Clns Holding-Time - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

clns holding-time

clns holding-time holdTime
Syntax
no clns holding-time
Command introduced before JUNOSe Release 7.1.0.
Release Information
Allows the sender of an ES hello or IS hello to specify the length of time you consider
Description
the information in the hello packets to be valid. The no version restores the default
value, 30 seconds.
Options
Global Configuration
Mode
holdTime Number in the range 1–65535; length of time in seconds during which
the information in the hello packets is considered valid
Chapter 4: C Commands
435
clns holding-time