Ip Rip Send Version - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

ip rip send version

Syntax
Release Information
Description
Options
Mode
922
ip rip send version { 1 | 2 | 1 2 | 2 1 | off }
no ip rip send version
Command introduced before JunosE Release 7.1.0.
Restricts the RIP version that the router can send on an interface. The no version sets
the interface back to the default value, sending only RIP version 1.
1—Specifies RIP version 1 only
2—Specifies RIP version 2 only
1 2—Specifies RIP version 1 and version 2
2 1—Specifies RIP version 2 and version 1
off—Turns reception off
Interface Configuration, Subinterface Configuration
Copyright © 2010, Juniper Networks, Inc.