Ipsec Ike-Policy-Rule - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

ipsec ike-policy-rule

ipsec ike-policy-rule priority
Syntax
no ipsec ike-policy-rule [ priority ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Defines and prioritizes an ISAKMP/IKE policy. ISAKMP/IKE policies define parameters
Description
to be used during ISAKMP/IKE negotiation. You can have up to 10 ISAKMP/IKE policies
per router. The no version removes a policy. If you do not include a priority number
with the no version, the software removes all ISAKMP/IKE policies.
NOTE: This command is replacing the ipsec isakmp-policy-rule command. The ipsec
isakmp-policy-rule command may be removed completely in a future release.
Options
Global Configuration
Mode
priority Identifies and prioritizes the ISAKMP/IKE policy; in the range 1 to
10000, with 1 having the highest priority
Chapter 10: I Commands
999
ipsec ike-policy-rule