Ipv6 Pim Ssm - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

ipv6 pim ssm

ipv6 pim ssm { default | range ipv6AccessList }
Syntax
no ipv6 pim ssm
Command introduced before JUNOSe Release 7.1.0.
Release Information
Enables SSM and defines the SSM range of IPv6 multicast addresses. The no version
Description
disables SSM on the router.
Options
Global Configuration
Mode
default Specifies that SSM use the IANA-specified range of 232/8
ipv6AccessList Name of the IPv6 access list that specifies the range of multicast
addresses you want SSM to use
Chapter 10: I Commands
1101
ipv6 pim ssm