Ipv6 Mld Ssm-Map Static - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

ipv6 mld ssm-map static

[ no ] ipv6 mld ssm-map static accessListName sourceAddress
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies an access list and source address for use in SSM mapping. SSM mapping
Description
statically assigns sources to MLDv1 groups. You must use SSM mapping for MLDv1
hosts to interoperate with PIM SSM. SSM mapping allows the router to use a statically
configured list to translate <*,G> memberships to <S,G> memberships. The no
version removes the SSM map association.
NOTE: To operate correctly, the static source addresses configured with the ipv6
mld ssm-map static command must fall within the configured PIM SSM range.
Options
Privileged Exec, User Exec
Mode
accessListName Name of the access control list
sourceAddress Address of the source
Chapter 10: I Commands
ipv6 mld ssm-map static
1053