Ip Igmp-Proxy Unsolicited-Report-Interval - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ip igmp-proxy unsolicited-report-interval

ip igmp-proxy unsolicited-report-interval tenths-of-a-second
Syntax
no ip igmp-proxy unsolicited-report-interval
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies how often the upstream interface should transmit unsolicited reports. This
Description
command has no effect on interfaces other than the upstream value. The no version
transmits unsolicited reports using the default value, 400 tenths of a second.
NOTE: Issue this command only on the upstream interface. Otherwise, this command
will have no effect.
Options
Interface Configuration
Mode
828
ip igmp-proxy unsolicited-report-interval
tenths-of-a-second Time interval at which the interface transmits unsolicited
reports