Instance-Interface-Type - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

instance-interface-type

instance-interface-type {instanceInterfaceType | set | superset }
Syntax
no instance-interface-type { instanceInterfaceType | all }
Command introduced in JUNOSe Release 7.1.0.
Release Information
lag keyword added in JUNOSe Release 8.1.0.
set and superset keywords added in JUNOSe Release 9.2.0.
Assigns an instance-interface type to a QoS parameter definition. Instance-interface
Description
types indicate the interfaces for which QoS clients can assign QoS parameter
instances. You can specify up to eight instance-interface types for each parameter
definition. The no version removes the specified instance-interface type from the
parameter definition.
Options
QoS Parameter Definition
Mode
Related Topics
instanceInterfaceType One of the following instance-interface types: atm, atm-vc,
atm-vp, bridge, ethernet, fr-vc, ip, ip-tunnel, ipv6, lag, l2tp-session, l2tp-tunnel,
lsp, pppoe, serial, server-port, svlan, vlan
set Specifies an interface set as an instance-interface type
superset Specifies an interface superset as an instance-interface type
all Removes all instance-interface types
Configuring a Basic Parameter Definition for QoS Administrators
Creating a QoS Parameter on an Interface Superset or Interface Set
Chapter 10: I Commands
717
instance-interface-type