Color-Aware - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

color-aware

[ no ] color-aware
Syntax
Command introduced in JUNOSe Release 7.2.0.
Release Information
Configures rate-limit profile to operate in color-aware mode. (Supported only on
Description
hierarchical rate limits.) Color-aware rate limits can change the algorithm used
depending on the color of the incoming packet, which might have been set in the
previous rate limit, in a policy action, or in an earlier policy. The no version restores
the default value, which is not color-aware.
Rate Limit Profile Configuration
Mode
Related Topics
Creating a Two-Rate Rate-Limit Profile
Chapter 4: C Commands
443
color-aware