Max-Sessions - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

max-sessions

For RADIUS:
Syntax
max-sessions sessionLimit
no max-sessions
For AAA domain map and tunnel group tunnels:
max-sessions maxSessionsPerTunnel
{ no | default } max-sessions
For L2TP:
max-sessions maxSessionsPerProfile
{ no | default } max-sessions
Command introduced before JUNOSe Release 7.1.0.
Release Information
For RADIUS, specifies the number of outstanding requests to a server. The no version
Description
reverts to the default value.
For AAA domain map, and tunnel group tunnels , sets the maximum sessions per
tunnel. The no version disables the feature. The default version sets the value to
zero.
For L2TP, sets the maximum sessions allowed for destination and host profiles by
the LNS. The no and default versions disable the feature.
Options
sessionLimit Maximum number of outstanding requests to a specific server in
the range from 10 through to the maximum value; default value is 255
For information about the number of concurrent RADIUS requests that the router
supports for authentication and accounting servers, see JUNOSe Release Notes,
Appendix A, System Maximums.
maxSessionsPerTunnel Maximum number of sessions that can be configured
on a tunnel in the range 0–4294967295; default value is zero
maxSessionsPerProfile Maximum number of sessions that can be established
at the LNS for a destination or host profile; in the range from 1 through to a
maximum of the chassis-wide limit; default value is the chassis-wide limit
For information about the maximum number of L2TP sessions supported per
chassis, see JUNOSe Release Notes, Appendix A, System Maximums.
Chapter 13: M Commands
1301
max-sessions