Ipv6 Dhcpv6-Local Prefix-Lifetime - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

ipv6 dhcpv6-local prefix-lifetime

ipv6 dhcpv6-local prefix-lifetime { days [ hours [ minutes [ seconds ] ] ] | infinite }
Syntax
no ipv6 dhcpv6-local prefix-lifetime
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets the default lifetime for which a prefix delegated by this DHCPv6 local server is
Description
valid. This default is overridden by the interface-specific lifetime. The no version
restores the default lifetime to 1 day.
Options
Global Configuration
Mode
days Number of days in the lifetime; in the range 0–32768
hours Number of hours in the lifetime; in the range 0–24
minutes Number of minutes in the lifetime; in the range 0–60
seconds Number of seconds in the lifetime; in the range 0–60
infinite Assigns a lifetime that does not expire
Chapter 10: I Commands
ipv6 dhcpv6-local prefix-lifetime
1025