Clear Mpls Ldp - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

clear mpls ldp

clear mpls ldp [ prefix destAddr [ maskLen | mask ] | neighbor [ neighborAddress ] ]
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Removes and reestablishes existing LDP LSPs, thereby forcing the reapplication of
Description
policies on the reestablished topology-driven LDP LSPs. You can clear all LDP LSPs
or limit the clearance to only LSPs to a specified prefix or neighbor. Affects the data
traffic on LSPs that are in use when the command is issued. There is no no version.
Options
Privileged Exec
Mode
destAddr IP address of the prefix to be cleared
maskLen Length of the prefix to be cleared; number in the range 0–32
mask Mask for the prefix to be cleared
neighborAddress IP address of a neighbor 32-bit dotted-decimal format of the
entry to be cleared
Chapter 4: C Commands
429
clear mpls ldp