Chapter 13: M Commands
mpls traffic-eng link-management timers periodic-flooding
mpls traffic-eng link-management timers periodic-flooding frequency
Syntax
no mpls traffic-eng link-management timers periodic-flooding
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the interval at which bandwidth values are flooded to the entire network.
Description
Configuring a value of 0 turns off flooding. The no version restores the default value,
180.
frequency Interval in seconds, a value in the range 0–3600
Options
Global Configuration
Mode
1431
mpls traffic-eng link-management timers periodic-flooding