Isis Hello-Interval - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

isis hello-interval

isis hello-interval seconds [ level-1 | level-2 ]
Syntax
no isis hello-interval [ seconds ] [ level-1 | level-2 ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the length of time in seconds between hello packets that the router sends
Description
on the specified interface. The no version restores the default value.
Options
Interface Configuration, Subinterface Configuration
Mode
1126
isis hello-interval
seconds Time (in the range 0–65535 seconds) equal to the hello multiplier times
the hello interval seconds; default value is 10 seconds.
level-1 Sets the hello interval for level 1 independently
level-2 Sets the hello interval for level 2 independently