Match Ip Next-Hop - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

match ip next-hop

match ip next-hop { accessListName [ accessListName ]* |
Syntax
prefix-list prefixListName [ prefixListName ]* | prefix-tree treeName [ treeName ]* }
no match ip next-hop [ accessListNumber ]* | prefix-list [ listName ]* |
prefix-tree [ treeName ]*
Command introduced before JUNOSe Release 7.1.0.
Release Information
Matches any routes that have a next-hop router address passed by the specified
Description
access list, prefix list, or prefix tree. You cannot mix references in the same match
command; you can only specify either access list(s), prefix list(s), or prefix tree(s).
The no version removes the match clause from a route map unless you specify a
value, in which case only that value is removed from the match clause.
Options
Policy List Configuration, Route Map Configuration
Mode
accessListName—Name of a single standard access list; string of up to 32
characters
prefixListName—Name of a single prefix list; string of up to 32 characters
treeName—Name of a single prefix tree; string of up to 32 characters
* Indicates that one or more parameters can be repeated multiple times in a
list in the command line
Chapter 13: M Commands
1281
match ip next-hop