Configure - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

configure

configure [ terminal | file [ fileName ] [ verbose | show-progress [ dotPeriod ] ] ]
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Enters Global Configuration mode. There is no no version.
Description
NOTE: This command is not allowed for a short time after a warm restart (warm
switchover) occurs. This behavior allows some applications time to complete their
warm-restart initialization. However, if the warm-restart does not complete in 5
minutes, the warm-start is cancelled and configuration access is restored.
Options
Privileged Exec
Mode
452
configure
terminal Enables manual configuration from a terminal
file Configures the router from a script file
fileName Script file to execute
verbose Echoes each command as the script is executed
show-progress Displays a '.' during script execution
dotPeriod Number of commands executed before a '.' is displayed; default value
is 100