Ipv6 Mld Explicit-Tracking - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ipv6 mld explicit-tracking

[ no ] ipv6 mld explicit-tracking [ disable-if-mld-v1-detected ]
Syntax
Command introduced in JUNOSe Release 8.2.0.
Release Information
Enables explicit host tracking for IPv6 MLD interfaces. The no version disables explicit
Description
host tracking on the interface or with the disable-if-mld-v1-detected keyword
reverts to the default explicit host tracking.
Options
Interface Configuration, Profile Configuration
Mode
1040
ipv6 mld explicit-tracking
disable-if-mld-v1-detected Disables explicit host tracking if MLD V1 hosts
detected on MLD V2 interfaces