Ipv6 Nd Ra-Lifetime - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ipv6 nd ra-lifetime

ipv6 nd ra-lifetime seconds
Syntax
no ipv6 nd ra-lifetime
Command introduced before JUNOSe Release 7.1.0.
Release Information
Profile Configuration mode added in JUNOSe Release 9.0.0.
Specifies the router lifetime value in IPv6 router advertisements on an interface. The
Description
router lifetime value is the amount of time the router is considered the default router
on this interface. The no version restores the default router lifetime value, 1800
seconds.
Options
Interface Configuration, Profile Configuration
Mode
1074
ipv6 nd ra-lifetime
seconds Number of seconds this router is considered the default router on this
interface; in the range 0–1800. A value of zero (0) indicates that this router is
not a default router on this interface. Nonzero values indicate that the router is
a default router on this interface. Nonzero values should not be less than the
router advertisement interval.