L2Tp Rx-Connect-Speed-When-Equal - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

l2tp rx-connect-speed-when-equal

[ no ] l2tp rx-connect-speed-when-equal
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Generates the L2TP receive (RX) speed AVP when the RX and TX speeds are equal.
Description
The no version disables generation of the RX speed AVP when the RX and TX speeds
are equal.
Global Configuration
Mode
1186
l2tp rx-connect-speed-when-equal