L2Tp Disconnect-Cause - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

l2tp disconnect-cause

[ no ] l2tp disconnect-cause
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Enables an E Series LNS to generate, for all L2TP sessions, a PPP Disconnect Cause
Description
Code attribute value pair (AVP) and include it in all L2TP Call-Disconnect-Notify (CDN)
messages that it sends to an LAC. This action provides a mechanism for the LAC to
obtain information about the cause of a session disconnection. The no version disables
generation of the PPP Disconnect Cause Code AVP, which is the default setting.
Global Configuration
Mode
1172
l2tp disconnect-cause