Ip Igmp-Proxy - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

ip igmp-proxy

[ no ] ip igmp-proxy [ version { 2 | 3 } ]
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Enables IGMP proxy on an interface and specifies the version. Version 2 is enabled
Description
by default. The no version disables IGMP proxy for an interface.
Options
Interface Configuration
Mode
2 Specifies IGMP proxy version 2
3 Specifies IGMP proxy version 3
Chapter 10: I Commands
827
ip igmp-proxy