Mark-De - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

mark-de

[ no ] [ suspend ] mark-de deValue
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Marks the DE bit in the Frame Relay header of packets matching the current classifier
Description
control list. The no version removes the mark rule from a policy list; the suspend
version temporarily suspends a mark rule; the no suspend version resumes
application of a suspended rule.
NOTE: This command replaces the Policy List Configuration version of the mark-de
command, which may be removed completely in a future release.
Options
Classifier Group Configuration
Mode
Related Topics
deValue Value of the DE bit; 0 or 1
Assigning Values to the ATM CLP Bit
Policy Rule Precedence
Chapter 13: M Commands
1269
mark-de