L2Tp Disable Calling-Number-Avp - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

l2tp disable calling-number-avp

[ no ] l2tp disable calling-number-avp
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Prevents the E Series LAC from sending the Calling Number attribute value pair (AVP)
Description
in incoming-call-request (ICRQ) packets. The no version enables sending of the Calling
Number AVP, the default setting.
Global Configuration
Mode
1170
l2tp disable calling-number-avp