Match Metric - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

match metric

match metric metricValue [ metricValue ]*
Syntax
no match metric [ metricValue ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Matches a route for the specified metric value. The no version removes the match
Description
clause from a route map unless you specify a value, in which case only that value is
removed from the match clause.
Options
Policy List Configuration, Route Map Configuration
Mode
1286
match metric
metricValue Number in the range 0–4294967295, which indicates the preference
value for a specific route in a route map
* Indicates that one or more parameters can be repeated multiple times in a
list in the command line