Clear Ip Prefix-Tree - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

clear ip prefix-tree

clear ip prefix-tree [ treeName [ network/length ] ]
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Clears all prefix trees, the specified prefix tree, or the specified entry from the
Description
specified prefix tree. There is no no version.
Options
Privileged Exec, User Exec
Mode
402
clear ip prefix-tree
treeName Name of the prefix list; string of up to 32 characters
network Base address of the network route to be filtered; for example,
192.168.32.0 or 10.10.0.0
length Length of the network prefix; number of bits masking base address to
produce address to be matched