Hdlc Down-When-Looped - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

Chapter 9: H Commands

hdlc down-when-looped

[ no ] hdlc down-when-looped
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Enables loopback detection on a Cisco HDLC interface. Loopback detection is disabled
Description
by default. The no version disables loopback detection.
Interface Configuration, Subinterface Configuration
Mode
683
hdlc down-when-looped