Clear Ipv6 Tunnel-Routes - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

clear ipv6 tunnel-routes

clear ipv6 tunnel-routes [ ipv6Prefix | * ]
Syntax
Command introduced in JUNOSe Release 7.1.0.
Release Information
Clears and then refreshes IPv6 routes from the tunnel routing table. To clear the
Description
routes for a specific IPv6 network, specify the IPv6 prefix. To clear all dynamic IPv6
routes, use the * (asterisk) option. There is no no version.
Options
Privileged Exec
Mode
420
clear ipv6 tunnel-routes
ipv6Prefix IPv6 network for which to clear route information
* Clears all dynamic IPv6 routes