Ipv6 Nd Other-Config-Flag - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ipv6 nd other-config-flag

[ no ] ipv6 nd other-config-flag
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Profile Configuration mode added in JUNOSe Release 9.0.0.
Sets the "other stateful configuration" flag in IPv6 router advertisements. The no
Description
version clears the flag from IPv6 router advertisements.
Interface Configuration, Profile Configuration
Mode
1070
ipv6 nd other-config-flag