Ip Dhcp-Server - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

ip dhcp-server

ip dhcp-server dhcpServerAddress [ adminStatus ]
Syntax
no ip dhcp-server [ dhcpServerAddress [ adminStatus ] ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Adds the IP address of a single DHCP server to the list of DHCP servers from which
Description
the router can request addresses to allocate to remote users. A maximum of five
DHCP servers can be specified. The no version removes the specified DHCP server
or removes all DHCP servers from the list.
Options
Global Configuration
Mode
dhcpServerAddress IP address of the DHCP server that will allocate addresses
for remote users
adminStatus One of the following options:
disable Disables the DHCP server
drain Drains the DHCP server
Chapter 10: I Commands
779
ip dhcp-server