Clear Mpls Dynamic-Interfaces On-Major-Interfaces - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

clear mpls dynamic-interfaces on-major-interfaces

clear mpls dynamic-interfaces [ ip | ipv6 ] on-major-interfaces
Syntax
[ interfaceType interfaceSpecifier ]
Command introduced in JUNOSe Release 7.2.0.
Release Information
Removes and re-creates both dynamic IPv4 interfaces and dynamic IPv6 interfaces
Description
that are on top of all MPLS major interfaces or on top of the specified MPLS major
interface. There is no no version.
Options
Privileged Exec
Mode
428
clear mpls dynamic-interfaces on-major-interfaces
ip Specifies that only IPv4 dynamic interfaces are removed and re-created
ipv6 Specifies that only IPv6 dynamic interfaces are removed and re-created
interfaceType Interface type; see "Interface Types and Specifiers" on page 5
interfaceSpecifier—Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5