Mpls Atm Vpi Range - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

mpls atm vpi range

mpls atm vpi range minVPI maxVPI
Syntax
no mpls atm vpi range
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the range for virtual path identifiers that can be used in MPLS labels for an
Description
MPLS major interface on an ATM AAL5 interface using the interface label space.
Creates the MPLS major interface if it does not yet exist. An error message is
generated if you issue the command for any other layer 2 interface, as they do not
support the interface label space. The no version deletes the range.
Options
Interface Configuration
Mode
1340
mpls atm vpi range
minVPI Lowest virtual path identifier acceptable for a label, a value in the range
0–255
maxVPI Highest virtual path identifier acceptable for a label, a value in the
range 0–255