Clns Configuration-Time - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

clns configuration-time

clns configuration-time configTime
Syntax
no clns configuration-time
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the rate at which ES hellos and IS hellos are sent. The no version restores
Description
the default value, 10 seconds.
Options
Global Configuration
Mode
434
clns configuration-time
configTime Number in the range 1–65535; rate in seconds at which ES and IS
hello packets are sent; default value is 10 seconds