Ipv6 Multicast Admission-Bandwidth-Limit - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

ipv6 multicast admission-bandwidth-limit

[ no ] ipv6 multicast admission-bandwidth-limit limitValue
Syntax
Command introduced in JUNOSe Release 7.1.0.
Release Information
Specifies multicast admission bandwidth (in kilobits per second) for a given interface.
Description
The no version removes the admission bandwidth limit.
Options
Interface Configuration, Profile Configuration
Mode
limitValue—Maximum admission bandwidth (in kilobits per second) permitted
on an interface; default value is 0, which disables the limit
Chapter 10: I Commands
ipv6 multicast admission-bandwidth-limit
1059