Ip Dhcp-Local Excluded-Address - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ip dhcp-local excluded-address

[ no ] ip dhcp-local excluded-address ipAddressStart ipAddressStop
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies IP addresses that the DHCP local server should not supply from the default
Description
address pool because those addresses are already used by devices on the subnet.
The no version allows the DHCP local server to supply the specified IP address.
Options
Global Configuration
Mode
774
ip dhcp-local excluded-address
ipAddressStart Single IP address or start of the range of IP addresses that the
DHCP local server should not supply
ipAddressStop End of the range of IP addresses that the DHCP local server
should not supply