L2Tp Drain Destination - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

l2tp drain destination

[ no ] l2tp drain destination { destinationName
Syntax
| [ virtual-router vrName ] ip ipAddress }
Command introduced before JUNOSe Release 7.1.0.
Release Information
Prevents the creation of new tunnels and sessions at a destination. This command
Description
works in conjunction with the l2tp shutdown destination command. Both commands
affect the status of the administrative state of L2TP for the destination; the l2tp drain
destination command sets the administrative state to drain. The no version allows
the creation of new tunnels and sessions at a destination.
Options
Global Configuration
Mode
1174
l2tp drain destination
destinationName Name the router assigns to the LNS
vrName—Name of the virtual router on which the destination exists
ipAddress IP address of the LNS