
can fail to receive from a remote peer before a link-fault event is triggered. The no
version removes the configured threshold for PDUs that can be missed from a remote
peer before the generation of a link-fault event.
Options
Interface Configuration
Mode
Related Topics
590
ethernet oam lfm pdu-lost-threshold
pduLostPackets Number of expected OAM packets from the remote peer that
the local OAM client can miss before a link-fault event is triggered; a number in
the range 3–10; default value is 5
OAM Discovery Feature
Configuring 802.3ah OAM Link-Fault Management
ethernet oam lfm mode on page 589