Monitor Atm Vc - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

monitor atm vc

monitor atm vc atm interfaceSpecifier vcd [ atm interfaceSpecifier vcd ]*
Syntax
[ load-interval seconds ] [ display-time-of-day ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Displays bit rate and packet rate statistics over a specified time interval for one or
Description
more ATM virtual circuits (VCs). There is no no version.
Options
Privileged Exec, User Exec
Mode
interfaceSpecifier—ATM interface specifier; see Interface Types and Specifiers
on page 5
vcd Virtual circuit descriptor that is an identifier for the VC in other commands;
number in the range 1–2147483647
seconds Number of seconds in the range 5–30 that specifies the time interval
at which the router calculates bit rates and packet rates for the specified VC;
default value is 5 seconds
display-time-of-day Sets time at which the router calculates the bit rate and
packet rate statistics for the current interval
* Indicates that one or more parameters can be repeated multiple times in a
list in the command line
Chapter 13: M Commands
1331
monitor atm vc