Table of Contents
Advertisement
JUNOSe 11.1.x Command Reference Guide A to M
match distance
match distance distance [ distance ]*
Syntax
no match distance [ distance ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Matches any routes that have the specified administrative distance. The no version
Description
removes the match clause from a route map unless you specify a value, in which
case only that value is removed from the match clause.
NOTE: Matching a distance is useful only when applied to a route being redistributed
out of a routing table. Distance is used to determine the relative preference between
routes to the same prefix in order to pick the best route to that prefix in the routing
table. Distance has no meaning in any other circumstance and any attempt to match
distance will fail.
Options
Policy List Configuration, Route Map Configuration
Mode
1278
match distance
distance—Administrative distance in the range 0–255
* Indicates that one or more parameters can be repeated multiple times in a
list in the command line
Advertisement
Table of Contents
